Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Jewett City, Connecticut

With extensive construction industry expertise, Our vendors are in a position to advise and assist you in finding the best vendors who offer heavy construction equipment rentals in Jewett City.

Make us your first choice and you will never have to consider other options each time you need heavy machinery and construction tools and supplies.

Whether you have a long term project at hand or just need to rent excavators, dozers, forklifts, wheel loaders, etc. for a short or long timeframe, you will just pay for what you need for a specific timeframe.

Individuals as well as contractors with small or big equipments, for a day, week or months at a stretch, can dial our toll free number any day to get all kinds of construction equipment on hire. We can also be contacted through the contact-form on the right.

Our teams are always on standby to respond to your queries and concerns at all times.

Equipment Rental Jewett City, Construction equipment rental Jewett City, Construction rental Jewett City, Heavy Equipment Rental Jewett City.

Komatsu Wheel Loaders WA320-7
WA320-7 Wheel Loader

The WA320-7 marries a well proven hydrostatic drivetrain with Komatsu's industry leading Tier 4 interim engine technology that reduces fuel economy by up to 10%. The WA320-7 has a parallel lift boom with 10% more lift than the previous model and z-bar linkage for high breakout force for digging.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed, electronic
Horsepower:
Gross - SAE J1995 170 HP 127 kW
Net - ISO 9249/SAE J1349 165 HP 123 kW
Rated rpm 2100 rpm
Max power - ISO 14396 @ 1900 rpm 173 HP 129 kW
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Transmission Hydrostatic, 1 pump, 2 motors with speed range select
Travel speed Forward Reverse
1st 0.6 - 8.1 mph 0.6 - 8.1 mph
2nd 8.1 mph 8.1 mph
3rd 11.6 mph 11.6 mph
4th 23.6 mph 23.6 mph
Measured with 20.5-25 tires
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 24° total oscillation
Reduction gear Spiral bevel gear
Differential gear Torque proportioning
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet, multi-disc brake on transfer output shaft.
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 38.5° each direction (40° to max end stop)
Minimum turning radius at the center of outside tire 17'8" 5380 mm
Hydraulic System
Steering system:
Hydraulic pump Gear type pump
Capacity (at rated rpm) 29.1 U.S. gal/min 110 ltr/min
Relief valve setting 2,700 psi 18.6 MPa 190 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 2.8" x 17.8" 70 mm x 453 mm
Loader control:
Hydraulic pump Gear type pump
Capacity 20.6 U.S. gal/min 78 ltr/min
Relief valve setting 3,000 psi 20.6 MPa 210 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Boom cylinder / 2 5.1" x 28.2" 130 mm x 717 mm
Bucket cylinder / 1 5.9" x 19.3" 150 mm x 491 mm
Control valve 3-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.7 sec
Dump 1.6 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 6.1 U.S. gal 23 ltr
Fuel tank 64.7 U.S. gal 245 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 23.7 U.S. gal 90 ltr
Axle front 7.1 U.S. gal 27 ltr
Axle rear 6.7 U.S. gal 25.5 ltr
Transfer case 1.5 U.S. gal 5.8 ltr

Komatsu Excavators PC55MR-3
PC55MR-3 Hydraulic Excavator

You'll be surprised the amount a work 38 horsepower can do when it's harnessed in the PC55MR-3. Constructed like a big Komatsu excavator with a high strength x-frame, PPC joysticks, pattern change valve but with the addition of a swinging boom, three track option and tight tail swing, the  PC55MR-3 Hydraulic Excavator is ready for any challenge you can put in it's way.

Engine
Model Komatsu 4D88E-6
Type Direct injection
Piston displacement 134 in³ 2.19 ltr
Horsepower @ 2400 rpm:
Net (ISO 9249/SAE J1349) 38.2 HP 28.5 kW
Electric System
Operation voltage 12 V
Battery 72 Ah
Alternator 40 A
Starter 2.3 kW
Hydraulic System
Type HydrauMind
Main pump:
Type Variable displacement x 2Gear x 1
Maximum flow 14.1 x 2 + 8.9 gal/min 53.5 x 2 + 33.8 ltr/min
Hydraulic motors:
Travel Variable displacement x 2
Swing Fixed displacement x 1
Maximum pressure setting 3,840 psi 270 kg/cm²
Auxiliary flow 18.5 gal/min 70 ltr/min
Performance
Travel speed:
High 2.9 mph 4.6 km/hr
Low 1.7 mph 2.8 km/hr
Swing speed 9.0 rpm
Ground pressure 4.4 psi 0.31 kg/cm²
Max. drawbar pull 9,440 lb 4280 kg
Gradeability 30°
Bucket digging force (ISO) 8,770 lb 3980 kg
Arm crowd force (ISO) 5,380 lb 2440 kg
Drives and Brakes
Drive method Hydrostatic
Type of travel brake Hydraulic lock
Type of travel shoe Rubber
Undercarriage
Adjustment of the track tension Grease gun
Number of carrier rollers (each side) 1
Number of track rollers (each side) 4
Refill Capacities
Fuel tank 17.2 U.S. gal 65 ltr
Hydraulic tank 5.3 U.S. gal 20 ltr
Engine 2.0 U.S. gal 7.5 ltr ltr
Coolant 2.2 U.S. gal 8.5 ltr
Operating Weight (approximate)
Operating weight(with ROPS canopy and rubber shoe) 11,380 lb 5160 kg
Blade
Width x height 6'5" x 1'2" 1960 x 355 mm

Komatsu Excavators PC290LC-10 Super Long Front

PC290LC-10 Super Long Front 60' Reach

Add a super long front to a super productive and stable excavator like the PC290LC-10 and you create an incredibly versatile machine with a huge working range. The functions and operations are that of the standard excavator but with a wide variety of ditch cleaning and general purpose buckets for dredging, cleaning and sloping applications.

Notes:
  • The details in this specification brochure are based on Dash 8 and Dash 10 models as indicated. Some attachments may be installed on prior models but specifications may vary. Contact Young Corporation for details.
  • Variations to the specifications in this brochure can be designed and produced in accordance with customer requirements by contacting Young Corporation with details.
  • SUPER LONG FRONT ATTACHMENTS are designed for “LIGHT DUTY" work only. Excavating work or heavy hoisting may result in side loads and other activities that will damage the machine.
  • Disassembly may be required due to transport restrictions.
  • Illustrations may include optional equipment.
  • Operating weights include additional counterweight when required.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics