Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Kayenta, Arizona

Our vendors have been servicing the Kayenta area for many years now and have a solid reputation of providing the latest, high performance heavy construction equipment on rent. If you are about to get started with a construction project in the region, let us help you with provisioning of construction equipment in a time bound manner.

Since we’ve a huge network of vendors with a proven track record of providing the best equipment on hire to small as well as large construction industry players, rest assured that the inventory of equipment is more than enough to meet your varied requirements!

You can communicate your requirements right away by dialing our toll free number or get in touch through the contact form on the right.

We will patiently hear you out, learn about your construction project at hand or ongoing requirements and provide you with the best options to choose from.

Equipment Rental Kayenta, Construction equipment rental Kayenta, Construction rental Kayenta, Heavy Equipment Rental Kayenta.

Komatsu Excavators PC55MR-3
PC55MR-3 Hydraulic Excavator

You'll be surprised the amount a work 38 horsepower can do when it's harnessed in the PC55MR-3. Constructed like a big Komatsu excavator with a high strength x-frame, PPC joysticks, pattern change valve but with the addition of a swinging boom, three track option and tight tail swing, the  PC55MR-3 Hydraulic Excavator is ready for any challenge you can put in it's way.

Engine
Model Komatsu 4D88E-6
Type Direct injection
Piston displacement 134 in³ 2.19 ltr
Horsepower @ 2400 rpm:
Net (ISO 9249/SAE J1349) 38.2 HP 28.5 kW
Electric System
Operation voltage 12 V
Battery 72 Ah
Alternator 40 A
Starter 2.3 kW
Hydraulic System
Type HydrauMind
Main pump:
Type Variable displacement x 2Gear x 1
Maximum flow 14.1 x 2 + 8.9 gal/min 53.5 x 2 + 33.8 ltr/min
Hydraulic motors:
Travel Variable displacement x 2
Swing Fixed displacement x 1
Maximum pressure setting 3,840 psi 270 kg/cm²
Auxiliary flow 18.5 gal/min 70 ltr/min
Performance
Travel speed:
High 2.9 mph 4.6 km/hr
Low 1.7 mph 2.8 km/hr
Swing speed 9.0 rpm
Ground pressure 4.4 psi 0.31 kg/cm²
Max. drawbar pull 9,440 lb 4280 kg
Gradeability 30°
Bucket digging force (ISO) 8,770 lb 3980 kg
Arm crowd force (ISO) 5,380 lb 2440 kg
Drives and Brakes
Drive method Hydrostatic
Type of travel brake Hydraulic lock
Type of travel shoe Rubber
Undercarriage
Adjustment of the track tension Grease gun
Number of carrier rollers (each side) 1
Number of track rollers (each side) 4
Refill Capacities
Fuel tank 17.2 U.S. gal 65 ltr
Hydraulic tank 5.3 U.S. gal 20 ltr
Engine 2.0 U.S. gal 7.5 ltr ltr
Coolant 2.2 U.S. gal 8.5 ltr
Operating Weight (approximate)
Operating weight(with ROPS canopy and rubber shoe) 11,380 lb 5160 kg
Blade
Width x height 6'5" x 1'2" 1960 x 355 mm

Komatsu Dozers D65PX-17

D65PX-17 Crawler Dozer

The long track, low ground pressure D65PX-17 with hydrostatic steering (HSS) gives the operator incredible control and grading ability, especially in soft or wet conditions. The Tier 4 interim Komatsu engine coupled with the automatic transmission and lock-up torque converter can lower fuel consumption by up to 15%. When the operator takes his seat in the air suspension heated seat and takes command with his left and right palm control joysticks, he will have all the tools he needs to maximize productivity.

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
 8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3"  1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

Komatsu Excavators PC800LC-8 MH
PC800LC-8 MH Material Handler (55'-68' Reach)

If your job calls for a grapple, clam or magnet with a long reach, the PC800LC-8 material handler can provide the right arm and boom combinations you'll need.

Engine
EPA Tier 3 and EU stage 3A emission certified.
Model Komatsu SAA6D140E-5
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed control, electronic
Horsepower:
SAE J1995 (Gross) 496 HP 370 kW
ISO9249 / SAE J1349 (Net) 487 HP 363 kW
Hydraulic fan at maximum speed (Net) 454 HP 338 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Hydraulics System
Type EOLSS (Electronic Open-center Load Sensing System)
Number of selectable working modes 3
Main pump:
Type Two (2) variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 2 x 130.5 U.S. gal/min 2 x 494 ltr/min
Fan drive pump Variable capacity piston type
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 4,120 psi 28.4 MPa 290 kg/cm²
Heavy lift circuit 4,980 psi 34.3 MPa 350 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders: bore x stroke x rod diameter bore x stroke x rod diameter
Boom / 2 8" x 68" x 5" 202 mm x 1727 mm x 127 mm
Arm / 1 (55' front) 9" x 72" x 6" 229 mm x 1829 mm x 152 mm
Arm / 1 (68' front) 8.5" x 72" x 6" 216 mm x 1829 mm x 152 mm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 125,660 lb 559 kN 57000 kg
Gradeability 70%
Maximum travel speed:
High 2.6 mph 4.2 km/h
Low 1.7 mph 2.8 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 6.8 rpm
Swing torque 209,461 ft. lbs. 28968 kg•m
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 51 each side
No. of carrier rollers 3 each side
No. of track rollers 9 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 258.9 U.S. gal 980 ltr
Radiator 26.4 U.S. gal 100 ltr
Engine 15.3 U.S. gal 58 ltr
Final drive, each side 5.3 U.S. gal 20 ltr
Swing drive 2 x 6.5 U.S. gal 2 x 24.5 ltr
Hydraulic tank 116.2 U.S. gal 440 ltr
Operating Weight (approximate)
Operating weight w/o Grapple: 16.8 m / 87796 kg 55' / 193,555 lb
Operating weight w/o Grapple: 20.7 m / 89339 kg 68' / 196,955 lb

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics