Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Equipment Rental in Floriston, California

When you need machinery and need it real quick to keep your construction project on track,you cannot of course buy heavy construction equipment outright. In such cases,it makes perfect sense to go with a construction equipment rental in Floriston, California

Yes, you can have heavy construction equipment at your disposal,right from dozers and excavators to forklifts and everything else on a job-to-job basis.

There is no capital investment involved and it is possible to get started in as little as a day or two no matter where you are in California. We have a network of construction equipment vendors in Floriston, California and that supply of the smallest and largest of construction equipment.

Getting started is easy. You can dial our toll free number right away and learn more about how this rental service works. You can also fill out the contact form and we will get back to you in no time.

Equipment Rental Floriston, Construction equipment rental Floriston, Construction rental Floriston, Heavy Equipment Floriston.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

Komatsu Excavators PC650LC-8 MH
PC650LC-8 MH Material Handler (55'-60' Reach)

If your needs require long reach and high stability in an excavator to handle material with grapples, clams or magnets, the PC650LC-8 material handler has the boom and arm combinations you'll need.

Engine
Model Komatsu SAA6D140E-5*
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 (Gross) 433 HP 323 kW
ISO9249 / SAE J1349 (Net) 429 HP 320 kW
Hydraulic fan at maximum speed (Net) 386 HP 288 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
*EPA Tier 3 and EU stage 3A emissions certified
Hydraulics
Type Open-center load-sensing system
Number of selectable working modes 3
Main pump:
Type Variable capacity piston pump
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 2 x 108 U.S. gpm 2 x 410 ltr/min
Sub-pump for control circuit Gear pump
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 2 x axial piston motor with swing holding brake
Fan drive pump Variable capacity
Relief valve setting:
Implement circuits 4,620 psi 31.9 MPa 325 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 3,700 psi 25.5 MPa 260 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders: Bore x Stroke: Bore x Stroke:
Boom / 2 7.5" x 61.5" x 5.0" 190 mm x 1562 mm x 127 mm
Arm / 1 7.5" x 78.0" x 5.0" 190 mm x 1981 mm x 127 mm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 93,250 lb 415 kN / 42300 kg
Gradeability 70%
Maximum travel speed:
Low 1.9 mph 3.0 km/h
High 3.0 mph 4.9 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 8.3 rpm
Swing torque 154,481 ft. lbs. 21365 kg•m
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes (each side) 52
Number of carrier rollers (each side) 3
Number of track rollers (each side) 9
Coolant and Lubricant Capacity (refilling)
Fuel tank 232.5 U.S. gal 880 ltr
Radiator 15.3 U.S. gal 58 ltr
Engine 10.6 U.S. gal 40 ltr
Final drive, each side 2.6 U.S. gal 10 ltr
Swing drive 2 x 3.4 U.S. gal 2 x 13 ltr
Hydraulic tank 95.0 U.S. gal 360 ltr
Operating Weight (approximate)
Operating weight without grapple
16.8 m / 55'
3302 mm / 130" gauge 139,424 lb 63242 kg
4064 mm / 160" gauge 149,224 lb 67687 kg
18.3 m 60'
3302 mm / 130" gauge 140,838 lb 63883 kg
4064 mm / 160" gauge 150,638 lb 68329 kg

John Deere Backhoe Loader 332E
A shining example of customer input.

The 332E was shaped by customers like you. They wanted more foot room, so we designed a flat floor with 25-percent more of it. They asked for easy hydraulic attachment, so we added connect-under-pressure auxiliary couplers. They liked our engine side shields but thought they could install more securely. We agreed and improved the design. They asked for automotive-style courtesy lighting, so now lights can be preset to stay on for up to a 90-second interval before shutting down after the operator exits the machine. Then there are a host of new options, such as available electrohydraulic (EH) controls you can switch to ISO, H-pattern, or foot pedal controls for operation with the push of a button. Plus, the 332E boasts more power while maintaining our patented vertical-lift boom for exceptional lift height and reach. And its EPA Interim Tier 4 engine features automatic cleaning without impacting machine operation in most conditions.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model Yanmar / 4TNV94CHT
Net Power, kW (hp) @ Rated rpm 72 (97) @ 2500
Gross power, kW (hp) 74.6 (100)
Net peak torque, N-m (lb-ft) 395 (291)
Displacement, L (cu in) 3.1 (186.3)
Engine aspiration Turbo. Intercooled
Fuel capacity, L (gal) 96.5 (25.5)
HYDRAULIC sYSTEM
Standard pump flow, L/min (gpm) 95 (25)
Optional high flow, L/min (gpm) 144 (38)
System pressure, kPa (psi) 23787 (3450)
Hydraulic power, kW (hp) 37.29 (50)
Optional high flow hydraulic power, kW (hp) 56.52 (75.7)
PERFORMANCE
SAE rated operating capacity, kg (lb) 1453 (3200)
SAE ROC with optional counterweight, kg (lb) not published
Tipping Load, standard, kg (lb) 2906 (6400)
Breakout Force Boom, kN (lb) 29.3 (6600)
Breakout Force Bucket, kN (lb) 61.7 (13875)
Vertical lift geometry Vertical

 

dRIVE tRAIN
Maximum Ground Speed, standard, kph (mph) 19.3 (12)
Two Speed Transmission Ground Speed, kph (mph) not published
Drive Chain Rating 100
Axle Torque, Nm (lb-ft) 9289 (6830)
Tire size - Standard 14 x 17.5
DIMENSIONS
Length with Bucket, mm (in) 3660 (144)
Length without Bucket, mm (in) 3050 (120)
Width without Bucket, mm (in) 1990 (78.4)
Height to ROPS, mm (in) 2150 (84.7)
Height to Hinge Pin, mm (in) 3230 (127)
Dump Height, mm (in) 2590 (102)
Dump Reach, mm (in) 800 (31.6)
Dump Angle, degrees 45
Bucket Rollback @ ground, degrees 35
Wheelbase, mm (in) 1230 (48.3)
Ground Clearance, mm (in) 280 (10.8)
Angle of Departure, degrees 29
wEIGHT
SAE Operating weight, kg (lb) 4363 (9610)

JCB Teletruks TLT 35D
TLT 35D
The TLT35D 2wd and 35D 4x4 counterbalance forklifts are strong and exceptionally versatile performers, weighing up to 12,125lb.

Maximum lift capacity is 7,000lb with maximum lift height of 14ft,5 inches and a maximum forward reach of 8ft.

The JCB 35D Teletruk is powered by the new Tier 4/Stage IIIB JCB Diesel by Kohler 62HP engine.

Our unique telescopic boom offers many benefits which are:

Unrivalled visibility - No obstructive mast improving site safety.

Forward reach - Ability to single side load, reduces double-handling and keeps operators clear of hazardous environments.

111 degrees of carriage rotation - Making handling of unpalletised goods much easier and safer.

Space savings - 50% less loading space required in congested yards.

Lift Performance
Maximum Lift Capacity 7000lb
Capacity at 6ft 6in reach 3750lb
Maximum Lift Height 14' 5"

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics