Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Point Hope, Alaska

If you have been on the lookout for a personalized service that caters to all your construction equipment rental needs in Point Hope, all you have to do is to ring our toll free number or submit the contact form (on the right).

You can kick start your construction project in no time as all necessary equipment, right from jacks, ladders, power tools, etc. to heavy machinery such as backhoes, boom lifts, excavators and high each equipment, would be made available to you by our vendors within days!

Yes, since we do not have a small number of vendors but a huge network, you need not worry whether certain heavy construction equipment would be available in Point Hope or not.

We taken pride in offering a highly personalized service to contractors in the construction industry; we will not just match with vendors but also advise you on what’s best for your project if the need be.

Equipment Rental Point Hope, Construction equipment rental Point Hope, Construction rental Point Hope, Heavy Equipment Rental Point Hope.

John Deere Backhoe Loader 310K EP

We take back(hoe) talk seriously.

A 310K EP that meets Interim Tier 4 (IT4) standards without after-treatment components and diesel particulate filters (DPFs) is just the beginning. It's an excellent choice for large fleets and rental yards. Don't let the 310K EP's competitive price fool you. There's nothing light duty about it. Plus, it comes equipped, not stripped. With many of the same features found on our other backhoes loader, it's the value leader in the 4.26-m (14 ft.) class.

With John Deere WorkSightTM, JDLinkTM monitoring provides real-time machine utilization and health data, plus location information. Machine health prognostics proactively suggests maintenance to correct problems early before they turn into costly downtime. And remote diagnostics and programming enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech E 4045HT072
Net Power, kW (hp) @ Rated rpm 52 (70) @ 2000
Displacement, L (cu in.) 4.5 (275)
electrical
Voltage 12
Alternator amps 90
transmission
Type Powershift
Max. Travel Speed - fwd, kph (mph) 29.9 (18.6)
Max. Travel Speed - rev, kph (mph) 12 (7.5)
Brakes
Type Wet Multi Disc
Actuation Hydraulic w/Power Assist
hydraulic system
Pump Type Gear Type Pump
Pump Flow, L/min (gpm) 106 (28)
System Pressure, kPa (psi) 24993 (3625)
Backhoe, Fixed length dipperstick
Max. Digging Depth, mm (ft in) 5460 (17 ft 11 in)
2ft (0.61m) Flat Bottom, mm (ft in) 4320 (14 ft 2 in)
Reach from Swing Center, mm (ft in) 5440 (17 ft 10 in)
Truck Loading Height, mm (ft in) 3330 (10 ft 11 in)
Digging Force Crowd, kN (lb) 31.2 (7006)
Bucket, Power Dig, kN (lb) 49.4 (11106)
deere lift capacities are according to sae j31
Max. Digging Depth, mm (ft in) 5460 (17 ft 11 in)
2ft (0.61m) Flat Bottom, mm (ft in) 4320 (14 ft 2 in)
Reach from Swing Center, mm (ft in) 5440 (17 ft 10 in)
Truck Loading Height, mm (ft in) 3330 (10 ft 11 in)
Digging Force Crowd, kN (lb) 31.2 (7006)
Bucket, Power Dig, kN (lb) 49.4 (11106)
Deere figures listed are 87% of the max lift force available
Boom Lift Cap. @ Ground Level, kg (lb) 1154 (2545)
Dipperstick Lift Capacity @ 12' Height, kg (lb) 2204 (4859)
backhoe, standard bucket
SAE Heaped Capacity, cu m (cu ft) 0.18 (6.5)
Backhoe Bucket Width, mm (in) 305 (12)
Bucket Rotation, deg 190
Loader
SAE Heaped Capacity, cu m (cu yd) 0.77 (1)
Loader Bucket Width, mm (in) 2184 (7 ft 2 in)
Breakout force, kN (lb) 41.6 (9350)
Lift Capacity to Full Height, kg (lb) 2996 (6600)
Dump Clearance @ 45 deg, mm (ft in) 2690 (8 ft 10 in)
Dump Reach, mm (in) 785 (30.9)
Bucket Hinge Pin Max. Height, mm (ft in) 3380 (11 ft 1 in)
Coupler (Mechanical, Hydraulic) Option
Two wheel drive
Wheelbase, mm (in) 2110 (6 ft 11 in)
Curb Turning Radius w/out Brakes, mm (ft in) 3940 (12 ft 11 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3440 (11 ft 3 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5380 (17 ft 8 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 4945 (16 ft 3 in)
Four WHEEL DRIVE
Wheelbase, mm (in) 2140 (7 ft )
Curb Turning Radius w/out Brakes, mm (ft in) 4080 (13 ft 5 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3580 (11 ft 9 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5525 (18 ft 2 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 5055 (16 ft 7 in)
dimensions
Transport Height, mm (ft in) 3430 (11 ft 3 in)
Transport Length, mm (ft in) 7090 (23 ft 3 in)
Transport Width, mm (ft in) 2180 (7 ft 2 in)
Width Over Tires, mm (in) 2180 (7 ft 2 in)
capacities
Fuel Tank, L (gal) 155.2 (41)
Hydraulic Reservoir, L (gal) 37.1 (9.8)
weight 2wd, rops
SAE Operating Weight, kg (lb) 6142 (13540.7)
Metric Ton Weight, kg (lb) 6.142 (13.541)
WEIGHT 4WD, cab, ext.hoe
SAE Operating Weight, kg (lb) 6510 (14352)
Metric Ton Weight, kg (lb) 6.51 (14.352)

New Holland Compact Excavators E55BX

Compact Excavators E55Bx

BOOST YOUR PRODUCTIVITY, FUEL SAVINGS AND COMFORT.
The versatile new E55Bx compact excavator not only allows you to excavate, grade and backfill with one machine, it allows you to save fuel and time while doing it. The E55Bx features a new fuel-saving mode that reduces fuel consumption by 20% compared to high-idle mode. You position the throttle to one of three positions—low, “S” for fuel-saving, and “H” for high idle.

Engine
Model 4TNV88 BXPYBD
Displacement, cu in (l) 133.5 (2.2)
Horsepower SAE NET, hp (kW) @ rpm 37.9 (28.3) @ 2400 rpm
Dimensions, FT (M)
Arm length 5’ 6.5” (1.69)
Boom length 9’ 6” (2.89)
Overall length 18’ (5.5)
Overall width (collapsed) -
Overall width (expanded) 6’ 5” (1.96)
Overall height (to top of canopy) 8’ 3” (2.53)
Base machine length 9' 7" (2.92)
Ground clearance of rear end 2’ 0.5” (0.625)
Center distance of tumblers 6’ 6” (2.0)
Overall length of crawler 8’ 2” (2.5)
Track gauge (collapsed) -
Track gauge (expanded) 5' 1" (1.56)
Width of crawler shoe (rubber) 15.7” (400)
Ground clearance of undercarriage 12” (0.32)
Base machine weight, lb (kg) 12,295 (5130)
Base machine weight with bucket, lb (kg) -
Working weight, lb (kg) 11,309 lbs (5130 kg)
Travel speed (turtle), mph (km/h) 1.4 (2.2)
Travel speed (rabbit), mph (km/h) 2.5 (4.0)
Drawbar pull force, lb (kN) 12,342 (54.9)
Arm breakout force, SAE lbf (kN) 5,328 (23.7)
Arm breakout force, ISO lbf (kN) -
Bucket breakout force, SAE lbf (kN) 6,992 (31.1)
Bucket breakout force, ISO lbf (kN) -
Max digging reach 20’ 5” (6.24)
Max digging reach at ground level 20’ (6.10)
Max digging depth 12’ 9” (3.90)
Max digging height 19’ 5” (5.93)
Max dumping clearance 14' 3" (4.35)
Min dumping clearance 5' 2" (1.58)
Max vertical wall digging depth 10’ 3” (3.14)
Min front swing radius 7' 4" (2.25)
Height at min front swing radius 14' 8" (4.48)
Horizontal digging stroke - ground level 9' 10" (3.00)
Ground pressure, psi (kPa) 4.19 (28.9)

New Holland Compact Excavators E18B

New Holland Compact Excavators E18B
PACKS MORE POWER PER SQUARE FOOT. THAT'S NEW HOLLAND SMART.
New Holland compact excavators deliver powerful performance, including leading bucket breakout force, maximum swing torque, excellent dig depth, superior drawbar pull force. And they fit this performance into a maneuverable compact package.

Engine
model L3E-W231KBS
Displacement, cu in (l) 58.1 (952)
Displacement, in³ (L) 58.1 (952)
Horsepower SAE NET, hp (kW) @ rpm 15.2@2,200 (11.3 @ 2,200)
Dimensions,FT(M)
-
Arm length 3'3" (0.98)
Boom length 5'9" (1.75)
Overall length 11'3" (3.42)
Overall width (collapsed) 3'3" (0.99)
Overall width (expanded) 4'4" (1.32)
Overall height (to top of canopy) 7'6" (2.35)
Base machine length 6'2" (1.89)
Ground clearance of rear end 1'6" (0.45)
Center distance of tumblers 4'0" (1.21)
Overall length of crawler 5'1" (1.56)
Track gauge (collapsed)
Bucket, ft/in (m)
2'6" (0.76)
Track gauge (expanded) 3'7" (1.09)
Width of crawler shoe (rubber) 0'9" (0.23)
Ground clearance of undercarriage 0'7" (0.18)
Base machine weight, lb (kg) -
Base machine weight with bucket, lb (kg) 3,638 (1,650)
Working weight, lb (kg) -
Travel speed (turtle), mph (km/h) 1.2 (2.0)
Travel speed (rabbit), mph (km/h) 2.5 (4.0)
Drawbar pull force, lb (kN) 4,474 (19.9)
Arm breakout force, SAE lbf (kN) 2,158 (9.6)
Arm breakout force, ISO lbf (kN) 2,248 (10.0)
Bucket breakout force, SAE lbf (kN) 2,900 (12.89)
Bucket breakout force, ISO lbf (kN) 3,417 (15.2)
Max digging reach 12'9" (0.98)
Max digging reach at ground level 12'5" (3.89)
Max digging depth 7'1" (2.15)
Max digging height 12'1" (3.68)
Max dumping clearance 8'8" (2.65)
Min dumping clearance 3'3" (1.00)
Max vertical wall digging depth 5'5" (1.66)
Min front swing radius 5'1" (1.56)
Height at min front swing radius 9'0" (2.75)
Horizontal digging stroke - ground level 5'7" (1.70)
Ground pressure, psi (kPa) 3.99 (27.5)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics