Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Abington, Connecticut

With extensive construction industry expertise, Our vendors are in a position to advise and assist you in finding the best vendors who offer heavy construction equipment rentals in Abington.

Make us your first choice and you will never have to consider other options each time you need heavy machinery and construction tools and supplies.

Whether you have a long term project at hand or just need to rent excavators, dozers, forklifts, wheel loaders, etc. for a short or long timeframe, you will just pay for what you need for a specific timeframe.

Individuals as well as contractors with small or big equipments, for a day, week or months at a stretch, can dial our toll free number any day to get all kinds of construction equipment on hire. We can also be contacted through the contact-form on the right.

Our teams are always on standby to respond to your queries and concerns at all times.

Equipment Rental Abington, Construction equipment rental Abington, Construction rental Abington, Heavy Equipment Rental Abington.

Komatsu Wheel Loaders WA1200-6
WA1200-6 Wheel Loader

26.2 yd³. 1765 hp. Incredible numbers for Komatsu's largest, most productive wheel loader, the WA1200-6. From the low vibration cab the operator uses his advanced joystick control and modulated clutch drive system to maneuver in tight areas to load trucks up to 320 ton capacity. High stability and breakout force give the operator the confidence he needs to keep up with the production demands of today's mines.

Engine
Model Komatsu SDA16V160E-2
Type Water-cooled, 4-cycle
Aspiration Turbocharged and aftercooled
Number of cylinders 16
Bore x stroke 6.26'' x 7.48'' 159 mm x 190 mm
Piston displacement 3,661 in³ 60 ltr
Governor Electronic fuel control
Flywheel horsepower
SAE J1995 - Gross 1892 HP 1411 kW
ISO 9249/SAE J1349 - Net 1765 HP 1316 kW 1765 hP
Rated rpm 1800 rpm
Fan drive method for radiator cooling Mechanical
Fuel system Modular common rail system direct injection
Lubrication system
Method Screw pump, forced lubrication
Filter Full-flow
Air cleaner Dry-type with double elements and automatic dust evacuation with dust indicator on monitor
Transmission
Torque converter - Type 3-element, single-stage, single-phase
Transmission - Type Full power shift, planetary gear with modulated clutch
Travel Speed (Measured with 60/80 R57 tires):
1st Forward 3.8 mph 6.1 km/h
1st Reverse 3.9 mph 6.3 km/h
2nd Forward 6.9 mph 11.1 km/h
2nd Reverse 7.1 mph 11.4 km/h
3rd Forward 11.6 mph 18.7 km/h
3rd Reverse 12.0 mph 19.3 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, full-floating
Rear Center-pin support, full-floating, 16˚ total oscillation
Reduction gear Spiral bevel gear
Differential gear Straight bevel gear
Final reduction gear Planetary gear, double reduction, oil bath
Brakes
Service brakes Hydraulically actuated, wet, multi-disc brakes actuated on four wheels.
Parking brake Wet, multi-disc, hydraulically-released, spring applied in the transmission.
Secondary brake Parking brake is commonly used
Steering System
Type Articulated, fully-hydraulic power steering
Steering angle 40° each direction
Turning radius outside corner of bucket and teeth 47'0" 14330 mm
Hydraulic System
14330 mm Rated capacity (discharge flow) @1800 engine rpm
Loader pump 269 gal/min 1018 ltr/min
Steering pump 167 gal/min 633 ltr/min
Switch pump 167 gal/min 633 ltr/min
Relief valve setting 4,550 psi 31.4 MPa 320 kg/cm²
Control valves A double spool closed-center hydraulic valve and a steering valve combined with a demand valve to provide optimum flow.
Hydraulic cylinders/Number of cylinders Bore x stroke: Bore x stroke:
Boom/2 14.2''x 72.2'' 360 mm x 1835 mm
Bucket/2 11.8''x 38.8" 300 mm x 985 mm
Steering/2 8.9''x 26.0'' 225 mm x 660 mm
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 14.8 sec
Dump 3.2 sec
Lower (empty) 5.3 sec
OPS FOPS Level 2 Cab
The cab is mounted on viscous damping mounts and is well insulated.
Service Refill Capacities
Cooling system 132 U.S. gal 500 ltr
Fuel tank 1,347 U.S. gal 5100 ltr
Engine 74 U.S. gal 280 ltr
Hydraulic system 343 U.S. gal 1300 ltr
Differential, final drive (each axle) 177 U.S. gal 670 ltr
Torque converter and transmission 92 U.S. gal 350 ltr
Brake oil 20 U.S. gal 75 ltr
Brake cooling 77 U.S. gal 290 ltr
Tires
Select proper tires based on job requirements. 500 ltr
Standard rim size 47.00-57/5.0
Standard tire size 60/80 R57

John Deere Waste Equipment 524K WH
Haste moves waste.

If yours is a vast wasteland, our 524K WH is your kind of waste handler equipment. This production machine comes fully fortified to tackle tough transfer-station tasks, shift after shift. An innovative Quad-CoolTM system with proportional fan ensures that everything keeps cool. Extensive guarding minimizes debris buildup and helps keep close encounters with obstacles from slowing you down.

And a solid-state electrical-distribution center, durable sealed-switch module, and state-of-the-art diagnostic multifunction monitor further boost uptime and productivity. That's just the beginning of all the ways the 524K WH Waste Handler helps take out the trash.

ENGINE
Engine Make / Engine Model John Deere / PowerTech E 6068H
Emission Rating Tier 3
Net Power, kW (hp) @ Rated rpm 110 (146) @ 2000
Displacement, L (cu in) 6.8 (415)
Net Peak Torque, N-m (lb-ft) 607 (448)
Calculated % Torque Rise 47
ELECTRICAL
Volts 24
Alternator amps 80
TRANSMISSION
Type Powershift
Max. Travel Speed - fwd, kph (mph) 36 (22.4)
Max. Travel Speed - rev, kph (mph) 24.1 (15)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Wet Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 165 (44)
System Pressure, kPa (psi) 24994 (3625)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 1.9 (2.5)
Bucket Capacity Max., cu m (cu yd) 2.1 (2.75)
Breakout Force, Std Bucket, kN (lb) 83.3 (18748)
Ride Control Optional
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 2.1 (2.75)
Tire Size Standard 20.5 R25
TIPPING LOAD
Straight, kg (lb) 8851 (19512)
Full Turn, kg (lb) 7656 (16879)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4120 (13 ft 6 in
Dump Clear @ 45 deg, mm (ft in) 3120 (10 ft 3 in)
Reach @ 7', mm (ft in) 1730 (5 ft 8 in)
Reach @ Full Height, mm (ft in) 990 (3 ft 3 in)
Wheelbase, mm (ft in) 2930 (9 ft 7 in)
Clearance Circle, mm (ft in) 12080 (39 ft 8 in)
Overall Length, mm (ft in) 7670 (25 ft 2 in)
Height to Top of Cab, mm (ft in) 3250 (10 ft 8 in)
Ground Clearance, mm (in) 400 (15.7)
CAPACITIES
Fuel Tank, L (gal) 242 (64)
Hydraulic Reservoir, L (gal) 92 (24.3)
Weight
SAE Operating Weight, kg (lb) 12623 (27829)
Metric Ton Weight, kg (lb) 12.623 (27.829)

Komatsu Wheel Loaders WA270-7
WA270-7 Wheel Loader

The Komatsu Tier 4 interim technology on the WA270-7 is designed to keep the operator working rather than having to stop and regenerate while saving up to 10% on fuel burned. The hydrostatic drive system on the WA270-7 gives the operator quick and powerful response, self-braking effect of dynamic braking and traction control. A multi-function mono-lever, rearview camera system with separate screen and heated, air ride suspension seat give the operator a comfortable and ergonomic work environment.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed, electronic
Horsepower:
Gross - SAE J1995 153 HP 115 kW
Net - ISO 9249/SAE J1349 149 HP 111 kW 149 HP
Rated rpm 2000 rpm
Max power - ISO 14396 @ 1900 rpm 150 HP 112 kW
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Transmission Hydrostatic, 1 pump, 2 motors with speed range select
Travel speed Forward Reverse
1st 0.6 - 8.1 mph 0.6 - 8.1 mph
2nd 8.1 mph 8.1 mph
3rd 11.8 mph 11.8 mph
4th 23.6 mph 23.6 mph
Measured with 20.5-25 tires
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 20° total oscillation
Reduction gear Spiral bevel gear
Differential gear Torque proportioning
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet, multi-disc brake on transfer output shaft.
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 38° each direction (40° to max end stop)
Minimum turning radius at the center of outside tire 17' 0" 5175 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump, in common with loader control
Capacity (at rated rpm) 39.6 U.S. gal/min 150 ltr/min
Relief valve setting 3,000 psi 20.6 MPa 210 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 2.76" x 17.8" 70 mm x 453 mm
Loader control:
Hydraulic pump Piston pump, in common with steering system
Capacity (at rated rpm) 39.6 U.S. gal/min 150 ltr/min
Relief valve setting 4,555 psi 320 kg/cm² 31.4 MPa
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke: bore x stroke:
Boom cylinder / 2 4.3" x 28.2" 110 mm x 717 mm
Bucket cylinder / 1 5.5" x 18.9" 140 mm x 480 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.7 sec
Dump 2.0 sec
Lower (Empty) 3.2 sec
Service Refill Capacities
Cooling system 7.4 U.S. gal 28 ltr
Fuel tank 49.1 U.S. gal 186 ltr
Engine 6.7 U.S. gal 23 ltr
Hydraulic system 20.6 U.S. gal 78 ltr
Axle front 4.9 U.S. gal 18.5 ltr
Axle rear 4.8 U.S. gal 18 ltr
Transfer 2.1 U.S. gal 7 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics