Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Hooper Bay, Alaska

If you have been on the lookout for a personalized service that caters to all your construction equipment rental needs in Hooper Bay, all you have to do is to ring our toll free number or submit the contact form (on the right).

You can kick start your construction project in no time as all necessary equipment, right from jacks, ladders, power tools, etc. to heavy machinery such as backhoes, boom lifts, excavators and high each equipment, would be made available to you by our vendors within days!

Yes, since we do not have a small number of vendors but a huge network, you need not worry whether certain heavy construction equipment would be available in Hooper Bay or not.

We taken pride in offering a highly personalized service to contractors in the construction industry; we will not just match with vendors but also advise you on what’s best for your project if the need be.

Equipment Rental Hooper Bay, Construction equipment rental Hooper Bay, Construction rental Hooper Bay, Heavy Equipment Rental Hooper Bay.

Push Around Vertical Mast Lift 19AMI

JLG Push Around Vertical Mast Lift 19AMI
Key Specs

  • Machine Width: 2 ft 10 in. / 0.86 m
  • Platform Height: 19 ft 4 in. / 5.89 m

Key Features

  • Most rigid mast in the industry for operator comfort and stability
  • Six-wheel design for improved maneuverability
  • Long battery duty cycles and an automatic charger for more productivity
  • No outriggers
Dimensional Data
Wheel Size - Front Caster 6 x 2"
Ground Entry Height 1 ft 7 in. / 0.48 m
Machine Height 6 ft 6 in. / 1.98 m
Machine Length 4 ft 5 in. / 1.33 m
Machine Width 2 ft 10 in. / 0.86 m
Platform Dimension A 2 ft 2 in. / 0.66 m
Platform Dimension B 2 ft 4 in. / 0.71 m
Platform Height 19 ft 4 in. / 5.89 m
Wheel SIze - Rear 10 x 2"
Reach Specifications
Platform Height 19 ft 4 in. / 5.89 m
Working Height 25 ft / 7.62 m
Maximum Lift Height 19 ft / 5.89 m
Outriggers or Stabilizers No
Platform Capacity 350 lb / 158.76 kg
Machine Weight-DC 1130 lb / 512.56 kg

Komatsu Dozers D65WX-17 WH

D65WX-17 WH Waste Handling Dozer

Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

New Holland Backhoe Loaders  B110C

Engine Power 82 Kw/110 hp
Max digging depth 5750 mm
Maximum Reach 6815 mm

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics