Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Oxford, Connecticut

With extensive construction industry expertise, Our vendors are in a position to advise and assist you in finding the best vendors who offer heavy construction equipment rentals in Oxford.

Make us your first choice and you will never have to consider other options each time you need heavy machinery and construction tools and supplies.

Whether you have a long term project at hand or just need to rent excavators, dozers, forklifts, wheel loaders, etc. for a short or long timeframe, you will just pay for what you need for a specific timeframe.

Individuals as well as contractors with small or big equipments, for a day, week or months at a stretch, can dial our toll free number any day to get all kinds of construction equipment on hire. We can also be contacted through the contact-form on the right.

Our teams are always on standby to respond to your queries and concerns at all times.

Equipment Rental Oxford, Construction equipment rental Oxford, Construction rental Oxford, Heavy Equipment Rental Oxford.

Komatsu Wheel Loaders WA380-7
WA380-7 Wheel Loader

The Tier 4 interim WA380-7 will save you 10% on your fuel bill over the previous model. Two engine power modes, power and economy, let the operator match his work mode to the job at hand. The large capacity torque converter with enhanced lock-up gives the WA380-7 terrific digging power in the pile and climbing ability. SmartLoader Logic ensure that the WA380-7 works most efficiently under low demand conditions to ensure further energy and fuel savings.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in3 6.69 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 192 HP 143 kW
ISO 9249/SAE J1349 / Net 191 HP 142 kW
Rated rpm 2100 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Automatic, full-poweshift, counter-shaft type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.1 mph
6.6 km/h
4.4 mph
7.1 km/h
2nd gear 7.3 mph
11.7 km/h
7.7 mph
12.4 km/h
2nd gear (Lock-up clutch ON) 7.7 mph
12.4 km/h
8.3 mph
13.3 km/h
3rd gear 13.0 mph
20.9 km/h
13.9 mph
22.3 km/h
3rd gear (Lock-up clutch ON) 14.0 mph
22.5 km/h
15.0 mph
24.1 km/h
4th gear 22.4 mph
36.1 km/h
24.0 mph
38.6 km/h
4th gear (Lock-up clutch ON) 24.9 mph
40.0 km/h
24.9 mph
40.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 35° (40° to max end stop)
Minimum turning radius at the center of outside tire 20'9" 6320 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 36.2 U.S. gal/min 137 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.0" x 17.4" 75 mm x 442 mm
Loader control:
Hydraulic pump Gear type pump
Capacity at rated rpm 54.13 U.S. gal/min 204.9 ltr/min
Relief valve setting 4,550 psi 31.4 MPa / 320 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Lift cylinder - 2 5.1" x 28.1" 130 mm x 713 mm
Bucket cylinder - 1 5.9" x 21.1" 150 mm x 535 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.9 sec
Dump 1.8 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 14.4 U.S. gal 54.4 ltr
Fuel tank 79.3 U.S. gal 300 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 37.5 U.S. gal 142 ltr
Axle (each front and rear) 10.6 U.S. gal 40 ltr
Torque converter and transmission 14.3 U.S. gal 54 ltr

Articulating Boom Lifts M400AJP

Articulating Boom Lifts M400AJP
Key Specs

  • Machine Width: 5 ft 9 in. / 1.75 m
  • Platform Capacity:  500 lb / 226.80 kg
  • Platform Height: 40 ft / 12.19 m

Key Features

  • Versatility - Three platform heights and jib and non-jib options; three chassis widths to fit any workspace; electric or multi-fuel
  • Accessibility - up and over access, optional jib
  • Maneuverability - move over uneven surfaces with the Automatic Traction Control option
  • Productivity - work longer with longer duty cycles
  • Environmentally friendly - zero emissions
Power Source
Batteries 8 x 6V, 370 amp-hr
Electrical System 48 Volts DC
Generator / Engine - Brand Kubota
Generator / Engine - Fuel Tank Capacity 4 gal. / 15.14 L
Generator / Engine - Fuel Type Diesel
Generator / Engine - Horsepower / Kilowatts 7 hp / 5 kW
Performance
Drive Speed - Platform Lowered 3 mph / 5.15 km/h
Gradeability - 2WD 30 %
Platform Capacity 500 lb / 226.80 kg
Swing 360 Degrees
Swing Type Non-Continuous
Turning Radius - Outside 10 ft 4 in. / 3.15 m
Dimensional Data
Ground Clearance 9 in. / 0.22 m
Machine Height 6 ft 7 in. / 2.01 m
Machine Length 22 ft / 6.71 m
Machine Width 5 ft 9 in. / 1.75 m
Platform Dimension A 2 ft 6 in. / 0.76 m
Platform Dimension B 5 ft / 1.52 m
Platform Height 40 ft / 12.19 m
Tailswing Zero
Tire Size 240/55-17.5 Pnuematic)
Wheelbase 6 ft 7 in. / 2.01 m
Reach Specifications
Horizontal Jib Rotation 180 Degrees
Horizontal Outreach 22 ft 5 in. / 6.83 m
Platform Height 40 ft / 12.19 m
Up and Over Height 21 ft 6 in. / 6.55 m
Vertical Jib Rotation 144 Degrees
General
Capacity - Hydraulic Reservoir 4 gal. / 15.14 L
Machine Weight 14000 lb / 6350.29 kg

Mast Boom Lifts T20E

Mast Boom Lifts T20E

Key Specs

  • Machine Width: 3 ft 3 in. / 0.99 m
  • Platform Capacity: 500 lb / 226.80 kg
  • Platform Height: 20 ft 2 in. / 6.15 m

Key Features

  • Vertical telescopic mast with a jib lets you reach up and over obstacles in tighter spaces than an articulating boom
  • Non-marking tires and efficient electric power for indoor jobs
  • 25% gradeability for outside work
Power Source
Batteries 225 amp-hr
Electrical System 24 Volts DC
performance
Drive Speed - Platform Lowered 3 mph / 5.47 km/h
Gradeability - 2WD 25 %
Platform Capacity Platform Capacity
Platform Capacity - Unrestricted 500 lb / 226.80 kg
Swing 360 Degrees
Swing Type Non-Continuous
Turning Radius - Outside 5 ft 9 in. / 1.75 m
dimensional data
Ground Clearance 3 in. / 0.08 m
Machine Height 6 ft 7 in. / 2.01 m
Machine Length 6 ft 11 in. / 2.11 m
Machine Width 3 ft 3 in. / 0.99 m
Platform Dimension A 2 ft 9 in. / 0.84 m
Platform Dimension B 2 ft 11 in. / 0.88 m
Platform Height 20 ft 2 in. / 6.15 m
Tailswing 7 in. / 0.18 m
Tire Size 16 x 5 x 10.5 noon-marking
Wheelbase 3 ft 11 in. / 1.19 m
reach specifications
Horizontal Jib Rotation 0 Degrees
Horizontal Outreach 6 ft 7 in. / 2 m
Platform Height 20 ft 2 in. / 6.15 m
Up and Over Height 16 ft 9 in. / 5.1 m
Vertical Jib Rotation 125 Degrees
general
Capacity - Hydraulic Reservoir 5 gal. / 20.06 L
Machine Weight 5360 lb / 2431.26 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics