Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Point Lay, Alaska

If you have been on the lookout for a personalized service that caters to all your construction equipment rental needs in Point Lay, all you have to do is to ring our toll free number or submit the contact form (on the right).

You can kick start your construction project in no time as all necessary equipment, right from jacks, ladders, power tools, etc. to heavy machinery such as backhoes, boom lifts, excavators and high each equipment, would be made available to you by our vendors within days!

Yes, since we do not have a small number of vendors but a huge network, you need not worry whether certain heavy construction equipment would be available in Point Lay or not.

We taken pride in offering a highly personalized service to contractors in the construction industry; we will not just match with vendors but also advise you on what’s best for your project if the need be.

Equipment Rental Point Lay, Construction equipment rental Point Lay, Construction rental Point Lay, Heavy Equipment Rental Point Lay.

John Deere Scraper Systems 9520RT
9520RT
Why walk when you can run? The New 9RT Series Tractors are built to defy convention. With more engine horsepower (470 - 570 engine hp) and efficient FT4 engine technology, these machines welcome a good challenge. Just when you think there isn't any room for more, we outfitted the 9RT's with the new CommandViewTM III cab. It delivers more space, comfort and convenience than before, with a few features you might not expect. A new and improved e18TM Transmission with Efficiency Manager also adds to the appeal by providing the smoothest shifting power shift in the market, with an additional automatic mode. Get ready run!

FEATURES & SPECS

  • John Deere PowerTechTM 13.5L PSS
  • New and improved e18TM PowerShift Transmission
  • AirCushion Suspension System
  • New CommandViewTM III cab
Horsepower: 520 engine hp
Hydraulic Capacity: 115 U.S. gpm (435 L/min) standard
Drawbar Support: Available for long or short scraper drawbars

John Deere Scraper Systems 1814E
1814E
The 1814E Ejector Scraper is a six-tire scraper that carries 18 cu yd of material and has a 14-ft cutting width. This scraper works well for construction contractors bulk-hauling materials using 360-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 13.2 cu yd
Heaped capacity cubic yards 18 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 26 ft 10 in. 8179 mm
Width, ft, in. (mm) 15 ft 11 in. 4851 mm
Height, ft, in. (mm) 6 ft 7 in. 2007 mm
Bucket dimensions --
Length, ft, in. (mm) 7 ft 8 in. 2337 mm
Width, ft, in. (mm) 14 ft 6 in. 4420 mm
Height, ft, in. (mm) 4 ft 1321 mm
WEIGHT
Approximate shipping weight, lb (kg) 25,800 lb 11,702 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 25%
Wheels 75%
TIRES
Number of tires per scraper 6
Tire sizes --
Standard 17.5 X 25
Option 1 20.5 X 25
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 360 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Yes
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Optional
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

JLG® Telehandler G6-42A

JLG JLG® Telehandler G6-42A
Key Specs

  • Maximum Lift Capacity: 6600 lb / 2993.71 kg
  • Maximum Lift Height: 42 ft 1 in. / 12.84 m
  • Maximum Reach: 30 ft / 9.14 m

Key Features

  • Roomier cab for added comfort and to reduce operator fatigue
  • All-wheel steering for easy maneuverability
  • Full range of attachments for versatility in handling jobsite challenges
  • Single joystick controls for smooth operation of boom movements
  • Power shift transmission provides efficient control
Performance
Breakout Force 12100 lb / 5488.47 kg
Drawbar Pull 20000 lb / 9071.85 kg
Frame Leveling 10 Degrees
Lift Capacity at Full Height 6000 lb / 2721.55 kg
Lift Capacity at Max Reach (Stabs Up) 1000 lb / 453.59 kg
Load Center 2 ft / 0.61 m
Maximum Lift Capacity 6600 lb / 2993.71 kg
Maximum Lift Height 42 ft 1 in. / 12.84 m
Maximum Reach 30 ft / 9.14 m
Outriggers or Stabilizers No
Outside Turning Radius 11 ft 9 in. / 3.59 m
Speed - Maximum Lift 7 sec.
Speed - Maximum Lower 5 sec.
Speed - Maximum Telescope In 10 sec.
Speed - Maximum Telescope Out 14 sec.
Speed - Maximum Travel 23 mph / 37.34 km/h
Dimensional Data
Ground Clearance 1 ft 5 in. / 0.43 m
Machine Height 7 ft 11 in. / 2.42 m
Machine Length 17 ft 9 in. / 5.4 m
Machine Width 8 ft 3 in. / 2.51 m
Tire Size 370/75-28
Track Width 6 ft 10 in. / 2.09 m
Wheelbase 10 ft 8 in. / 3.25 m
Power Source
Capacity - Fuel Tank 38 gal. / 143.85 L
Engine Horsepower 100 hp / 74.60 kW
Engine Manufacturer Cummins
Engine Model QSB3.3L
Maximum Engine RPM 2600 rpm
General
Axle-Front High Bias, Limited Slip
Axle-Rear Oscillating
Function Pump Type Gear
Hydraulic System Pressure 4000 psi / 280.12 Kg/cm2
Operating Vehicle Weight 20890 lb / 9475.54 kg
Service Brake Type Wet Multi-Disc
Transmission - Nr Forward Gears Standard 4
Transmission - Nr Reverse Gears 3
Transmission Type Powershift

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics