Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Evergreen, Colorado

Looking for a reliable construction equipment rental service in Evergreen ? We can help!

We have the most reliable network of construction equipment suppliers in Evergreen who offer all kinds of machines and tools on rent. Daily, weekly and monthly rentals are available and therefore, you don’t spend a penny extra on the service when you don’t need it.

Renting heavy machinery and tools through us means that you will have access to the newest and best in class equipment. Our vendors keep upgrading their inventories on a regular basis. In fact, vendors are added to the network only on the basis of the quality of machines and tools they have ready-for-rent.

Dial our toll free number today and speak to an expert! Alternatively, you can submit the short contact form on the right and we will get back to learn your heavy construction equipment requirements in Evergreen.

Over the top personalized customer care guaranteed!

Equipment Rental Evergreen, Construction equipment rental Evergreen, Construction rental Evergreen, Heavy Equipment Rental Evergreen.

Engine Powered Scissor Lifts 260MRT

JLG Engine Powered Scissor Lifts 260MRT
Key Specs

  • Machine Width: 5 ft 9 in. / 1.75
  • Platform Capacity: 1250 lb / 566.99 kg
  • Platform Height: 26 ft / 7.92 m

Key Features

  • Narrow 69 in chassis fits into spaces other scissor lifts can't
  • Large work platform and 1,250 lb platform capacity so you can be more productive
  • Standard four wheel drive and 35 percent gradeability keep you going
Power Source
Engine Model Kubota 24.5 hp (Dual Fuel)
Engine Type - Diesel (HRC) Kubota 23.5 hp (Diesel)
Fuel Tank Capacity - Diesel 8 gal. / 28.39 L
General
Brakes Spring Applied, Hydraulically Released
Capacity - Hydraulic Reservoir 15 gal. / 56.78 L
Ground Bearing Pressure 33 psi / 2.31 Kg/cm2
Machine Weight 7360 lb / 3338.44 kg
Performance
Drive Speed - Platform Elevated 0.50 mph / 0.80 km/h
Drive Speed - Platform Lowered 4 mph / 5.63 km/h
Gradeability - 4WD 35 %
Lift Time 27 sec.
Lower Time 21 sec.
Maximum Drive Height 26 ft / 7.92 m
Platform Capacity 1250 lb / 566.99 kg
Platform Capacity - Extension 300 lb / 136.08 kg
Turning Radius - Outside 14 ft 5 in. / 4.39 m
Dimensional Data
Ground Clearance 8 in. / 0.2 m
Machine Height 7 ft 10 in. / 2.37 m
Machine Height - Rails Folded 6 ft 5 in. / 1.96 m
Machine Length 8 ft 3 in. / 2.5 m
Machine Width 5 ft 9 in. / 1.75 m
Platform Dimension A 5 ft 5 in. / 1.65 m
Platform Dimension B 8 ft 6 in. / 2.59 m
Platform Extension Length 4 ft / 1.22 m
Platform Height 26 ft / 7.92 m
Platform Height - Lowered 4 ft 2 in. / 1.26 m
Platform Railing Height 3 ft 8 in. / 1.1 m
Tire Size 26 x 12 Lug Tread
Wheelbase 6 ft 6 in. / 1.98 m
Reach Specifications
Platform Height 26 ft / 7.92 m
Working Height 32 ft / 9.75 m

John Deere Excavators 60G
The possibilities are almost endless.

The 60G's compact size and reduced-tail-swing design enable this small-but-mighty machine to specialize in close-quarters work. But that's not the only reason to run one. Its highly fuel-efficient, direct-injected diesel meets rigid Final Tier 4 emissions standards and is noticeably quiet so you can put it to work almost anywhere, any time. Standard-equipped with backfill blade, mechanical quick-coupler, and auxiliary hydraulics, plus any of the many optional Worksite ProTM attachments, it can make a sizeable impact on your productivity. And profitability.

Engine
Emission Rating Tier 4
Engine Make / Engine Model Yanmar / 4 TNV 98
Net Power, kW (hp) @ Rated rpm 39.6 (53) @ 2000
Displacement, L (cu in) 3.3 (203)
HYDRAULIC SYSTEM
Pump Type Variable axial piston
Total Pump Flow, L/m (gpm) 144 (38)
Auxilliary Hyd. Max Flow Rate, L/m (gpm) 92 (24.2)
UNDERCARRIAGE
Track Width, mm (in) 400 (16)
Overall Track Length, mm (ft) 2500 (8 ft 2 in)
Ground Clearance, mm (in) 340 (13)
Width Over Std Track, mm (ft) 2000 (6 ft 7 in)
Ground Pressure, Std. Track, kPa (psi) 35 (5.12)
Max. Travel Speed - fwd, kph (mph) 4.8 (3)
BLADE
Blade Width, mm (ft) 2000 (6 ft 7 in)
Blade Height, mm (ft) 420 (16)
Blade Max Lift Above Grd. Level, mm (in) 460 (18)
Blade Max Lift Below Grd. Level, mm (in) 370 (15)
PERFOrMANCE
Standard Arm, mm (ft in) 1500 (4 ft 11 in)
Max. Digging Height w/Std Arm, mm (ft) 5960 (19 ft 7 in)
Max. Digging Depth w/Std Arm, mm (ft) 3770 (12 ft 4 in)
Max. Digging Reach w/Std Arm, mm (ft) not published
Max. Dump Height w/Std Arm, mm (ft) 4170 (13 ft 8 in)
Min. Front Swing Radius, mm (ft in) 2450 (8 ft 1 in)
Boom Swing Angle - left, deg ---
Boom Swing Angle - right, deg ---
Lift Cap. Over Front @ 10' G.L. (incl bckt), kg (lb) 3785 (8345)
Lift Cap. Over Side @ 10' G.L. (incl bckt), kg (lb) 1463 (3225)
Max Arm Digging Force, kN (lb) 31.1 (6989)
Max Bucket Digging Force, kN (lb) 41.1 (9237)
Tail Swing Radius, mm (ft in) 1300 (4 ft 3 in)
Swing Speed, rpm 9.5
TRASPORT SPECIFICATIONS
Transport Length, mm (ft) 5760 (18 ft 11 in)
Transport Height, mm (ft) not published
Transport Width, mm (ft) 2000 (6 ft 7 in)
CAPACITIES
Fuel Tank, L (gal) 120 (31.7)
Hydraulic Reservoir, L (gal) 80 (21.1)
WEIGHT
SAE Operating Weight, kg (lb) 6145 (13547)

John Deere Wheeled Excavators 210G LC
Arm yourself to get more done.

When you're ready to take aim at your bottom line, arm yourself with the 210G LC. This excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency "on-demand" cooling system, Interim Tier 4 diesel engine, advanced multifunction monitor, and three productivity modes to allow you to choose your digging style headline the long list of advances. Delivering the power, smoothness, and control you expect from John Deere, the 210G John Deere Excavator LC comes with everything you need to get more done.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere Power Tech / PowerTech PVX
Net Power, kW (hp) @ Rated rpm 119 (159) @ 1900
Displacement, L (cu in) 6.8 (415)
HYDRAULIC SYSTEM
Pump type Variable axial piston
Total Pump Flow, L/m (gpm) 424 (112)
Normal Relief Pressure, kPa (psi) 34300 (4980)
Boost Relief Pressure, kPa (psi) 38000 (5511)
UNDERCARRIAGE
Track Gauge, mm (in) 2390 (7 ft 10 in)
Overall Track Length, mm (ft) 4460 (14 ft 8 in)
Sprocket to Idler Centerline, mm (ft) 3670 (12 ft 1 in)
Width Over Std Track, mm (ft) 3190 (10 ft 6 in)
No. of Lower Rollers/Side 8
No. of Carrier Rollers/Side 2
Ground Clearance, mm (in) 450 (17.7)
Standard Track Pad, mm (in) 800 (32)
Ground Pressure - Std. Pad, kPa (psi) 36.9 (5.35)
Max. Travel Speed - fwd, kph (mph) 5.5 (3.4)
Gradeability, % 70
Gradeability, deg 35
Max. Drawbar pull, kN (lbf) 202.9 (45620)
ARM LENGTH
Reference Arm, mm (ft in) 2910 (9 ft 7 in)
PERFOrMANCE
Max. Reach @ G.L., mm (ft in) 9750 (32 ft )
Max. Dig Depth, mm (ft in) 6680 (21 ft 11 in)
Dig Depth-8' Flat Bottom, mm (ft in) 6500 (21 ft 4 in)
Dig Depth Vertical Wall, mm (ft in) 5990 (19 ft 8 in)
Max. Dump Height, mm (ft in) 7180 (23 ft 7 in)
Lift Cap. Over Front @ 25' G.L. (incl bkt), kg (lbs) 4950 (10650)
Lift Cap. Over Side @ 25' G.L. (incl bkt), kg (lbs) 3000 (6500)
Max Arm Digging Force, kN (lbf) 114 (25543)
Max Bucket Digging Force, kN (lbf) 156 (35138)
Tail Swing Radius, mm (ft) 2890 (9 ft 6 in)
Swing Speed, rpm 13.3
Max. Swing Torque, kNm (lbf - ft) 68.9 (50662)
TRASPORT SPECIFICATIONS
Transport Length, mm (ft in) 9530 (31 ft 3 in)
Transport Height, mm (ft in) 3010 (9 ft 11 in)
Transport Width, mm (in) 3190 (10 ft 6 in)
CAPACITIES
Fuel Tank, L (gal) 403 (106.5)
Hydraulic Reservoir, L (gal) 135 (35.7)
WEIGHT
SAE Operating Weight, kg (lb) 22910 (50463)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics