Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Equipment Rental in Anza, California

When you need machinery and need it real quick to keep your construction project on track,you cannot of course buy heavy construction equipment outright. In such cases,it makes perfect sense to go with a construction equipment rental in Anza, California

Yes, you can have heavy construction equipment at your disposal,right from dozers and excavators to forklifts and everything else on a job-to-job basis.

There is no capital investment involved and it is possible to get started in as little as a day or two no matter where you are in California. We have a network of construction equipment vendors in Anza, California and that supply of the smallest and largest of construction equipment.

Getting started is easy. You can dial our toll free number right away and learn more about how this rental service works. You can also fill out the contact form and we will get back to you in no time.

Equipment Rental Anza, Construction equipment rental Anza, Construction rental Anza, Heavy Equipment Anza.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Trucks HM300-5
HM300-5 Articulated Truck

The 30.9 ton capacity HM300-5 is powered by a Tier 4 final Komatsu engine. A Komatsu Traction Control System along with two working modes and a standard payload meter (PLM) provide the operator with the tools needed to complete the job efficiently and profitably even in the most severe underfoot conditions. A heated, center located air suspension operator seat, a forward facing training seat, separate rear view monitor, and large LED multi-language monitor ensure the operator is working productively in comfort throughout a full shift.

Engine
Model Komatsu SAA6D125E-6*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 125 mm 4.92"
Stroke 150 mm 5.91"
Piston displacement 11.0 ltr 671 in3
Horsepower :
SAE J1995 248 kW 332 HP
ISO 9249 / SAE J1349 242 kW 324 HP
Rated rpm 2000 rpm
Fan drive type Hydraulic driven
Maximum torque 171 kg-m 1,237 ft lbs
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner, plus dust indicator
*EPA Tier 4 Final emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 58.6 km/h 36.4 mph
Axles
Full time all wheel drive with Komatsu Traction Control System (K-TCS)
Final drive type Planetary gear
Ratios:
Differential 3.154
Planetary 4.667
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Standard ISO5010, SAE J1511
Minimum turning radius, wall to wall 8.10 m 26'7"
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 13.4 m3 17.5 yd3
Heaped (2:1, SAE) 17.1 m3 22.4 yd3
Payload 28.0 metric tons 30.9 U.S. tons
Material - high tensile strength steel 130 kg/mm2 184,925 psi
Material thickness:
Bottom 14 mm 0.55"
Front 8 mm 0.31"
Sides 12 mm 0.47"
Target area - (inside length x width) 5250 mm x 2685 mm 17'3" x 8'10"
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 300 kg/cm2 / 29.4 Mpa 4264 psi
Hoist time 10.5 sec
Weight (approximate)
Empty weight 25,395 kg 55,986 lbs
Gross vehicle weight 53,475 kg 117,892 lbs
Weight distribution:
Empty:
Front axle 58.9%
Center axle 22.5%
Rear axles 18.6%
Loaded:
Front axle 30.8%
Center axle 36.0%
Rear axles 33.2%
Tires
Standard tire 23.5 R25
Service Refill Capacities
Fuel tank 388 ltr 102.5 U.S. gal
DEF tank 32.8 ltr 8.7 U.S. gal
Engine oil 35 ltr 9.2 U.S. gal
Torque converter, transmission and retarder cooling 80 ltr 21.1 U.S. gal
Differentials (total) 71.5 ltr 18.9 U.S. gal
Final drives (total) 23 ltr 6.1 U.S. gal
Hydraulic system 103 ltr 27.2 U.S. gal
Suspension (total) 10.4 ltr 2.7 U.S. gal

Hiring a Backhoe for your construction or transportation business cannot be a spur of the moment decision since the market is flooded with different makes and models. Backhoes come with different features and different brands use different technologies; the end user may or may not always be familiar with the pros and cons of numerous designs, technologies and features.

Don't fret if your ignorance is mounting the pressure on business performance.

HeavyRentals.Equipment can help you find reliable Backhoe rentals in Slocum. Our nationwide network of Backhoe companies across more than 5,000 locations all across the United States; we can come to your rescue, whether you need to rent Backhoe for a day, week, or months together.

When you hire from us, you needn't worry about the quality and efficiency of the equipment. We offer you access to a massive inventory of ready to be hired Backhoes in Slocum. We have on board vendors having Backhoes of all top brands; we have tied up with a large number of reliable Backhoe rental dealers in Slocum region already. So, you don't have to spend time researching, screening and interviewing vendors.

Before recommending a Backhoe rental company in Slocum, our team will personally assess your business needs and requirements. These requirements will be broken down into weight capacity, lift height, surface available for movement of the Backhoe, turning radius required, and of course your budget. You can narrate your requirements to our support team by dialing our helpline number, and also get free Backhoe rental estimates.

While we are here to make suitable suggestions, we let our clients have full control over their choices in renting Backhoes. When you rent with us be sure the Backhoe have been inspected to US safety standards.

Komatsu Trucks 730E-8

730E-8 Electric Drive Truck

The 203 ton capacity 730E-8 is a very versatile electric drive truck that features 1,860 flywheel horsepower. The cab has an integral ROPS, air ride seat, dynamic retarding and power steering with auto emergency steering to make the operator comfortable and more productive. To make the 730E more productive, a trolley assist option is available for circumstances where an overhead electrified trolley system can be used.

Engine
Make and model* Komatsu SSDA16V159
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
Gross horsepower** @ 1900 rpm 2,000 HP 1492 kW
Net flywheel power*** @ 1900 rpm 1,884 HP 1405 kW
* Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America.
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC current
Alternator GTA-49
Dual impeller in-line blower 13,900 cfm 393 m³/min
Control AC Torque Control System
Motorized wheels* GEB35 Induction Traction Motors
Ratio 30.8:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, tires
Standard tire* 37.00 R57
Flange mount rim 686 mm x 1448 mm x 152 mm 27'' x 57'' x 6'' rim assembly. Rims rated at 758 kPa 110 psi cold inflation pressure.
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Eyebrow, rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet - Outer (1379 MPa 200,000 psi tensile strength steel) 0.63'' 16 mm
Floor sheet - Center (1379 MPa 200,000 psi tensile strength steel) 0.75'' 19 mm
Front sheet (1379 MPa 200,000 psi tensile strength steel) 0.39'' 10 mm
Side sheet (1379 MPa 200,000 psi tensile strength steel) 0.31'' 8 mm
Canopy sheet (690 MPa 100,000 psi tensile strength steel) 0.24'' 6 mm
Capacity struck 153 yd³ 117 m³
SAE heaped 2:1 193 yd³ 148 m³
Standard Komatsu body weight 62,100 lb 28169 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab, adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material 70,000 psi 482.6 mPa tensile strength steel
Casting material 90,000 psi 620.5 mPa tensile strength steel
Rail width 11.02'' 280 mm
Rail depth (minimum) 31.38'' 797 mm
Top and bottom plate thickness 1.26'' 32 mm
Side plate thickness 0.75'' 19 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
System meets ISO 3450/1996.
Service brakes: all-hydraulic actuated.
Front: Wheel speed disc. Three calipers on a 1213 mm / 47.75" O.D. disc
Rear Dual disc armature speed. Two 635 mm / 25" O.D. discs per side. One caliper per disc.
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch-activated
Parking brakes Spring-applied, hydraulically released, with speed application protection.
Electric dynamic retarder (max.) 3,200 hp / 2387 kW Continuously rated high-density blown grids w/retard at engine idle and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.28'' 312 mm
Max. rear stroke 10.98'' 279 mm
Max. rear axle oscillation ±5.3°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank
Radiator frontal area 50.1 ft² 4.65 m²
Service Capacities
Cooling system 117 U.S. gal 441 L
Crankcase* 59 U.S. gal 223 L
Hydraulic system 210 U.S. gal 795 L
Motor gear box (each) 10 U.S. gal 38 L
Fuel 800 U.S. gal 3028 L
*Includes lube oil filters
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 89' 27.2 m
Reservoir 135 U.S. gal 511 L
Filtration In-line replaceable elements
Suction Single, full-flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 19 sec
Power-down 10.5 sec
Float--down empty 12 sec
Pumps: Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 666 lpm 176 gpm at 1900 rpm and 18961 kPa 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 254 lpm 67 gpm at 1900 rpm and 19134 kPa 2,775 psi
System relief pressures:
Hoist 2,500 psi 17237 kPa
Steering and brake 4,000 psi 27580 kPa
Electric System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24-volt 250 amp
Lighting 24 volt
Cranking motors Two/24 volt

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics