Komatsu Wheel Loaders WD600-6
High productivity is the story of the WD600-6 wheeled dozer. The operator has two engine power modes, load sensing hydraulics and a modulated clutch system to harness the 527 horsepower to maximize production when moving mass quantities of soil, coal, chips, slurry or whatever gets in the way.
Model | Komatsu SAA6D170E-5* | |
Type | Water-cooled, 4-cycle | |
Aspiration | Turbo-charged, after-cooled, cooled EGR | |
Number of cylinders | 6 | |
Bore x stroke | 6.69" x 6.69" | 170 mm x 170 mm |
Piston displacement | 1413 in³ | 23.15 ltr |
Governor | All-speed, electronic | |
Horsepower: | ||
SAEJ1995 - Gross | 530 HP | 396 kW |
ISO 9249 / SAEJ1349 - Net | 527 HP | 393 kW |
Hydraulic fan at maximum speed - Net | 502 HP | 374 kW |
Rated rpm | 1800 rpm | |
Fan drive method for radiator cooling | Hydraulic | |
Fuel system | Direct injection | |
Lubrication system: | ||
Method | Gear pump, force-lubrication | |
Filter | Full-flow type | |
Air cleaner | Dry type with double elements and dust evacuator, plus dust indicator | |
EPA Tier 3 and EU stage 3A emissions certified. |
Torque converter: | ||
Type | 3-element, single-stage, double-phase | |
Transmission: | ||
Type | Full-powershift, planetary type | |
Travel speed | Measured with 35/65-33 tires | |
Speed: | Forward (Lock-up clutch ON) |
Reverse |
1st | 4.2 mph 6.7 km/h |
4.5 mph 7.3 km/h |
2nd | 7.3 mph 11.7 km/h(7.7 mph 12.4 km/h) |
8.0mph 12.8 km/h |
3rd | 12.6 mph 20.3 km/h(13.5 mph 21.7 km/h) |
13.7 mph 22.0 km/h |
4th | 20.5 mph 33.0 km/h(23.4 mph 37.7 km/h) |
22.4 mph 36.0 km/h |
Drive system | Four-wheel drive. |
Front | Fixed, full-floating. |
Rear | Center-pin support, full-floating, 26° total oscillation. |
Reduction gear | Spiral bevel gear |
Differential gear | Conventional type |
Final reduction gear | Planetary gear, single reduction |
Service brakes | Hydraulically actuated, wet disc brakes actuate on four wheels |
Parking brake | Wet disc brake |
Emergency brake | Parking brake is commonly used |
Type | Articulated type, full-hydraulic power steering | |
Steering angle | 43° each direction. | |
Minimum turning radius at the center of outside tire | 23'3" | 7075 mm |
Steering system: | ||
Hydraulic pump | Piston pump | |
Capacity at rated rpm | 43.1 U.S. gal/min | 163 ltr/min |
Relief valve setting | 4,980 psi | 34.3 MPa 350 kgf/cm² |
Hydraulic cylinders: | ||
Type | Double-acting, piston type. | |
Number of cylinders | 2 | |
Bore x stroke | 5.1" x 20" | 130 mm x 510 mm |
Loader control: | ||
Hydraulic pump | Piston pump | |
Capacity at rated rpm | 47.6 + 47.6 U.S. gal/min | 180 + 180 ltr/min |
Relief valve setting | 3,560 psi | 24.5 MPa 250 kgf/cm² |
Hydraulic cylinders: | ||
Type | Double-acting, piston type | |
Number of cylinders: | Bore x Stroke: | Bore x Stroke: |
Blade lift - 1 | 6.3" x 42.5" | 160 mm x 1080 mm |
Tilt and pitch - 2 | 7.0" x 9.3" | 180 mm x 237 mm |
Control valve | 3-spool type | |
Control positions: | ||
Blade lift | Raise, hold, lower, and float | |
Tilt and pitch | Tilt-left, tilt-right, hold, pitch forward and back | |
Hydraulic cycle time | ||
Raise | 2.0 sec | |
Lower | 1.3 sec | |
Tilt (left / right) | 0.8 / 1.1 sec | |
Pitch (front / rear)mage | 2.1 / 1.6 sec |
Cooling system | 38.8 U.S. gal | 147 ltr |
Fuel tank | 189.7 U.S. gal | 718 ltr |
Engine | 22.7 U.S. gal | 86 ltr |
Hydraulic system | 117.0 U.S. gal | 443 ltr |
Axle: | ||
Front | 41.0 U.S. gal | 155 ltr |
Rear | 41.0 U.S. gal | 155 ltr |
Torque converter and transmission | 21.9 U.S. gal | 83 ltr |