New Holland Skid Steer Loader L218

THE SUPER BOOM^® ADVANTAGEN
New Holland's patented Super Boom^® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model	ISM / N844LT
Bore/stroke, in (mm)	3.31 x 3.94 (84 x 100)
Displacement, in3 (L)	135 (2.2)
Fuel injection	HPCR Direct
Air intake	Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp (kW)	60 (45) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW)	57 (42) @ 2800 rpm
Peak torque, lb-ft (Nm)	135 (183) @ 1800 rpm

Power Train
Travel speed, low range, mph (km/h)	7.4 (11.9)
Travel speed, high range (optional),mph (km/h)	10.8 (17.4)

Dimensions
HEIGHT TO
Bucket hinge pin, in (mm)	120 (3048)
Top of ROPS, in (mm)	77.7 (1974)
Bottom of level bucket, fully raised,in (mm)	113.3 (2877)
Overall length without attachment with coupler, in (mm)	105.7 (2697)
Dump angle, degrees	52°
Dump reach (max height), in (mm)	30.8 (783)
Rollback, bucket on ground, degrees	35°
Rollback, bucket at full height, degrees	88°
Wheelbase, in (mm)	44.4 (1128)
Ground clearance (bottom of belly pan),in (mm)	7 (178)
Angle of departure, degrees	23°
Clearance circle without bucket, in(mm)	50.7 (1289)
Clearance circle rear, in (mm)	62.9 (1599)
Rear axle to bumper, in (mm)	36.4 (924)
Overall width, in (mm)	66.1 (1678)

Hydraulic System
Pump flow, Standard Flow, gpm (Lpm)	20.6 (78)
Relief pressure, psi (bar)	3046 (210)
Optional high flow, gpm (Lpm)	30.7 (116.2)

Performance Specs
Rated operating load, 50% tip, lbs (kg)	1800 (818)
Tipping load, lbs (kg)	3600 (1633)
Breakout force, lift cylinder, lbs (kN)	2620 (11.7)
Breakout force, bucket cylinder, lbs (kN)	5550 (24.7)
Operating weight, lbs (kg)	5930 (2690)