Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Marshall, Arkansas

Our vast network of vendors in Marshall Arkansas offers a huge, ready to rent inventory of heavy construction equipment.

Do you have any immediate requirements? Call our toll free number today!

You can also get in touch by filling up the contact form on the right (will take less than a minute).

Several contractors in the region have begun approaching us for flexible construction equipment rental services in Marshall. We have the best suppliers onboard who have a reputation of providing top notch construction tools and heavy machinery; rent agreements are highly flexible and prices affordable. Needless to mention, you need not worry about the pick-and-drop services too.

As you move forward on the growth path, you need a healthy cash flow, strong credit lines and flexibility in deploying the right equipment at the right time for a construction job at hand. We can assist you with the latter very well.

Equipment Rental Marshall, Construction equipment rental Marshall, Construction rental Marshall, Heavy Equipment Rental Marshall.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Trucks HD1500-7
HD1500-7 Off-Highway Truck

The HD1500 has a capacity of 159 tons or 102 yd3. The fully automatic seven speed transmission with lock-up and skip-shift give the operator the speed and response he needs to meet production demands. On down hills, the operator has oil cooled multi-disc retarder and brakes to control his fully loaded truck. A tight turning radius and hydropneumatic suspension make the HD1500-7 very maneuverable in tight quarters and provide a cushioned ride for better load retention and a more comfortable ride.

Engine
Model Komatsu SDA12V160
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled
Number of cylinders 12
Bore x stroke 6.26" x 7.48" 159 mm x 190 mm
Piston displacement 2,746 in³ 45 ltr
Horsepower:
SAE J1995 / Gross 1,487 HP 1109 kW
ISO9249/SAE J1349 / Net 1,406 HP 1048 kW
Rated rpm 1,900 rpm
Fan drive type Mechanical
Maximum torque 5,041 lb ft 697 kg/m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system :
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and pre-cleaned, with dust indicator
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission: Full-automatic, planetary-shaft type
Speed range 7 speeds forward and 1 reverse
Lockup clutch Wet, multiple-disc clutch
Forward Torque converter drive 1st and 2nd gear with direct drive lock-up in 1st through 7th
Reverse Torque converter drive
Shift control Electronic shift control with automatic clutch modulation in all gears
Maximum travel speed 36 mph 58 km/h
Axles
Rear Axle Full-floating
Final drive type Planetary gear
Ratios:
Differential 2.647
Planetary 7.235
Suspension System
Variable rate, hydropneumatic with integral rebound control.
Maximum front stroke 14.76'' 375 mm
Maximum rear stroke 4.17" 106 mm
Rear axle oscillation +/-9.2°
Steering system
Type Fully hydraulic power steering with two double-acting cylinders
Supplementary steering Accumulator assist
Minimum turning radius 40' 12.2 m
Steering angle (left or right) 41°
Cab
Integral 4-post ROPS/FOPS cab structure (meets SAEJ 1040 Apr 88)
Main Frame
Type Box-sectioned structure; Integral front bumper
Brakes
Brakes meet ISO 3450 standard.
Service brakes:
Front Fully hydraulic control, oil-cooled multiple-disc type
Rear Fully hydraulic control, oil-cooled multiple-disc type
Parking brake Spring applied, oil-released, 3 caliper dry disc mounted on input yoke to differential
Retarder Oil-cooled, multiple-disc front and rear brakes act as retarder
Secondary brake Manual - push button operated.
Automatically applied prior to hydraulic system pressure dropping below established level.
Brake surface: 24,668 in² 159148 cm³
Body
Capacity:
Struck 71 yd³ 54 m³
Heaped (2:1 ,SAE) 102 yd³ 78 m³
Nominal payload 158.9 U.S. tons 144.1 metric tons
Material 400 Brinell hardness high tensile strength steel (front, sides, and bottom)
Structure Flat floor configuration
Material thickness:
Bottom 0.75" 19 mm
Front 0.47" 12 mm
Sides 0.35" 9 mm
Target area: (inside length x width) 25'2"x 18'9" 7670 mm x 5705 mm
Dumping angle 45°
Height at full dump 37'6" 11440 mm
Heating Exhaust heating
HyDRaulic System
Hoist cylinder Two, 3-stage telescopic type
Relief pressure 2,750 psi 19.0 MPa 193.4 kg/cm²
Hoist time
Raise 15 sec
Lower 15 sec
Weight (approximate)
Empty weight 232,144 lb 105300 kg
Max. gross vehicle weight: 550,000 lb 249478 kg
Not to exceed max. gross vehicle weight, including options, fuel and payload.
Empty weight is with 100% fuel and operator.
Weight distribution:
Empty:
Front axle 48.6%
Rear axle 51.4%
Loaded:
Front axle 32.8%
Rear axles 67.2%
tires
Standard Tires 33.00 R51
Service Refill Capacities
Fuel tank 560 U.S. gal 2120 ltr
Engine oil 51 U.S. Gal 193 ltr
Hydraulic system 238 U.S. gal 900 ltr
Differentials 78 U.S. gal 297 ltr
Final drives (total) 63.5 U.S. gal 240 ltr
Transmission 40.5 U.S. gal 153 ltr

JCB Telescopic Handler 510-56
510-56
The first of our range to benefit from our wide set stabilizers. The high boom design allows for capacities of 10,000 pounds and a lift height of 56 feet. This model is ideal for masonry and framing applications and is a must for all rental fleets.

This easy to operate telescopic handler is equipped with low effort servo controls that are arranged in a pattern style that most operators are accustomed to. The 'low effort' doesn't just stop at operating the machine - with proven reliability and easy access to the side mounted engine for the daily checks, this machine is one of the easiest machines to maintain on the market today.

Lift Performance
Maximum Lift Capacity 10,000lb (4,537kg)
Maximum Lift Height 56' 0" (17m 07)
Engine
Maximum Engine Power 109hp (81kW)

JCB Telescopic Handler 506-36
506-36
The high boom design of our smallest "Lift & Place" Loadall allows for capacities of 6,000 pounds and a lift height of 36 feet. This model is ideal for masonry and framing applications and is a must for all rental fleets.

This easy to operate telescopic handler is equipped with low effort servo controls that are arranged in a pattern style that most operators are accustomed to. The 'low effort' doesn't just stop at operating the machine - with proven reliability and easy access to the side mounted engine for the daily checks, this machine is one of the easiest machines to maintain on the market today.

Lift Performance
Maximum Lift Capacity 6,000lb (2,722kg)
Maximum Lift Height 36' 4" (11m 07)
Engine
Maximum Engine Power 74hp (55kW)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics