Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Hampton, Connecticut

With extensive construction industry expertise, Our vendors are in a position to advise and assist you in finding the best vendors who offer heavy construction equipment rentals in Hampton.

Make us your first choice and you will never have to consider other options each time you need heavy machinery and construction tools and supplies.

Whether you have a long term project at hand or just need to rent excavators, dozers, forklifts, wheel loaders, etc. for a short or long timeframe, you will just pay for what you need for a specific timeframe.

Individuals as well as contractors with small or big equipments, for a day, week or months at a stretch, can dial our toll free number any day to get all kinds of construction equipment on hire. We can also be contacted through the contact-form on the right.

Our teams are always on standby to respond to your queries and concerns at all times.

Equipment Rental Hampton, Construction equipment rental Hampton, Construction rental Hampton, Heavy Equipment Rental Hampton.

New Holland Skid Steer Loader L223

New Holland Skid Steer Loader L223
THE SUPER BOOM® ADVANTAGE
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model FPT / F5H FL463
Bore/stroke, in (mm) 3.9 x 4.1 (99 x 110)
Displacement, in3 (L) 195 (3.2)
Fuel injection HPCR Direct
Air intake Turbocharged with external CEGR
Horsepower per SAE J1349 Gross hp (kW) 74 (55) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW) 68 (51) @ 2500 rpm
Peak torque, lb-ft (Nm) 232 (314) @1400 rpm
Power Train
Travel speed, low range, mph (km/h) 7.0 (11.3)
Travel speed, high range (optional),mph (km/h) 10.5 (16.9)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 129.4 (3287)
Top of ROPS, in (mm) 78.8 (2002)
Bottom of level bucket, fully raised,in (mm) 122.6 (3115)
Overall length without attachment with coupler, in (mm) 117.8 (2993)
Dump angle, degrees 55°
Dump reach (max height), in (mm) 32.3 (821)
Rollback, bucket on ground, degrees 34°
Rollback, bucket at full height, degrees 85°
Wheelbase, in (mm) 52 (1322)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 24°
Clearance circle without bucket, in(mm) 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Rear axle to bumper, in (mm) 40.7 (1034)
Overall width, in (mm) 69.6 (1768)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 24.2 (91.5)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2250 (1020)
Tipping load, lbs (kg) 4500 (2045)
Breakout force, lift cylinder, lbs (kN) 5080 (22.6)
Breakout force, bucket cylinder, lbs (kN) 8620 (38.3)
Operating weight, lbs (kg) 7400 (3350)

New Holland Skid Steer Loader L216

Skid Steer Loader 216

MORE DIGGING AND PUSHING POWER BY DESIGN
This model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model ISM / N844LT
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135.2 (2.216)
Fuel injection Indirect
Air intake Turbocharged with external EGR
Horsepower per SAE J1349 Gross hp (kW) 60 (45) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 57 (42) @ 2800 rpm
Peak torque, lb-ft (Nm) 139 (188) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.4 (11.9)
Travel speed, high range (optional),mph (km/h) NA
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 112 (2845)
Top of ROPS, in (mm) 75.5 (1919)
Bottom of level bucket, fully raised,in (mm) 105.6 (2682)
Overall length without attachment with coupler, in (mm) 95.9 (2435)
Dump angle, degrees 40°
Dump reach (max height), in (mm) 18.5 (469)
Rollback, bucket on ground, degrees 26°
Rollback, bucket at full height, degrees 95°
Wheelbase, in (mm) 37 (941)
Ground clearance (bottom of belly pan),in (mm) 7 (178)
Angle of departure, degrees 22°
Clearance circle without bucket, in(mm) 48.7 (1237)
Clearance circle rear, in (mm) 56.4 (1433)
Rear axle to bumper, in (mm) 33.8 (858)
Overall width, in (mm) 59.8 (1518)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 18.4 (69.7)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) -
Performance Specs
Rated operating load, 50% tip, lbs (kg) 1600 (725)
Tipping load, lbs (kg) 3200 (1455)
Breakout force, lift cylinder, lbs (kN) 3310 (14.7)
Breakout force, bucket cylinder, lbs (kN) 5270 (23.4)
Operating weight, lbs (kg) 5510 (2505)

John Deere Waste Equipment 644K WH

Haste moves waste.

If yours is a vast wasteland, our 644K WH is your kind of waste handler equipment. This production machine comes fully fortified to tackle tough transfer-station tasks, shift after shift. An innovative Quad-CoolTM system with proportional fan ensures that everything keeps cool. Extensive guarding minimizes debris buildup and helps keep close encounters with obstacles from slowing you down. And a solid-state electrical-distribution center, durable sealed-switch module, and state-of-the-art diagnostic multifunction monitor further boost uptime and productivity. That's just the beginning of all the ways the 644K WH Waste Handler helps take out the trash.

FEATURES & SPECS

  • Tier 3 emission-certified engine
  • Industry-leading 360-degree visibility
  • Countershaft-type PowerShiftTM transmission
  • Z-Bar and High-Lift Z-Bar configurations
Net Power 173 kW (232 hp) @ 1,700 rpm
Operating Weight 21 247-22 043 kg (46,842-48,596 lb.)
Bucket Capacities 3.8-5.4 m3 (5.0-7.0 cu. yd.)
Dump Clearance 2.69-3.45 m (8 ft. 10 in.-11 ft. 4 in.)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics