Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Concho, Arizona

Our vendors have been servicing the Concho area for many years now and have a solid reputation of providing the latest, high performance heavy construction equipment on rent. If you are about to get started with a construction project in the region, let us help you with provisioning of construction equipment in a time bound manner.

Since we’ve a huge network of vendors with a proven track record of providing the best equipment on hire to small as well as large construction industry players, rest assured that the inventory of equipment is more than enough to meet your varied requirements!

You can communicate your requirements right away by dialing our toll free number or get in touch through the contact form on the right.

We will patiently hear you out, learn about your construction project at hand or ongoing requirements and provide you with the best options to choose from.

Equipment Rental Concho, Construction equipment rental Concho, Construction rental Concho, Heavy Equipment Rental Concho.

John Deere Crawler Dozers 450J LT
Push productivity to the next level.

Often imitated but never duplicated, the John Deere 450J Dozer continues to set the standard for operator control and productivity. Backed by 30-plus years of hydrostatic experience, its unique state-of-the-art Total Machine Control (TMC) enables an operator to customize machine operation and response to personal preferences. Coupled with an uncommonly smooth full-feature hydrostatic transmission, the John Deere Crawler 450J delivers unsurpassed productivity, uptime, and daily operating costs. That's for starters.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech M 4045
Net Power, kW (hp) @ Rated rpm 52 (70) @ 2200
Displacement, L (cu in) 4.5 (276)
Transmission
Transmission Manufacturer Hydrostatic
Speed Range - forward 1
Speed Range - reverse 1
Maximum Speeds Forward, kph (mph) 8 (5)
Maximum Speeds Reverse, kph (mph) 8 (5)
Final Drives
Type Triple Reduction
Steering
Type Hydrostatic
Hydraulic System
Pump Type Gear Type Pump
Pump Flow, L/min (gpm) 57 (15)
System pressure, kPa (psi) 20680 (3000)
Undercarriage
Track Gauge, mm (ft in) 1392 (4 ft 7 in)
Length of Track on Ground, mm (ft in) 2184 (7 ft 2 in)
Standard shoe type Single Grouser
Ground Contact Area, cm sq (sq in) 17755 (2752)
Ground Pressure, kPa (psi) 40.7 (5.9)
No. of Track Rollers 6
Track Pitch, mm (in) 160 (6.29)
Track Shoes, each side 40
Track Oscillation --
Dozer
Blade Width, mm (ft in) 2464 (8 ft 1 in)
Blade Height, mm (ft in) 955 (3 ft 2 in)
SAE Blade Capacity, cu m (cu yd) 1.6 (2.1)
Blade Lift Height, mm (ft in) 772 (2 ft 6 in)
Digging Depth, mm (in) 528 (20.8)
Overall Width with Blade Angled, mm (ft in) not published
Blade Tilt, mm (ft in) 338 (1 ft 1 in)
Dimensions
Height w/ROPS, mm (ft in) 2747 (9 ft )
Length w/Dozer, mm (ft in) 3940 (12 ft 11 in)
Ground Clearance, mm (in) 345 (13.6)
Capacities
Fuel Tank, L (gal) 178 (47)
Hydraulic Reservoir, L (gal) 32.2 (8.5)
Weight
SAE Operating Weight, kg (lb) 7386 (16283)

Komatsu Wheel Loaders WA800-3
WA800-3 Wheel Loader

Bucket capacities from 14.4 to 18.3 yd³, large dump clearance and three boom options, standard, high-lift and short, the WA800-3 has the versatility to work in many types of mines and applications. The WA800-3 has the stability to handle all those buckets and high breakout force to work in tough virgin material. The operator can precisely maneuver such a massive machine using the advanced joystick control at his left hand.

Engine
Model Komatsu SAA12V140E-3
Type Water-cooled, 4 cycle
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 12
Bore x stroke 5.51'' x 6.50'' 140 mm x 165 mm
Piston displacement 1,860 in³ 30.48 ltr
Governor all-speed, electronic
Flywheel horsepower
SAE J1995 - Gross 853 HP 636 kW
ISO 9249/SAE J1349 - Net 808 PS 603 kW
Rated rpm 2000 rpm
Fan drive method for radiator cooling Mechanical
Fuel system Direct injection
Lubrication system
Method Gear pump, force-lubrication
Filter Gear pump, force-lubrication
Air cleaner Dry type with automatic dust ejector and pre-cleaner, cyclopac with vacuator
EPA Tier 2 emissions certified.
Transmission
Torque converter - Type 3-element, single-stage, single-phase
Transmission - Type Full-powershift, planetary type
Travel Speed*
1st Forward 4.3 mph 7.0 km/h
1st Reverse 4.4 mph 7.1 km/h
2nd Forward 7.6 mph 12.3 km/h
2nd Reverse 7.7 mph 12.4 km/h
3rd Forward 17.4 mph 28.0 km/h
3rd Reverse 17.6 mph 28.3 km/h
*Measured with 45/65-45, 46PR (L-5)
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, full-floating
Rear Center-pin support, full-floating, 22° total oscillation
Reduction gear Spiral bevel gear
Differential gear Straight bevel gear
Final reduction gear Planetary gear, single reduction, oil bath
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Dry disc brake
Secondary brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 40° each direction
Minimum turning radius at the center of outside tire 30'2" 9200 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity / at rated rpm 81 U.S. gal/min 307 ltr/min
Relief valve setting 4,550 psi 31.4 MPa 320 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 6.3" x 19.8" 160 mm x 503 mm
Loader control:
Hydraulic pump Piston pump
Capacity / at rated rpm 107 U.S. gal/min 405 ltr/min
Relief valve setting 4,550 psi 31.4 MPa 320 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders—bore x stroke:
Boom cylinder - 2 10.2" x 53.9" 260 mm x 1368 mm
Bucket cylinder - 1 11.8" x 35.7" 300 mm x 906 mm
Control valve spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 11.2 sec
Dump 2.0 sec
Lower (Empty) 4.8 sec
ROPS and Cab
The cab is mounted on viscous damping mounts and is well insulated.
Service Refill Capacities
Cooling system 89.0 U.S. gal 337 ltr
Fuel tank 410.8 U.S. gal 1555 ltr
Engine 34.3 U.S. gal 130 ltr
Hydraulic system 191.5 U.S. gal 725 ltr
Axle (each front and rear) 95.1 U.S. gal 360 ltr
Torque converter and transmission 37.0 U.S. gal 140 ltr


John Deere Motor Graders 870G/GP
Levels everything but the playing field.

It's easy to see why the 870G/GP Motor Grader has become an industry favorite. Visibility is clearly unsurpassed, with a large expanse of floor-to-ceiling tinted glass, narrow front console, and streamlined saddle arms giving way to a commanding view of the work at hand. What's more, the spacious walk-through cab's many amenities provide all of the fatigue-beating comfort and quiet an operator could ever want. So you can count on the kind of productivity you need.

ENGINE
Emission Rating Final Tier 4
Engine Make / Engine Model John Deere / PowerTech PSS 9.0L
Net Peak Power, kW (hp) 198 (265)
Gross Power, kW (hp) not published
Displacement, L (cu in.) 9 (548)
Calculated % Torque rise 53
ELECTRICAL
Volts 24
Alternator amps 100
TRANSMISSION ---
Type ---
Speed Range - Forward 8
Speed Range - Reverse 8
Max. Travel Speed - fwd, kph (mph) 45.5 (28.3)
Max. Travel Speed - rev, kph (mph) ---
FINAL DRIVE
Type Powershift
DIFFERENTIAL LOCK 
Type Tandem
BRAKES
Type ---
System Pressure, kPa (psi) Hydraulic
FRONT WHEEL DRIVE
Type Disc
HYDRAULIC SYSTEM
Pump Type Variable axial piston
Pump Flow, L/min (gpm) 218 (57.5)
System Pressure, kPa (psi) 18961 (2750)
STEERING & ARTICULATION
Frame Type Articulated
Articulation, deg 22
Turn Radius, m (ft in) 7.21 (23 ft 8 in)
Front Wheel Lean, deg ---
BLADE RANGE
Bank Cut Angle, deg 90
Shoulder Reach Outside Wheels, Right, mm (ft in) 2329 (7 ft 8 in)
Shoulder Reach Outside Wheels, Left, mm (ft in) 2329 (7 ft 8 in)
Blade Lift Above Ground, mm (in) 452 (17.8)
Blade Pitch Operation, Adjustment Fwd, deg 42
Blade Pitch Operation, Adjustment Rear, deg 5
Blade Side Shift, Right, mm (in) 683 (26.9)
Blade Side Shift, Left, mm (in) 683 (26.9)
Circle Rotation, deg 360
Circle Diameter, mm (in) 1524 (60)
TIRES
Standard 14.00 - 24
DIMENSIONS
Wheelbase, mm (ft in) 6160 (20 ft 3 in)
Blade Base, mm (ft in) 2530 (8 ft 4 in)
Overall Length, mm (ft in) 8890 (29 ft 2 in)
Height w/ROPS, mm (ft in) 3180 (10 ft 5 in)
Clearance Under Front Axle, mm (in) not published
MOLDBOARD
Length, mm (ft in) 4270 (14 ft )
Thickness, mm (in) 25 (1)
Height, mm (ft) 686 (27)
Optional Moldboard Lengths, mm (ft in) not published
CAPACITIES
Fuel Tank, L (gal) 416.5 (110)
Hydraulic Reservoir, L (gal) 60.5 (16)
weight
SAE Operating Weight, kg (lb) 17019 (37520)
Weight on Front Wheels, kg (lb) 4531 (9990)
Weight on Tandem Wheels, kg (lb) 12487 (27530)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics