Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Equipment Rental in Upper Lake, California

When you need machinery and need it real quick to keep your construction project on track,you cannot of course buy heavy construction equipment outright. In such cases,it makes perfect sense to go with a construction equipment rental in Upper Lake, California

Yes, you can have heavy construction equipment at your disposal,right from dozers and excavators to forklifts and everything else on a job-to-job basis.

There is no capital investment involved and it is possible to get started in as little as a day or two no matter where you are in California. We have a network of construction equipment vendors in Upper Lake, California and that supply of the smallest and largest of construction equipment.

Getting started is easy. You can dial our toll free number right away and learn more about how this rental service works. You can also fill out the contact form and we will get back to you in no time.

Equipment Rental Upper Lake, Construction equipment rental Upper Lake, Construction rental Upper Lake, Heavy Equipment Upper Lake.

Unable to parse entered address. API response code: REQUEST_DENIED

SkyTrak Telehandlers 10054

JLG SkyTrak Telehandlers 10054
Key Specs

  • Maximum Lift Capacity: 10000 lb / 4535.92
  • Outriggers Up Max Lift Height: 41 ft 6 in. / 12.65 m
  • Maximum Reach: 38 ft 9 in. / 11.81 m
  • Maximum Lift Height: 53 ft 2 in. / 16.21 m

Key Features

  • Sealed bearings extend service intervals for lower maintenance costs
  • Exclusive interlock system keeps outriggers set for full boom extension
  • Stabil-Trak stability system for increased operator confidence
Performance
Breakout Force 24500 lb / 11113.01 kg
Drawbar Pull 24000 lb / 10886.22 kg
Frame Leveling 10 Degrees
Outriggers Up Lift Capacity Full Height 4000 lb / 1814.37 kg
Outriggers Up Lift Capacity Full Reach 1400 lb / 635.03 kg
Load Center 2 ft / 0.61 m
Maximum Lift Capacity 10000 lb / 4535.92 kg
Outriggers Up Max Lift Height 41 ft 6 in. / 12.65 m
Outriggers Up Max Forward Reach 26 ft 6 in. / 8.08 m
Lift Capacity at Full Height 4000 lb / 1814.37 kg
Lift Capacity at Max Reach 3000 lb / 1360.78 kg
Maximum Reach 38 ft 9 in. / 11.81 m
Maximum Lift Height 53 ft 2 in. / 16.21 m
Outriggers or Stabilizers Yes
Outside Turning Radius 13 ft 9 in. / 4.19 m
Speed - Maximum Lift 18 sec.
Speed - Maximum Lower 16 sec.
Speed - Maximum Telescope In 17 sec.
Speed - Maximum Telescope Out 19 sec.
Speed - Maximum Travel 21 mph / 32.99 km/h
Dimensional Data
Ground Clearance 1 ft 6 in. / 0.46 m
Machine Height 8 ft 4 in. / 2.54 m
Machine Length 19 ft 11 in. / 6.06 m
Machine Width 8 ft 6 in. / 2.59 m
Tire Size 400/75-28
Track Width 7 ft / 2.14 m
Wheelbase 10 ft / 3.04 m
Power Source
Capacity - Fuel Tank 35 gal. / 132.49 L
Engine Horsepower 100 hp / 74.60 kW
Engine Manufacturer Cummins
Engine Model QSB3.3L
Maximum Engine RPM 2600 rpm
General
Axle-Front High Bias, Limited Slip
Axle-Rear Oscillating
Function Pump Type Load Sensing Piston
Hydraulic System Pressure 3100 psi / 217.10 Kg/cm2
Operating Vehicle Weight 27323 lb / 12393.50 kg
Service Brake Type Wet Multi-Disc
Transmission - Nr Forward Gears Standard 4
Transmission - Nr Reverse Gears 3
Transmission Type Powershift

JCB Compaction Equipment VM 132PD

VM 132PD

The JCB VM 132PD vibrating roller is a mid-size single drum soil compactor. It's nevertheless powerful and accurate, giving you quick, high quality results. It weighs 29,542lb (13,400 kg), has a drum width of 82.7in (2100mm) and is powered by a highly efficient JCB Dieselmax 4.4 liter 145hp (108kW) engine (TIER3).

The VM 132PD drum roller is built to perform, again and again and again. That means building it to last. It's an approach we've taken with all of our compaction rollers, with every sophisticated component built to perform and cost you less. Just take the single-piece eccentric shaft with overturning weights, which produces optimum performance and minimum maintenance.

In fact performance is so good that compaction is best in class on the JCB VM 132PD vibrating roller. No wonder when you consider that standard equipment includes an Automatic Vibration Control, superb front-rear weight distribution, a switchable anti-slip system (SASS) and heavy-duty no-spin axles.

COMPACTION PERFORMANCE
Operating Weight
39542lb (13400kg)
Centrifugal Force
68567 (305kN)
Engine
Maximum Engine Power 145hp (108kW)

Push Around Stock Pickers 12SP

JLG Push Around Stock Pickers 12SP
Key Specs

  • Machine Width: 2 ft 10 in. / 0.86 m
  • Platform Height:11 ft 9 in. / 3.58 m

Key Features

  • Flexible platform that folds up and down for efficient retrieval of materials
  • Zero turning radius for superior maneuverability
  • Long battery duty cycles for less downtime on the job
Dimensional Data
Ground Entry Height 1 ft 6 in. / 0.44 m
Machine Height 6 ft 6 in. / 1.98 m
Machine Length 6 ft 1 in. / 1.84 m
Machine Width 2 ft 10 in. / 0.86 m
Platform Dimension A 4 ft / 1.22 m
Platform Dimension B 2 ft 4 in. / 0.71 m
Platform Height 11 ft 9 in. / 3.58 m
Reach Specifications
Platform Height 11 ft 9 in. / 3.58 m
Working Height 18 ft / 5.49 m
Performance
Maximum Lift Height 12 ft / 3.60 m
Outriggers or Stabilizers No
Platform Capacity 500 lb / 226.80 kg
General
Machine Weight 1180 lb / 535.24 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics