Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Farmington, Connecticut

With extensive construction industry expertise, Our vendors are in a position to advise and assist you in finding the best vendors who offer heavy construction equipment rentals in Farmington.

Make us your first choice and you will never have to consider other options each time you need heavy machinery and construction tools and supplies.

Whether you have a long term project at hand or just need to rent excavators, dozers, forklifts, wheel loaders, etc. for a short or long timeframe, you will just pay for what you need for a specific timeframe.

Individuals as well as contractors with small or big equipments, for a day, week or months at a stretch, can dial our toll free number any day to get all kinds of construction equipment on hire. We can also be contacted through the contact-form on the right.

Our teams are always on standby to respond to your queries and concerns at all times.

Equipment Rental Farmington, Construction equipment rental Farmington, Construction rental Farmington, Heavy Equipment Rental Farmington.

Komatsu Excavators PC228USLC-8

PC228USLC-8 Hydraulic Excavator

Komatsu pioneered the tight tail swing design and has perfected it in the PC228USLC-8. With this excavator you can work in one lane of traffic without disturbing the other lane. Beyond its' tight swing capability, the Komatsu Excavators PC228USLC-8 has the same digging and lifting power as most standard competitive excavators.

Engine
Model Komatsu SAA6D107E-1*
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged and air-to-air aftercooled
Number of cylinders 6
Bore 4.21" 107 mm
Stroke 4.88" 124 mm
Piston displacement 408 in³ 6.69 ltr
Power rating
Gross (SAEJ1995) 155 HP @ 2000 rpm 116 kW @ 2000 rpm
Net (ISO 9249/SAEJ1349) 148 HP @ 2000 rpm 110 kW @ 2000 rpm
Fan drive type Mechanica
Governor All-speed control, electronic
*EPA Tier 3 and EU Stage 3A emissions certified.
Hydraulics
Type HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 5
Main pump Variable-capacity piston pump.
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 116 u.s. gal/min 439 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi 37.3 MPa 380 kgf/cm²
Travel circuit 5,400 psi 37.3 MPa 380 kgf/cm²
Swing circuits 4,120 psi 28.4 MPa 290 kgf/cm²
Pilot circuit 470 psi 3.2 MPa 33 kgf/cm²
Hydraulic cylinders:
(Number of cylinders – bore x stroke x rod diameter)
Boom / 2 4.7" x 54.5" x 3.3" 120 mm x 1385 mm x 85 mm
Arm / 1 5.3" x 58.7" x 3.7" 135 mm x 1490 mm x 95 mm
Bucket for 2.41 m 7'11" and 2.93 m 9'7" Arm / 1 4.5" x 44.1" x 3.2" 115 mm x 1120 mm x 80 mm
Operating Weight (APROXIMATE)
Operating weight, including 5700 mm / 18'8" one-piece boom, 2925 mm / 9'7" arm, SAE heaped 0.80 m³ / 1.05 yd³ backhoe bucket, operator, lubricant, coolant, full fuel tank, and the standard equipment.
Shoes Operating Weight Ground Pressure
600 mm
24"
24130 kg
53,195 lb
0.51 kg/cm²
7.28 psi
700 mm
28"
24395 kg
53,785 lb
0.44 kg/cm²
6.21 psi
800 mm
31.5"
24675 kg
54,405 lb
0.39 kg/cm²
5.62 psi
Swing System
Drive method Hydrostatic
Swing reduction Planetary gear type, double reduction
Swing circle lubrication Grease-bathed
Swing lock Mechanical disc brake
Swing speed 1.0 rpm
Swing torque 48,124 ft lbs 6656 kg.m
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 45,410 lb 202 kN 20600 kgf
Gradeability 70%, 35°
Maximum travel speed: (Auto-Shift)
High 3.4 mph 5.5 km/h
Mid 2.5 mph 4.1 km/h
Low 1.9 mph 3.0 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Undercarriage
Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes (each side): 49
Number of carrier rollers (each side): 2
Number of track rollers (each side): 9
Service Refill Capacities
Fuel tank 84.5 U.S. gal 320 ltr
Coolant 5.5 U.S. gal 21.0 ltr
Engine 6.1 U.S. gal 23.1 ltr
Final drive, each side 1.4 U.S. gal 5.2 ltr
Swing drive 1.9 U.S. gal 7.1 ltr
Hydraulic tank 33.3 u.s. gal 126 ltr 33.3 u.s. gal

Electric Scissor Lift 2646ES

JLG Electric Scissor Lift 2646ES
Key Specs

  • Machine Width: 3 ft 10 in. / 1.17 m
  • Platform Height: 26 ft / 7.92 m

Key Features

  • Quieter, cleaner operation for a variety of environments
  • Electric drive and integrated components with only two hydraulic hoses and four hydraulic fittings on the entire machine will keep you on the job longer and reduce your operating costs by reducing chances for leaks and service calls
  • Tight turning radius for great maneuverability
Power Source
Batteries 4 x 6V, 220 amp-hr
Charger 20 amp automatic
General
Brakes Electric, Friction
Capacity - Hydraulic Reservoir 2 gal. / 6.44 L
Ground Bearing Pressure 87 psi / 6.09 Kg/cm2
Hydraulic Pump Fixed Displacement Gear
Machine Weight 4975 lb / 2256.62 kg
Performance
Drive Speed - Platform Elevated 0.50 mph / 0.80 km/h
Drive Speed - Platform Lowered 3 mph / 4.02 km/h
Gradeability 25 %
Lift Time 41 sec.
Lower Time 50 sec.
Maximum Drive Height 26 ft / 7.92 m
Maximum Lift Height 26 ft / 7.92 m
Platform Capacity - Extension 250 lb / 113.40 kg
Platform Capacity - Unrestricted 1000 lb / 453.59 kg
Turning Radius - Outside 7 ft 11 in. / 2.42 m
Dimensional Data
Ground Clearance 5 in. / 0.13 m
Machine Height 7 ft 9 in. / 2.36 m
Machine Height - Rails Folded 6 ft 6 in. / 1.97 m
Machine Length 8 ft 3 in. / 2.5 m
Machine Width 3 ft 10 in. / 1.17 m
Platform Dimension A 8 ft 3 in. / 2.5 m
Platform Dimension B 3 ft 8 in. / 1.12 m
Platform Extension Length 4 ft 2 in. / 1.27 m
Platform Height 26 ft / 7.92 m
Platform Height - Lowered 4 ft 2 in. / 1.26 m
Platform Railing Height 3 ft 7 in. / 1.1 m
Tire Size 16 x 5 in
Wheelbase 6 ft 10 in. / 2.08 m
Reach Specifications
Platform Height 26 ft / 7.92 m
Working Height 32 ft / 9.75 m

Komatsu Excavators PC27MR-3
PC27MR-3 Hydraulic Excavator

Small but powerful, the PC27MR-3 is constructed like a big Komatsu excavator with a high strength x-frame, PPC joysticks, pattern change valve but with the addition of a swinging boom, three track option and tight tail swing. If you need versatility in a small package, Komatsu mini-excavators are just what you are looking for.

Engine
Model Komatsu 3D82AE-6
Type Direct injection
Piston displacement 81 in³ 1.33 ltr
Horsepower @ 2600 rpm:
Net (ISO 9249/SAE J1349) 25.7 HP 19.2 kW
Electric System
Operation voltage 12 V
Battery 58 Ah
Alternator 40 A
Starter 2.3 kW
Hydraulic System
Type HydrauMind
Main pump:
Type Variable displacement x 1Gear x 1
Maximum flow 18.7 x 1 + 5.7 gal/min 70.6 x 1 + 21.4 ltr/min
Hydraulic motors:
Travel Variable displacement x 2
Swing Fixed displacement x 1
Maximum pressure setting 3,560 psi 250 kg/cm²
Auxiliary flow 13.2 gal/min 50 ltr/min
Performance
Travel speed:
High 3.0 mph 4.8 km/hr
Low 1.6 mph 2.6 km/hr
Swing speed 9.2 rpm
Ground pressure 4.1 psi 0.29 kg/cm²
Max. drawbar pull 7,050 lb 3200 kg
Gradeability 30°
Bucket digging force (ISO) 4,920 lb 2230 kg
Arm crowd force (ISO) 2,646 lb 1200 kg
Drives and Brakes
Drive method Hydrostatic
Type of travel brake Hydraulic lock
Type of travel shoe Rubber
Undercarriage
Adjustment of the track tension Grease gun
Number of carrier rollers (each side) 1
Number of track rollers (each side) 4
Refill Capacities
Fuel tank 11.6 U.S. gal 44 ltr
Hydraulic tank 3.7 U.S. gal 14 ltr
Engine 1.3 U.S. gal 5 ltr
Coolant 0.9 U.S. gal 3.3 ltr
Operating Weight (approximate)
Operating weight(with ROPS canopy and rubber shoe) 6,460 lb 2930 kg
Blade
Width x height 5'1" x 1'1" 1550 x 325 mm

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics