Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Moose Pass, Alaska

If you have been on the lookout for a personalized service that caters to all your construction equipment rental needs in Moose Pass, all you have to do is to ring our toll free number or submit the contact form (on the right).

You can kick start your construction project in no time as all necessary equipment, right from jacks, ladders, power tools, etc. to heavy machinery such as backhoes, boom lifts, excavators and high each equipment, would be made available to you by our vendors within days!

Yes, since we do not have a small number of vendors but a huge network, you need not worry whether certain heavy construction equipment would be available in Moose Pass or not.

We taken pride in offering a highly personalized service to contractors in the construction industry; we will not just match with vendors but also advise you on what’s best for your project if the need be.

Equipment Rental Moose Pass, Construction equipment rental Moose Pass, Construction rental Moose Pass, Heavy Equipment Rental Moose Pass.

 Komatsu Dozer D85EX-15
D85EX-15 Crawler Dozer
The low ground pressure D85PX-15 has the ability to work in underfoot conditions that most big, powerful Komatsu dozers would shy away from. Couple that stability with hydrostatic steering, very precise hydraulic control and a grade system and you've got an incredible production tractor or very large grading tractor.

Engine
Model Komatsu SAA6D125E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.92" x 5.9" 125 mm x 150 mm
Piston displacement 674 in³ 11.04 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 266 HP 199 kW
ISO 9249 / SAE J1349* / Net 240HP 179 kW
Hydraulic fan at maximum speed / Net 240 HP 179 kW
Rated rpm 1900 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
EPA Tier 3 and EU stage 3A emissions certified.
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter and a planetary gear, multiple-disc clutch transmission which is hydraulically-actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral switch helps prevent accidental starts.
Travel speed: Forward: Reverse:
1st 2.1 mph3.3 km/h 2.7 mph 4.4 km/h
2nd 3.7 mph 6.0 km/h 4.9 mph 7.9 km/h
3rd 6.2 mph 10.0 km/h 7.9 mph 12.7 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket rims are bolt-on for easy replacement.
Steering System
PCCS lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn.

Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.

Minimum turning radius 7'4" 2.24 m
Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Track shoes Lubricated tracks. Unique seals prevent entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 8
Type of shoes (standard) Single grouser
Number of shoes (each side) 45
Grouser height 2.8" 72 mm
Shoe width (standard) 36" 910 mm
Ground contact area 9,820 in² 63340 cm²
Ground pressure(with dozer, cab and ROPS) 6.3 psi 0.44 kg/cm² / 43.1 kPa
Track gauge 7'5" 2250 mm
Length of track on ground 11'5" 3480 mm
Coolant and Lubricant Capacity (refill)
Fuel tank 129 U.S. gal 490 ltr
Coolant 15.3 U.S. gal 58 ltr
Engine 10.0 U.S. gal 38 ltr
Torque converter, transmission, bevel gear, and steering system 15.9 U.S. gal 60 ltr
Final drive (each side) 6.9 U.S. gal 26 ltr
Operating Weight
Tractor weight:
Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 51,810 lb 23500 kg
Operating weight:
Including Semi-U tilt dozer or straight tilt dozer, multi-shank ripper, steel cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 60,960 lb 27650 kg
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control units: 2 x axial piston motors
All spool valves externally mounted beside the hydraulic tank. Plunger type hydraulic pump with capacity (discharge flow) of 195 ltr/min 51.5 U.S. gal/min at rated engine rpm.
Relief valve setting 3,270 psi 22.6 MPa 230 kg/cm²
Control valves:
Spool control valves for tilt dozer:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Hydraulic cylinders Double-acting, piston
Number of cylinders: Bore Bore
Blade lift / 2 3.9" 100 mm
Blade tilt / 1 5.9" 150 mm
Ripper lift / 2 5.1" 130 mm
Hydraulic oil capacity (refill):
Straight tilt dozer 17.7 U.S. gal 67 ltr
Semi-U tilt dozer 17.7 U.S. gal 67 ltr
Ripper equipment (additional volume):
Multi-shank ripper 2.9 U.S. gal 11 ltr

John Deere Crawler Dozers 450J LGP
Push productivity to the next level.

Often imitated but never duplicated, the John Deere 450J Dozer continues to set the standard for operator control and productivity. Backed by 30-plus years of hydrostatic experience, its unique state-of-the-art Total Machine Control (TMC) enables an operator to customize machine operation and response to personal preferences. Coupled with an uncommonly smooth full-feature hydrostatic transmission, the 450J delivers unsurpassed productivity, uptime, and daily operating costs. That's for starters.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech M 4045
Net Power, kW (hp) @ Rated rpm 52 (70) @ 2200
Displacement, L (cu in) 4.5 (276)
Transmission
Transmission Manufacturer Hydrostatic
Speed Range - forward 1
Speed Range - reverse 1
Maximum Speeds Forward, kph (mph) 8 (5)
Maximum Speeds Reverse, kph (mph) 8 (5)
Final Drives
Type Triple Reduction
Steering
Type Hydrostatic
Hydraulic System
Pump Type Gear Type Pump
Pump Flow, L/min (gpm) 57 (15)
System pressure, kPa (psi) 20680 (3000)
Undercarriage
Track Gauge, mm (ft in) 1651 (5 ft 5 in)
Length of Track on Ground, mm (ft in) 2184 (7 ft 2 in)
Standard shoe type Single Grouser
Ground Contact Area, cm sq (sq in) 26632 (4128)
Ground Pressure, kPa (psi) 29.3 (4.3)
No. of Track Rollers 6
Track Pitch, mm (in) 160 (6.3)
Track Shoes, each side 40
Track Oscillation --
Dozer
Blade Width, mm (ft in) 2921 (9 ft 7 in)
Blade Height, mm (ft in) 955 (3 ft 2 in)
SAE Blade Capacity, cu m (cu yd) 2 (2.6)
Blade Lift Height, mm (ft in) 772 (2 ft 6 in)
Digging Depth, mm (in) 528 (20.8)
Overall Width with Blade Angled, mm (ft in) not published
Blade Tilt, mm (ft in) 399 (1 ft 4 in)
Dimensions
Height w/ROPS, mm (ft in) 2747 (9 ft )
Length w/Dozer, mm (ft in) 4013 (13 ft 2 in)
Ground Clearance, mm (in) 345 (13.6)
Capacities
Fuel Tank, L (gal) 178 (47)
Hydraulic Reservoir, L (gal) 32.2 (8.5)
Weight
SAE Operating Weight, kg (lb) 7949 (17525)

A large number of construction industry and warehouse management professionals now look at forklift rentals in Ruby Valley as a clear alternative to the heavy cost of ownership and maintenance issues. Not just in case of temporary demands, renting forklifts may be a viable option even when you need reach or telescopic forklifts for a long duration of time. However, it is in case of short term rentals that you save the most. The bottom line is that you get to choose what you really want.

We have on-board a large number of credible, pre-screened suppliers having ready-to-rent forklifts in Ruby Valley who can provide you with any number of forklifts or accessories on short notice. Yes, the equipment can be made available in as little as one day!

And the good news is that you need not worry about the delivery services, inflexible rental terms or rental duration. You can rent one or more forklifts for just one day or several weeks at a stretch as per the requirements for a task at hand.

Submit a request today by filling up the online contact form and we will match you against the best forklift rentals in close proximity of jobsite or warehouse. You can start talking to representatives of some of the most trusted equipment rental companies within few hours!

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics