Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Arlington, Colorado

Looking for a reliable construction equipment rental service in Arlington ? We can help!

We have the most reliable network of construction equipment suppliers in Arlington who offer all kinds of machines and tools on rent. Daily, weekly and monthly rentals are available and therefore, you don’t spend a penny extra on the service when you don’t need it.

Renting heavy machinery and tools through us means that you will have access to the newest and best in class equipment. Our vendors keep upgrading their inventories on a regular basis. In fact, vendors are added to the network only on the basis of the quality of machines and tools they have ready-for-rent.

Dial our toll free number today and speak to an expert! Alternatively, you can submit the short contact form on the right and we will get back to learn your heavy construction equipment requirements in Arlington.

Over the top personalized customer care guaranteed!

Equipment Rental Arlington, Construction equipment rental Arlington, Construction rental Arlington, Heavy Equipment Rental Arlington.

Komatsu Excavators PC800LC-8
PC800LC-8 Hydraulic Excavator

Got mass quantities of material to move or tough conglomerate to dig through? The PC800LC-8 Hydraulic Excavator could be the answer you're looking for. Economy or power working modes, smooth or power boom modes and a shockless boom mode give the operator the tools he needs to optimize the production of his machine. In a Super Digger configuration, with two arm cylinders, digging force is increased by 19%.

Engine
EPA Tier 3 and EU stage 3A emission certified.
Model Komatsu SAA6D140E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 (Gross) 496 HP 370 kW
ISO9249 / SAE J1349 (Net) 487 HP 363 kW
Hydraulic fan at maximum speed (Net) 454 HP 338 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Hydraulics System
Type EOLSS (Electronic Open-center Load Sensing System)
Number of selectable working modes 3
Main pump:
Type Two (2) variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow
Main 2 x 130.5 U.S. gpm 2 x 494 ltr/min
Fan drive pump Variable capacity piston type
Hydraulic motors:
Travel Two (2) axial piston motors with parking brake
Swing Two (2) axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 4,120 psi 28.4 MPa 290 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders: bore x stroke x rod diameter bore x stroke x rod diameter
Boom / 2 7.9" x 76.8" x 5.5" 200 mm x 1950 mm x 140 mm
Arm:
Standard / 1 7.9" x 88.6" x 5.5" 200 mm x 2250 mm x 140 mm
SE / 2 7.3" x 63.4" x 4.7" 185 mm x 1610 mm x 120 mm
Bucket :
Standard / 1 7.3" x 63.4" x 5.1" 185 mm x 1610 mm x 130 mm
SE / 1 8.9" x 55.9" x 6.3" 225 mm x 1420 mm x 160 mm
Swing System
Driven method Two (2) hydraulic motors
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 6.8 rpm
Swing torque 209,461 ft. lbs. 28968 kg•m
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 125,660 lb 559 kN 57000 kg
Gradeability 70%
Maximum travel speed:
High 2.6 mph 4.2 km/h
Low 1.7 mph 2.8 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Undercarriage
Center frame H-leg
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 51 each side
No. of carrier rollers 3 each side
No. of track rollers 9 each side
Service Refill Capacities
Fuel tank 258.9 U.S. gal 980 ltr
Radiator 26.4 U.S. gal 100 ltr
Engine 14 U.S. gal 53 ltr
Final drive, each side 5.3 U.S. gal 20 ltr
Swing drive 6.5 x 2 U.S. gal 24.5 x 2 ltr
Hydraulic tank 124.2 U.S. gal 470 ltr
Operating Weight (approximate)
Operating weight, including 8200 mm / 26'11" boom, 3600 mm / 11'10" arm, SAE heaped 3.1 m³ / 4.05 yd³ backhoe bucket, operator, lubricant, coolant, full fuel tank, and standard equipment.
Shoes Operating Weight Ground Pressure
32" / 810 mm Double grouser 185,585 lb 84180 kg 13.46 psi 0.95 kg/cm²
40" / 1010 mm Double grouser 188,670 lb 85579 kg 10.99 psi 0.77 kg/cm²

If you own a construction company, run a warehouse or have a goods transport business in Wadsworth, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.

But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.

But, finding reliable Excavator rentals in Wadsworth isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Wadsworth.

This is where HeavyRentals.Equipment can help.

Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Wadsworth as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Wadsworth against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.

As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Wadsworth you wish to choose.

Komatsu Excavators PC3000-6
PC3000-6 Mining Shovel

Loading 85 to 165 ton trucks using a backhoe or shovel productively requires speed, good dump height and reach, and power. The PC3000-6 Mining Shovel, whether in backhoe or shovel configurations, is the right fit for this loading class.

Diesel Drive
Model Komatsu SSA12V159
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged and intercooled
Number of cylinders 12
Rated power (SAE 1995/J1349) @ 1800 rpm 1,260 HP 940 kW
Governor All-speed, electronic
Optional engine oil management system: The integrated engine oil and filter system combining the oil stabilising systems, Reserve and Centinel, with the Eliminator self cleaning oil filter extends, with oil analysis, the oil change interval to 4000 hours.
Electrics
System 24 V
Batteries (series/parallel) 4 x 12 V
Alternator 150 A
Standard working lights 8 Xenon lights
Service lights 8 lights
Hydraulics
The power train consists of one main drive. Diesel engine or electric motor can be supplied. One gearbox drives three identical main pumps which draw hydraulic oil from an unpressurized hydraulic tank. Open circuit hydraulics provide maximum cooling and filtering efficiency.The three-circuit Hydropilot system features electronic engine and pump management to optimise hydraulic power for smooth hydraulic action, fast response, simple system layout and a reduced number of components. Filtration is at the oil intake to pumps, valve blocks, heat exchangers and oil tank.
Main hydraulic pumps 3x240 U.S. gal 3x910 ltr/min
Relief valve setting 4,495 psi 310 bar
Swing flow rate 211 U.S. gal/min 800 ltr/min
High pressure in line filters one per pump located at the valve blocks 200 microns
Full flow return line filters 3 x 10 microns and leakage line filter 3 microns all with monitored by pass filters 200 microns. at head of tank
Drives and Brakes
Travel control 2 foot pedals
Gradeability Up to 57%
Travel speed (maximum) 1.5 mph 2.4 km/h
Service brake Hydraulic
Parking brake Wet, multiple-disc
Swing System
Hydraulic motors and drives 1
Swing brake, service Hydraulic
Swing brake, parking Wet, multiple disc
Swing ring teeth External
Swing speed (maximum) 4.6 rpm
Cooling System
The high capacity engine radiator is cooled by a mechanically driven fan for superior cooling efficiency and requires little maintenance. The hydraulic system includes two large swing-out vertical air-to-oil hydraulic coolers with temperature-regulated hydraulically driven fan.
Electric Drive
Type Squirrel-cage induction motor
Power output 900 kW
Voltage 6600 V*
Amperage (approximate) 96 A
Frequency (standard) @ 1500 rpm 50 Hz
Optional frequency @ 1800 rpm 60 Hz
*Other voltages available on request.
Undercarriage
The undercarriage consists of one center carbody and two track frames, each side attached by 38 high torque bolts.
Center frame H-type
Track frame Steel box-section
Track adjustment Automatic hydraulic type
Number of shoes 46 each side
Number of top rollers 3 each side
Number of bottom rollers 7 each side
Automatic Centralized Lubrication
Two hydraulically powered Lincoln single line automatic lubrication systems are provided as standard, complete with time and volume variable controls. Activity and malfunction events are linked to the ETM. The central lube grease system is supplied from a refillable 200 liter 53 gal. barrel. A second, identical system supplies open gear lubricant to the swing ring teeth through a lube pinion. Replenishment of the barrels is through the service center.
Service Refill Capacities
Hydraulic oil tank 765 U.S. gal 2900 ltr
Hydraulic system 1,160 U.S. gal 4400 ltr
Fuel 1,190 U.S. gal 4500 ltr
Engine coolant 95 U.S. gal 360 ltr
Engine oil 50 U.S. gal 190 ltr
Cab
The large welded steel cab incorporating the ISO 3449 FOPS Level 2 structure is vibration isolated with 15 viscous combination pads and sound insulated to 75 dB(A). It is equipped with automatic climate control and is pressurized. The operator's seat is air suspended, electrically heated and has a lap seat belt.There is a trainer seat with belt.Low effort joystick controls are hydraulic with foot controls for front shovel clam, crawler and swing brake.Full instrumentation and Electronic Text Monitoring (ETM) are provided. AM/FM radio with CD player is included. Dual windshield wipers are synchronized with two-speed and intermittent operation.2 heated rearview mirrors are externally mounted. External metal sun louvers and internal pull-down sun blinds. Left-hand sliding window. All windows are tinted parsol green.
Vehicle Monitoring System
The Electronic Text Monitoring (ETM) system, mounted in the operator's console, continuously monitors the performance of the engine, gearbox, autolube and hydraulic systems. Fault messages are immediately available to the operator via a digital display and in the event of critical malfunctions the engine is also shut down.The digital storage provides failure summary and analysis, which can be downloaded by laptop computer. This data will assist in predicting or reducing downtime.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics