Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in East Hartland, Connecticut

With extensive construction industry expertise, Our vendors are in a position to advise and assist you in finding the best vendors who offer heavy construction equipment rentals in East Hartland.

Make us your first choice and you will never have to consider other options each time you need heavy machinery and construction tools and supplies.

Whether you have a long term project at hand or just need to rent excavators, dozers, forklifts, wheel loaders, etc. for a short or long timeframe, you will just pay for what you need for a specific timeframe.

Individuals as well as contractors with small or big equipments, for a day, week or months at a stretch, can dial our toll free number any day to get all kinds of construction equipment on hire. We can also be contacted through the contact-form on the right.

Our teams are always on standby to respond to your queries and concerns at all times.

Equipment Rental East Hartland, Construction equipment rental East Hartland, Construction rental East Hartland, Heavy Equipment Rental East Hartland.

JCB Wheel Loaders 457

457

The all-new JCB 457 gives you, epic style, visibility, power, speed, strength, efficiency and quality. Featuring a powerful new MTU diesel engine that meets Tier 4 final emissions without the need for a costly and in-efficient DPF. New JCB CommandPlus cab provides the ultimate in operator comfort and productivity. Unrivalled visibility, command driving position and seat mounted controls keep you in total command. Innovative design provides easier ground level service access with a one piece automatic opening bonnet. Tailored service packages and the best dealer backup complete the picture. A machine designed and built to be everything you're looking for in a wheeled loader.

Maximum Engine Power
Maximum Engine Power 258hp (193kW)
Max Loader Capacity
Max Loader Capacity 4.6yd3 (3.5m3)
Operating Weight
Operating Weight 43677lb (19812kg)

JCB Compact Track Loaders 205T

205T

The new vertical lift 2050lb (930kg) rated operating capacity JCB 205T is the largest small platform compact track loader in our range and incorporates our unique single boom and side entry design. Designed for comfort, safety, economy, productivity and durability in the USA (home of tracked loaders), the 205T's 62hp (46kW) Kohler engine is tried, tested and proven.

The 205T has on average 60% better visibility and a 46% larger cab than rival manufacturers tracked skid steer designs, and there are a whole host of other benefits as well. Like ergonomic controls, an extremely tough powerful boom and a low cost of ownership.

Loader Performance
Operating Capacity
Operating Weight (3889kg)
Engine
Net Engine Power 62hp (46kW)

Komatsu Trucks 730E-8

730E-8 Electric Drive Truck

The 203 ton capacity 730E-8 is a very versatile electric drive truck that features 1,860 flywheel horsepower. The cab has an integral ROPS, air ride seat, dynamic retarding and power steering with auto emergency steering to make the operator comfortable and more productive. To make the 730E more productive, a trolley assist option is available for circumstances where an overhead electrified trolley system can be used.

Engine
Make and model* Komatsu SSDA16V159
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
Gross horsepower** @ 1900 rpm 2,000 HP 1492 kW
Net flywheel power*** @ 1900 rpm 1,884 HP 1405 kW
* Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America.
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC current
Alternator GTA-49
Dual impeller in-line blower 13,900 cfm 393 m³/min
Control AC Torque Control System
Motorized wheels* GEB35 Induction Traction Motors
Ratio 30.8:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, tires
Standard tire* 37.00 R57
Flange mount rim 686 mm x 1448 mm x 152 mm 27'' x 57'' x 6'' rim assembly. Rims rated at 758 kPa 110 psi cold inflation pressure.
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Eyebrow, rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet - Outer (1379 MPa 200,000 psi tensile strength steel) 0.63'' 16 mm
Floor sheet - Center (1379 MPa 200,000 psi tensile strength steel) 0.75'' 19 mm
Front sheet (1379 MPa 200,000 psi tensile strength steel) 0.39'' 10 mm
Side sheet (1379 MPa 200,000 psi tensile strength steel) 0.31'' 8 mm
Canopy sheet (690 MPa 100,000 psi tensile strength steel) 0.24'' 6 mm
Capacity struck 153 yd³ 117 m³
SAE heaped 2:1 193 yd³ 148 m³
Standard Komatsu body weight 62,100 lb 28169 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab, adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material 70,000 psi 482.6 mPa tensile strength steel
Casting material 90,000 psi 620.5 mPa tensile strength steel
Rail width 11.02'' 280 mm
Rail depth (minimum) 31.38'' 797 mm
Top and bottom plate thickness 1.26'' 32 mm
Side plate thickness 0.75'' 19 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
System meets ISO 3450/1996.
Service brakes: all-hydraulic actuated.
Front: Wheel speed disc. Three calipers on a 1213 mm / 47.75" O.D. disc
Rear Dual disc armature speed. Two 635 mm / 25" O.D. discs per side. One caliper per disc.
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch-activated
Parking brakes Spring-applied, hydraulically released, with speed application protection.
Electric dynamic retarder (max.) 3,200 hp / 2387 kW Continuously rated high-density blown grids w/retard at engine idle and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.28'' 312 mm
Max. rear stroke 10.98'' 279 mm
Max. rear axle oscillation ±5.3°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank
Radiator frontal area 50.1 ft² 4.65 m²
Service Capacities
Cooling system 117 U.S. gal 441 L
Crankcase* 59 U.S. gal 223 L
Hydraulic system 210 U.S. gal 795 L
Motor gear box (each) 10 U.S. gal 38 L
Fuel 800 U.S. gal 3028 L
*Includes lube oil filters
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 89' 27.2 m
Reservoir 135 U.S. gal 511 L
Filtration In-line replaceable elements
Suction Single, full-flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 19 sec
Power-down 10.5 sec
Float--down empty 12 sec
Pumps: Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 666 lpm 176 gpm at 1900 rpm and 18961 kPa 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 254 lpm 67 gpm at 1900 rpm and 19134 kPa 2,775 psi
System relief pressures:
Hoist 2,500 psi 17237 kPa
Steering and brake 4,000 psi 27580 kPa
Electric System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24-volt 250 amp
Lighting 24 volt
Cranking motors Two/24 volt

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics