Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Felton, Delaware

Seasoned contractors and experienced professionals in the construction industry are well aware of the fact that heavy construction equipment on rent offers much higher dollar value. With us, you can find vendors who offer fixed rental service.

Contractors looking for heavy construction equipment rentals in Felton can contact us any time and since we’ve a large network of vendors, rest assured, all of your requirements, even if communicated on short notice, would be met.

The payments you make as rental fee for the construction equipment or supplies you use for a given period of time remain fixed throughout the cycle. Interest rates are subject to fluctuations but not in case of a rental model. So, you can plan your budget well and leave the task of arranging necessary equipment at the jobsite to our vendors.

Dial our toll free number to know more or submit the contact form on the right.

Equipment Rental Felton, Construction equipment rental Felton, Construction rental Felton, Heavy Equipment Rental Felton.

Unable to parse entered address. API response code: REQUEST_DENIED

John Deere Articulated Dump Trucks 460E
What's the big idea behind our biggest ADTs?

Need maximum productivity for a mining, quarry, or aggregate application? Then let us introduce you to our biggest ADT - the 460E. Boasting bigger dump bodies and even faster cycle times, E-Series ADTs deliver big-time productivity. So you'll haul more material at lower cost per ton than comparable-size trucks. The 460E employs a heavy-duty fabricated frame and high-alloy steel dump body, ensuring best-in-class payload-to-weight ratios. It also comes loaded with a John Deere EPA Interim Tier 4 (IT4) diesel engines. Purpose-built transmissions with eight forward and four reverse gears. Heavy-duty John Deere-built axles with wet-disc brakes. Standard adaptive suspension.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech 6135
Net Power, kW (hp) @ Rated rpm 359 (481) @ 1900
Displacement, L (cu in) 13.5 (824)
Calculated Torque Rise (percentage) --
Transmission
Transmission Manufacturer ZF
Transmission Type Powershift
Number of Gears Forward and Reverse 8F - 4R
Max. Travel Speed - fwd, kph (mph) 55 (34)
Max. Travel Speed - rev, kph (mph) 17 (11)
Axles
Type Planetary - Outboard
Axle Diff. Lock Transverse Cross-axle Diff Lock
Brakes
Service Brake Type Wet Multi Disc
Engine Brake Transmission
Retarder Other Type Hydraulic - Transmission
Parking Brake Type Spring Applied / Hydraulically Released
Suspension
Front Type A-Frame
Front Suspension Nitrogen/Oil-Filled Struts - Auto Levelling
Rear Type Pivoting Walking Beam
Rear Suspension Rubber Suspension Blocks
Load Body
Construction Standard
Body Tipping Angle Degrees 70
Body Tipping Time to Raise seconds 13
Body Tipping Time to Lower seconds 7
Tip Cylinders Type Twin 1-Stage
Power Down Yes
Steering & Articulation
Articulation Angle, degrees 45
Steering Turns Lock to Lock 4.2
Secondary Steering Type Yes
Dimension
Overall Length, mm (ft in) 10810 (35 ft 6 in)
Overall Tire Width, mm (ft in) 3410 (11 ft 2 in)
Overall Height, mm (ft in) 3860 (12 ft 8 in)
Loadover Height, mm (ft in) 3470 (11 ft 5 in)
Approach Angle degrees 26
Outside Turning Radius, mm (ft in) 8900 (29 ft 2 in)
Inside Turning Radius, mm (ft in) 4630 (15 ft 2 in)
Cab
Steering Wheel Adjustment description Fully Adjustable
Air Conditioner Yes
Tires
Standard 29.5 R25
Capacities
Fuel Tank, L (gal) 609 (161)
Hydraulic Reservoir, L (gal) 242 (64)
Payload
Capacity Struck, cu m (cu yd) 20.6 (26.9)
Capacity Heaped SAE 2:1, cu m (cu yd) 25.5 (33.4)
Weight
Operating Weight Empty, kg (lb) 32216 (71024)
Payload Weight, kg (lb) 41820 (92197)
Gross Weight, kg (lb) 74036 (163221)
Gross Weight, kg (lb) 74036 (163221)

Tow-Pro® Boom Lift T350

JLG Tow-Pro® Boom Lift T350
Key Specs

  • Horizontal Outreach: 18 ft 8 in. / 5.69 m
  • Platform Capacity - Unrestricted: 500 lb / 226.80 kg
  • Platform Height: 35 ft / 10.67 m

Key Features

  • Gasoline engine or 24V DC electric power
  • Standard air and water lines to platform
  • Accessory Mounting Tray accommodates your generator, air compressor or pressure washer
Power Source
Batteries 4 x 6V 220 amp-hr
General
Capacity - Hydraulic Reservoir 4 gal. / 15.14 L
Ground Bearing Pressure 23 psi / 1.61 Kg/cm2
Machine Weight 3400 lb / 1542.21 kg
Performance
Frame Leveling 11 Degrees
Leveling Capability 11 Degrees
Outriggers or Stabilizers Yes
Platform Capacity 500 lb / 226.80 kg
Swing 410 Degrees
Swing Type Non-Continuous
Towing Speed Rating 65 mph / 104.61 km/h
Dimensional Data
Ground Clearance 1 ft 2 in. / 0.36 m
Ground Entry Height 10 in. / 0.25 m
Machine Height 6 ft 6 in. / 1.98 m
Machine Length 21 ft 9 in. / 6.63 m
Machine Width 4 ft 9 in. / 1.45 m
Outrigger Footprint Length 11 ft 7 in. / 3.53 m
Outrigger Footprint Width 10 ft 5 in. / 3.18 m
Platform Dimension A 2 ft 6 in. / 0.76 m
Platform Dimension B 4 ft / 1.22 m
Platform Height 35 ft / 10.67 m
Tire Size 205/75 R14 Pnuematic
Reach Specifications
Horizontal Outreach 18 ft 8 in. / 5.69 m
Platform Height 35 ft / 10.67 m
Up and Over Height 15 ft / 4.57 m
Vertical Jib Rotation 0 Degrees

Vertical Jib Rotation144 Degrees

Komatsu Trucks 960E-2

960E-2 Electric Drive Truck

The 3,500 hp Ultra class 960E-2 has the capacity to carry 280 yd3 or 360 tons of material. The AC electric drive system coupled with spin-slide traction control, and 6,000 hp retarding system give the operator the control he needs to maximize the production of this behemoth. The hydropneumatic suspension system helps to keep material in the bed for more production and cleaner haul roads and also give the operator and drive train a softer, more comfortable ride. These trucks have put in millions of hours in mines around the world because of its rugged design which, like all Komatsu trucks and products, use castings in the high stress areas.

Engine
Make and model* Komatsu SSDA18V170
Fuel Diesel
Number of cylinders 18
Operating cycle 4 cycle
Gross horsepower** @ 1900 rpm 3,500 HP 2610 kW
Net flywheel power*** @ 1900 rpm 3,346 HP 2495 kW
Weight (wet) 25,897 lb 11750 kg
Weight (dry) 24,795 lb 11250 kg
*Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America.
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC CURRENT
Alternator GTA-39
Dual impeller in-line blower 12,000 cfm 340 m³/min
Control AC Torque Control System
Motorized wheels* GDY108 Induction Traction Motors
Ratio 32.62:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, radial tires
Standard tire* 56/80 R63
Flange mount rim:
Rim assembly 41'' x 63'' x 5.5'' 1041 mm x 1600 mm x 140 mm
Rims rated at 758 kPa /110 psi cold inflation pressure
Typical tire weight 65,154 lb 29553 kg
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Eyebrow, rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.63'' 16 mm
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.75'' 19 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.39' 10 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.47'' 12 mm
Side sheet
200,000 psi / 1379 mPa tensile strength steel
0.39' 10 mm
Canopy sheet
100,000 psi / 690 mPa tensile strength steel
0.24'' 6 mm
Struck 195 yd3 149 m3
Standard SAE heaped 2:1 280 yd3 214 m3
Standard Komatsu body weight 90,000 lb 40823 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab, adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted safety glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant)
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material
tensile strength steel
70,000 psi 482.6 mPa
Casting material
tensile strength steel
90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.77'' 45 mm
Side plate thickness / Rear 0.98'' 25 mm
Side plate thickness / Front 1.26'' 32 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
Service brakes: oil-cooled, hydraulic-actuated, multiple disc brakes at each wheel. Traction system wheel spin-slide control.
Max. service apply pressure 2750 psi 18960 kPa
Total friction area per brake 16,078 in2 103729 cm2
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch activated
Parking brakes Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on 15% grade at maximum gross vehicle weight.
Electric dynamic retarder / Continuous 6000 hp 4476 kW
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.92'' 328 mm
Max. rear stroke 9.40'' 239 mm
Max. rear axle oscillation 6.5°
Cooling System
L&M radiator assembly, split-flow, with deareation-type top tank.
Radiator frontal area 75.5 ft² 7.02 m²
Service Capacities
Cooling System 190 U.S. gal 719 L
Crankcase* 90 U.S. gal 341 L
Hydraulic system 350 U.S. gal 1325 L
Motor gear box (each) 25 U.S. gal 95 L
Fuel 1400 U.S. gal 5300 L
*Includes lube oil filters
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 105'' 32 m
Reservoir 250 U.S. gal 947 L
Filtration In-line replaceable elements
Suction Single, full flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 24 sec
Power-down 14 sec
Float-down empty 28 sec
Pumps Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 931 lpm / 246 gpm at 1900 rpm and 18960 kPa / 2750 psi
Steering and brake Pressure-compensating piston pump with output of 246 lpm / 65 gpm at 1900 rpm and 20685 kPa / 3,000 psi
System relief pressures:
Hoist and brake cooling 2,500 psi 17237 kPa
Steering and brake 3,000 psi 20685 kPa
Quick disconnects standard for powering disabled truck and for systems diagnostics.
Electrical System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24 volt, 250 amp
Lighting 24 volt
Cranking motors Two/24 volt
Weight Distribution
Empty vehicle weight:
Front Axle Distribution / 49.5% 272,250 lbs 123490 kg
Rear Axle Distribution / 50.5% 277,750 lbs 125985 kg
Total EVW 550,000 lbs 249475 kg
Gross vehicle weight:
Front Axle Distribution / 33% 419,100 lbs 190104 kg
Rear Axle Distribution / 67% 850,900 lbs 385968 kg
Nominal GVW 1,270,000 lbs 576072 kg
Nominal Payload 720,000 lbs (360 short tons) 326585 kg (327 metric tons )
Nominal payload is defined by Komatsu America Corp's payload policy documentation. In general, the nominal payload must be adjusted for the specific vehicle configuration and site application. The figures above are provided for basic product description purposes
Please contact your Komatsu distributor for specific application requirements.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics