Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Killingworth, Connecticut

With extensive construction industry expertise, Our vendors are in a position to advise and assist you in finding the best vendors who offer heavy construction equipment rentals in Killingworth.

Make us your first choice and you will never have to consider other options each time you need heavy machinery and construction tools and supplies.

Whether you have a long term project at hand or just need to rent excavators, dozers, forklifts, wheel loaders, etc. for a short or long timeframe, you will just pay for what you need for a specific timeframe.

Individuals as well as contractors with small or big equipments, for a day, week or months at a stretch, can dial our toll free number any day to get all kinds of construction equipment on hire. We can also be contacted through the contact-form on the right.

Our teams are always on standby to respond to your queries and concerns at all times.

Equipment Rental Killingworth, Construction equipment rental Killingworth, Construction rental Killingworth, Heavy Equipment Rental Killingworth.

Unable to parse entered address. API response code: REQUEST_DENIED

John Deere Crawler Dozers 450J LT
Push productivity to the next level.

Often imitated but never duplicated, the John Deere 450J Dozer continues to set the standard for operator control and productivity. Backed by 30-plus years of hydrostatic experience, its unique state-of-the-art Total Machine Control (TMC) enables an operator to customize machine operation and response to personal preferences. Coupled with an uncommonly smooth full-feature hydrostatic transmission, the John Deere Crawler 450J delivers unsurpassed productivity, uptime, and daily operating costs. That's for starters.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech M 4045
Net Power, kW (hp) @ Rated rpm 52 (70) @ 2200
Displacement, L (cu in) 4.5 (276)
Transmission
Transmission Manufacturer Hydrostatic
Speed Range - forward 1
Speed Range - reverse 1
Maximum Speeds Forward, kph (mph) 8 (5)
Maximum Speeds Reverse, kph (mph) 8 (5)
Final Drives
Type Triple Reduction
Steering
Type Hydrostatic
Hydraulic System
Pump Type Gear Type Pump
Pump Flow, L/min (gpm) 57 (15)
System pressure, kPa (psi) 20680 (3000)
Undercarriage
Track Gauge, mm (ft in) 1392 (4 ft 7 in)
Length of Track on Ground, mm (ft in) 2184 (7 ft 2 in)
Standard shoe type Single Grouser
Ground Contact Area, cm sq (sq in) 17755 (2752)
Ground Pressure, kPa (psi) 40.7 (5.9)
No. of Track Rollers 6
Track Pitch, mm (in) 160 (6.29)
Track Shoes, each side 40
Track Oscillation --
Dozer
Blade Width, mm (ft in) 2464 (8 ft 1 in)
Blade Height, mm (ft in) 955 (3 ft 2 in)
SAE Blade Capacity, cu m (cu yd) 1.6 (2.1)
Blade Lift Height, mm (ft in) 772 (2 ft 6 in)
Digging Depth, mm (in) 528 (20.8)
Overall Width with Blade Angled, mm (ft in) not published
Blade Tilt, mm (ft in) 338 (1 ft 1 in)
Dimensions
Height w/ROPS, mm (ft in) 2747 (9 ft )
Length w/Dozer, mm (ft in) 3940 (12 ft 11 in)
Ground Clearance, mm (in) 345 (13.6)
Capacities
Fuel Tank, L (gal) 178 (47)
Hydraulic Reservoir, L (gal) 32.2 (8.5)
Weight
SAE Operating Weight, kg (lb) 7386 (16283)

John Deere Crawler Dozers 650K XLT
We hear you loud and clear.

When our customers sound off, we listen. So when you asked us to turn down the noise and turn up productivity on our 650K Crawler Dozer, we responded with a spacious, redesigned cab that's up to 50% quieter. And a more powerful EPA Interim Tier 4 (IT4)/EU Stage IIIB diesel engine.

Equipment owners and operators will also find lots more to like in the K-Series - such as a hydraulic-driven fan that provides efficient cooling, reduces noise, and conserves precious fuel. And a convenient sealed-switch module for fingertip control of numerous one-of-a-kind features and functions.

The K-Series are loaded with even more performance enhancements, like Total Machine Control (TMC). Standard on all of our K-Series Crawler Dozers, this performance-enhancing feature provides customized decelerator mode and response, forward/reverse ground-speed ranges, steering modulation, and more. It enables your operators to do their best, by being themselves.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech PWX 4045
Net Power, kW (hp) @ Rated rpm 75 (101) @ 2200
Displacement, L (cu in) 4.5 (276)
Transmission
Type Hydrostatic
Speed Range - forward 1
Speed Range - reverse 1
Maximum Speeds Forward, kph (mph) 8 (5)
Maximum Speeds Reverse, kph (mph) 8 (5)
Final Drives
Type Triple Reduction
Steering
Type --
Hydraulic System
Pump Type Open Centre - Gear Pump
Pump Flow, L/min (gpm) 57 (15)
System pressure, kPa (psi) 20680 (3000)
Undercarriage
Track Gauge, mm (ft in) 1550 (5 ft 1 in)
Length of Track on Ground, mm (ft in) 2337 (7 ft 8 in)
Standard shoe type Single Grouser - Moderate Service
Ground Contact Area, cm sq (sq in) 21479 (3329)
Ground Pressure, kPa (psi) 40.6 (5.89)
No. of Track Rollers 7
Track Pitch, mm (in) 171 (6.7)
Track Shoes, each side 40
Track Oscillation --
Dozer
Blade Width, mm (ft in) 2667 (8 ft 9 in)
Blade Height, mm (ft in) 1067 (3 ft 6 in)
SAE Blade Capacity, cu m (cu yd) 2.2 (2.9)
Blade Lift Height, mm (ft in) 818 (2 ft 8 in)
Digging Depth, mm (in) 500 (19.7)
Overall Width with Blade Angled, mm (ft in) not published
Blade Tilt, mm (ft in) 363 (1 ft 2 in)
Dimensions
Height w/ROPS, mm (ft in) 2758 (9 ft 1 in)
Length w/Dozer, mm (ft in) 4393 (14 ft 5 in)
Ground Clearance, mm (in) 391 (15.4)
Capacities
Fuel Tank, L (gal) 237 (62.5)
Hydraulic Reservoir, L (gal) 34 (9)
Weight
SAE Operating Weight, kg (lb) 8890 (19599)

KKomatsu Dozers D39PX-23
D39PXi-23 Crawler Dozer
iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 107 HP 79 kW
ISO 9249 / SAE J1349 - Net 105 HP 78 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.

Minimum turning radius* 87" 2.2 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 6
Type of shoes (standard) Single grouser
Number of shoes (each side) 39
Grouser height 2.1" 53 mm
Shoe width (standard) 20" 510 mm
Ground contact area 3,731 in 24072 cm²
Ground pressure
(with dozer, ROPS cab)
5.64 psi 0.40 kgf/cm² / 38.9 kPa
Track gauge 5'4" 1620 mm
Length of track on ground 7'9" 2360 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 15.8 U.S. gal 60 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,387 lb 8340 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,922 lb 9490 kg
hydraulic system
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.  
Positions:  
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics