Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Equipment Rental in Landers, California

When you need machinery and need it real quick to keep your construction project on track,you cannot of course buy heavy construction equipment outright. In such cases,it makes perfect sense to go with a construction equipment rental in Landers, California

Yes, you can have heavy construction equipment at your disposal,right from dozers and excavators to forklifts and everything else on a job-to-job basis.

There is no capital investment involved and it is possible to get started in as little as a day or two no matter where you are in California. We have a network of construction equipment vendors in Landers, California and that supply of the smallest and largest of construction equipment.

Getting started is easy. You can dial our toll free number right away and learn more about how this rental service works. You can also fill out the contact form and we will get back to you in no time.

Equipment Rental Landers, Construction equipment rental Landers, Construction rental Landers, Heavy Equipment Landers.

Unable to parse entered address. API response code: REQUEST_DENIED

John Deere Backhoe Loader 310K Interim Tier 4
Shift productivity into a higher gear.

The new 310K Backhoe is all about delivering what you want. The EPA IT4/EU Stage IIIB technology is simple, fuel efficient, fully integrated, and fully supported. Choose from pilot, two-lever, three-lever, four-lever, or SAE excavator-style controls. Smooth response and low effort are yours regardless of which you select. It also boasts enhancements such as a more efficient HVAC system and machine-security system. Redesigned easier-to-clean cooling package. Quarter cab option for easy jobsite communication. Plus, our 310K backhoe Loader comes standard with JDLinkTM and Service ADVISORTM Remote to keep your machines productive.

From the increased hood tilt that allows even easier engine access, to the tilt-out coolers that open up the cores - the 310K Backhoe is loaded with features that make it as easy to maintain as it is to operate. Same-side ground-level service points help daily checks and additions go more quickly. Other commonsense features such as quick-change filters, extended service intervals, simple-to-read sight gauges, and easy-access grease zerks help increase uptime and lower daily operating costs. And because no maintenance beats low maintenance, self-adjusting serpentine belts, park brakes, and wet-disc brakes seldom, if ever, require attention. Altogether, the 310K gives you the machine you asked for.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech E 4045HT073
Net Power, kW (hp) @ Rated rpm 66 (88) @ 2000
Displacement, L (cu in.) 4.5 (275)
electrical
Voltage 12
Alternator amps 90
transmission
Type Powershift
Max. Travel Speed - fwd, kph (mph) 33.1 (20.6)
Max. Travel Speed - rev, kph (mph) 12.9 (8)
Brakes
Type Wet Multi Disc
Actuation Hydraulic w/Power Assist
hydraulic system
Pump Type Gear Type Pump
Pump Flow, L/min (gpm) 106 (28)
System Pressure, kPa (psi) 24993 (3625)
Backhoe, Fixed length dipperstick
Max. Digging Depth, mm (ft in) 5460 (17 ft 11 in)
2ft (0.61m) Flat Bottom, mm (ft in) 4320 (14 ft 2 in)
Reach from Swing Center, mm (ft in) 5440 (17 ft 10 in)
Truck Loading Height, mm (ft in) 3330 (10 ft 11 in)
Digging Force Crowd, kN (lb) 31.2 (7006)
Bucket, Power Dig, kN (lb) 49.4 (11106)
deere lift capacities are according to sae j31
Max. Digging Depth, mm (ft in) 5460 (17 ft 11 in)
2ft (0.61m) Flat Bottom, mm (ft in) 4320 (14 ft 2 in)
Reach from Swing Center, mm (ft in) 5440 (17 ft 10 in)
Truck Loading Height, mm (ft in) 3330 (10 ft 11 in)
Digging Force Crowd, kN (lb) 31.2 (7006)
Bucket, Power Dig, kN (lb) 49.4 (11106)
Deere figures listed are 87% of the max lift force available
Boom Lift Cap. @ Ground Level, kg (lb) 1154 (2545)
Dipperstick Lift Capacity @ 12' Height, kg (lb) 2204 (4859)
backhoe, standard bucket
SAE Heaped Capacity, cu m (cu ft) 0.18 (6.5)
Backhoe Bucket Width, mm (in) 305 (12)
Bucket Rotation, deg 190
Loader
SAE Heaped Capacity, cu m (cu yd) 0.77 (1)
Loader Bucket Width, mm (in) 2184 (7 ft 2 in)
Breakout force, kN (lb) 41.6 (9350)
Lift Capacity to Full Height, kg (lb) 2996 (6600)
Dump Clearance @ 45 deg, mm (ft in) 2690 (8 ft 10 in)
Dump Reach, mm (in) 785 (30.9)
Bucket Hinge Pin Max. Height, mm (ft in) 3380 (11 ft 1 in)
Coupler (Mechanical, Hydraulic) Option
Two wheel drive
Wheelbase, mm (in) 2110 (6 ft 11 in)
Curb Turning Radius w/out Brakes, mm (ft in) 3940 (12 ft 11 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3440 (11 ft 3 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5380 (17 ft 8 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 4945 (16 ft 3 in)
Four WHEEL DRIVE
Wheelbase, mm (in) 2140 (7 ft )
Curb Turning Radius w/out Brakes, mm (ft in) 4080 (13 ft 5 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3580 (11 ft 9 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5525 (18 ft 2 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 5055 (16 ft 7 in)
dimensions
Transport Height, mm (ft in) 3430 (11 ft 3 in)
Transport Length, mm (ft in) 7090 (23 ft 3 in)
Transport Width, mm (ft in) 2180 (7 ft 2 in)
Width Over Tires, mm (in) 2180 (7 ft 2 in)
capacities
Fuel Tank, L (gal) 155.2 (41)
Hydraulic Reservoir, L (gal) 37.1 (9.8)
weight 2wd, rops
SAE Operating Weight, kg (lb) 6195 (13657.6)
Metric Ton Weight, kg (lb) 6.195 (13.658)
WEIGHT 4WD, cab, ext.hoe
SAE Operating Weight, kg (lb) 6563 (14468.9)
Metric Ton Weight, kg (lb) 6.563 (14.469)

Komatsu  Motor Grader Grader GD655-5
GD655-5
The GD655-5 has a unique dual mode automatic transmission. The operator can operate in direct drive mode for long pushes such as snow removal without ever having to declutch like all other graders. In the torque converter mode the operator has excellent low speed maneuverability and hydraulic control again, without having to declutch to prevent stalling the machine. Excavator style hydraulics, 900 left or right bank slope, two working modes and variable horsepower give the operator the tools he needs to do any job with precision and power.

Engine
Model Komatsu SAA6D107E-1*
Type Water-cooled,4-cycle,direct injection
Aspiration Turbocharged and air-to-air aftercooled
Number of cylinders 6
Bore 4.21" 107 mm
Stroke 4.88" 124 mm
Piston displacement 408 in3 6.69 ltr
Gross horsepower (Manual mode):
P-mode
Gear 1-3 @2000 rpm 183 HP 136 kW
Gear 4-6 @2000 rpm 203 HP 151 kW
Gear 7-8 @2100 rpm 221 HP 165 kW
E-mode
Gear 1-3 @2000 rpm 148 HP 110 kW
Gear 4-6 @2000 rpm 183 HP 136 kW
Gear 7-8 @2000 rpm 203 HP 151 kW
Net flywheel horsepower** (Manual mode):
P-mode
Gear 1-3 @2000 rpm 180 HP 134 kW
Gear 4-6 @2000 rpm 200 HP 149 kW
Gear 7-8 @2100 rpm 218 HP 163 kW
E-mode
Gear 1-3 @2000 rpm 145 HP 108 kW
Gear 4-6 @2000 rpm 180 HP 134 kW
Gear 7-8 @2000 rpm 200 HP 149 kW
Max. torque @1450 rpm 694 lb.ft. 941 Nm 96.0 kg•m
Torque rise 31 %
Fan speed Max. 1500 rpm
Air cleaner 2-stage, dry-type
Electrical 24 Volt with 90 Amp alternator
Battery 2, low maintenance plus, 12 Volt, 1146 CCA
* EPA Tier 3 and EU Stage 3A emissions certified
** Net flywheel HP output for standard SAE J1349 including air cleaner, alternator (not charging), water pump, lubricating oil, fuel pump, muffler and fan running at minimum speed.
Transmissions and Torque Converter
Full power shift transmission with integral free-wheeling stator torque converter and lockup.
Speeds (at rated engine speed)
Gear Forward Reverse
1st 2.1 mph 3.4 km/h 2.8 mph 4.5 km/h
2nd 3.1 mph 5.0 km/h 5.7 mph 9.2 km/h
3rd 4.3 mph 7.0 km/h 12.6 mph 20.3 km/h
4th 6.3 mph 10.2 km/h 25.0 mph 40.3 km/h
5th 9.6 mph 15.4 km/h -
6th 13.9 mph 22.3 km -
7th 19.0 mph 30.6 km/h -
8th 27.5 mph 44.3 km/h -
Front Axel
Type Solid bar construction welded steel sections
Ground clearance at pivot 2'0" 620 mm
Wheel lean angle, right or left 16°
Oscillation, total 32°
Rear Axle
Alloy steel, heat treated, full floating axle with lock/unlock differential
Tandem Drive
Oscillating welded box section 1'8" x 8" 520 mm x 202 mm
Side wall thickness:
Inner 0.87" 22 mm
Outer 0.75" 19 mm
Wheel axle spacing 5'0" 1525 mm
Tandem oscillation 11° forward, 13° reverse
Wheels, Front and Rear
Bearings Tapered roller
Tires 17.5R25
Tire rims (demountable) 13" one-piece rims
Steering
Hydraulic power steering providing stopped engine steering meeting SAE J53 and J1151.
Minimum turning radius 24'3" 7.4 m
Maximum steering range, right or left 49°
Articulation, right or left 25°
Brakes
Service brake Foot operated, sealed wet disc brakes, hydraulically actuated on four tandem wheels, 13691 cm2 / 2,122 in2 total braking surface
Parking brake Manually actuated, spring applied, hydraulically released caliper with transmission interlock
Frame
Front Frame Structure
Height 11.8" 300 mm
Width 11.8" 300 mm
Drawbar
A-shaped, U-section press formed and welded construction for maximum strength with a replaceable drawbar ball.
Drawbar frame 8.3" x 1" 210 x 25 mm
Circle
Single-piece rolled ring forging. Six circle support shoes with replaceable wear surface. Circle teeth hardened on front 180¢ª of circle.
Diameter (outside) 5'0" 1530 mm
Circle reversing control hydraulic rotation 360°
Moldboard
Hydraulic power shift fabricated from high carbon steel. Includes replaceable metal wear inserts, cutting edge and end bits. Cutting edge and end bits are hardened.
Dimensions 14' x 26" x 0.87" 4320 x 660 x 22 mm
Arc radius 1'1" 329 mm
Cutting edge 6" x 0.63" 152 x 16 mm
Blade Range
Circle center shift:
Right 1'11" 590 mm
Left 1'11" 590 mm
Moldboard side shift:
Right 2'8" 820 mm
Left 2'8" 820 mm
Maximum shoulder reach outside rear tires (frame straight)
Right 6'4" 1940 mm
Left 6'4" 1940 mm
Maximum lift above ground 1'7" 480 mm
Maximum cutting depth 2'0" 615 mm
Maximum blade angle, right or left 90°
Blade tip angle 40° forward 5° backward
Hydraulic System
Load-sensing closed center hydraulics with variable displacement piston pump. Short stroke/low effort direct acting control valves with preselected maximum flow setting to each function. Double acting anti-drift check valves on blade lift, tip, circle shift, articulation, and leaning wheels.
Output @ 2000 rpm 52.8 u.s.gal/min 200 ltr/min
Standby pressure 500 psi 3.4 MPa 35 kg/cm2
Maximum system pressure 3,000 psi 20.6 MPa 210 kg/cm2
Instrumentation
Electric monitoring system with diagnostics:
Gauges - Standard: articulation, engine coolant temperature, fuel level, speedometer, T/M shift indicator, engine tachometer torque converter oil temperature
Warning lights / Indicator - Standard: battery charge, brake oil pressure, blade float, brake oil pressure, inching temperature, directional indicator, engine oil pressure, hydraulic oil temperature, heater signal, lift arm lock, parking brake, differential lock, torque converter oil temperature, eco, P mode, fan reverse, rpm set, high beam, working lights
Optiona3 blade accumulator
Service Refill Capacities
Fuel tank 109.9 u.s. gal 416 ltr
Cooling system 6.6 u.s. gal 24.9 ltr
Crank case 6.1 u.s. gal 23.1 ltr
Transmission 11.9 u.s. gal 45 ltr
Final drive 4.5 u.s. gal 17 ltr
Tandem housing (each) 15.1 u.s. gal 57 lt
Hydraulic system 18.2 u.s. gal 69 ltr
Circle reverse housing 1.8 u.s. gal 7 ltr
Operating Weight (approximate)
Standard configuration without pushplate
Total 35,351 lb 16035 kg
On rear wheels 25,534 lb 11582 kg
On front wheels 9,817 lb 4453 kg
With rear mounted ripper and front push plate:
Total 39,505 lb 17916 kg
On rear wheels 27,944 lb 12673 kg
On front wheels 11,561 lb 5243 kg
With mid-mounted scarifier, without front pushplate:
Total 36,665 lb 16631 kg
On rear wheels 25,708 lb 11661 kg
On front wheels 10,957 lb 4970 kg
• Front pushplate weight 1075 kg 2,371 lb
• Operating weight based on the standard machine configuration with 17.5R25 tires, 14' moldboard, full fuel tank, coolant, lubricants, and operator

John Deere Backhoe Loader 310SK Interim Tier 4
Get maximum versatility, end to end.

Want to get the most from your backhoe? Choose a 310SK Tool Carrier (TC). Your operators will enjoy responsive near-effortless backhoe control and parallel lift that's simply unparalleled. One-of-a-kind electrohydraulic (EH) design delivers unsurpassed capability. With true parallel-lift throughout the lift arc, it gives you the finesse to handle everything from pipe to pallets. And unlike mechanical loader linkages, our exclusive EH-controlled loader employs fewer parts, so you'll spend less time on maintenance. The electrohydraulic joysticks mounted in the armrests make it easy to move from loader to backhoe and back again. They also provide smooth, single-lever control of auxiliary loader attachments, extendable dipperstick, backhoe auxiliary attachments, hammer, mechanical front-wheel drive and horn - all operating with the seat turned 90 degrees. You won't have to worry about replacing current attachments, either. The standard quick-coupler lets you hook up to a variety of older John Deere and other brands of loader attachments.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech E 4045HT073
Net Power, kW (hp) @ Rated rpm 72 (96) @ 2000
Displacement, L (cu in.) 4.5 (276)
electrical
Voltage 12
Alternator amps 90
transmission
Type Powershift
Max. Travel Speed - fwd, kph (mph) 40 (24.8)
Max. Travel Speed - rev, kph (mph) 20.6 (12.8)
Brakes
Type Wet Multi Disc
Actuation Hydraulic w/Power Assist
hydraulic system
Pump Type Tandem Gear Pump
Pump Flow, L/min (gpm) 106 (28)
System Pressure, kPa (psi) 24993 (3625)
Backhoe, Fixed length dipperstick
Max. Digging Depth, mm (ft in) 5610 (18 ft 5 in)
2ft (0.61m) Flat Bottom, mm (ft in) 4370 (14 ft 4 in)
Reach from Swing Center, mm (ft in) 5560 (18 ft 3 in)
Truck Loading Height, mm (ft in) 3430 (11 ft 3 in)
Digging Force Crowd, kN (lb) 36 (8090)
Bucket, Power Dig, kN (lb) 53.3 (11990)
deere lift capacities are according to sae j31
Max. Digging Depth, mm (ft in) 5610 (18 ft 5 in)
2ft (0.61m) Flat Bottom, mm (ft in) 4370 (14 ft 4 in)
Reach from Swing Center, mm (ft in) 5560 (18 ft 3 in)
Truck Loading Height, mm (ft in) 3430 (11 ft 3 in)
Digging Force Crowd, kN (lb) 36 (8090)
Bucket, Power Dig, kN (lb) 53.3 (11990)
Deere figures listed are 87% of the max lift force available
Boom Lift Cap. @ Ground Level, kg (lb) 1381 (3045)
Dipperstick Lift Capacity @ 12' Height, kg (lb) 2533 (5585)
backhoe, standard bucket
SAE Heaped Capacity, cu m (cu ft) 0.18 (6.5)
Backhoe Bucket Width, mm (in) 305 (12)
Bucket Rotation, deg 190
Loader
SAE Heaped Capacity, cu m (cu yd) 0.86 (1.125)
Loader Bucket Width, mm (in) 2184 (7 ft 2 in)
Breakout force, kN (lb) 49.2 (11051)
Lift Capacity to Full Height, kg (lb) not published
Dump Clearance @ 45 deg, mm (ft in) 2690 (8 ft 10 in)
Dump Reach, mm (in) 785 (30.9)
Bucket Hinge Pin Max. Height, mm (ft in) 3400 (11 ft 2 in)
Coupler (Mechanical, Hydraulic) Option
Two wheel drive
Wheelbase, mm (in) 2110 (6 ft 11 in)
Curb Turning Radius w/out Brakes, mm (ft in) 3940 (12 ft 11 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3440 (11 ft 3 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5380 (17 ft 8 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 4945 (16 ft 3 in)
Four WHEEL DRIVE
Wheelbase, mm (in) 2140 (7 ft )
Curb Turning Radius w/out Brakes, mm (ft in) 4080 (13 ft 5 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3580 (11 ft 9 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5525 (18 ft 2 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 5055 (16 ft 7 in)
dimensions
Transport Height, mm (ft in) 3430 (11 ft 3 in)
Transport Length, mm (ft in) 7160 (23 ft 6 in)
Transport Width, mm (ft in) 2180 (7 ft 2 in)
Width Over Tires, mm (in) 2180 (7 ft 2 in)
capacities
Fuel Tank, L (gal) 155.2 (41)
Hydraulic Reservoir, L (gal) 37.1 (9.8)
weight 2wd, rops
SAE Operating Weight, kg (lb) 6670 (14708)
Metric Ton Weight, kg (lb) 6.67 (14.708)
WEIGHT 4WD, cab, ext.hoe
SAE Operating Weight, kg (lb) 7112 (15683)
Metric Ton Weight, kg (lb) 7.112 (15.683)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics