Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Seaford, Delaware

Seasoned contractors and experienced professionals in the construction industry are well aware of the fact that heavy construction equipment on rent offers much higher dollar value. With us, you can find vendors who offer fixed rental service.

Contractors looking for heavy construction equipment rentals in Seaford can contact us any time and since we’ve a large network of vendors, rest assured, all of your requirements, even if communicated on short notice, would be met.

The payments you make as rental fee for the construction equipment or supplies you use for a given period of time remain fixed throughout the cycle. Interest rates are subject to fluctuations but not in case of a rental model. So, you can plan your budget well and leave the task of arranging necessary equipment at the jobsite to our vendors.

Dial our toll free number to know more or submit the contact form on the right.

Equipment Rental Seaford, Construction equipment rental Seaford, Construction rental Seaford, Heavy Equipment Rental Seaford.

New Holland Compact Track Loaders C227

Compact Track Loaders C227

MORE DIGGING AND PUSHING POWER BY DESIGN
New Holland Compact Track Loader model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model FPT / F5H FL463A
Bore/stroke, in (mm) 3.9 x 4.3 (99 x 109)
Displacement, in3 (L) 207 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged with external EGR
Horsepower per SAE J1349 Gross hp (kW) 74 (55) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW) 68 (51) @ 2500 rpm
Peak torque, lb-ft (Nm) 223 (314) @ 1400 rpm
Power Train
Travel speed, low range, mph (km/h) 5.1 (8.2)
Travel speed, high range (optional),mph (km/h) 7.6 (12.2)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 123 (3124)
Top of ROPS, in (mm) 78.7 (1998)
Bottom of level bucket, fully raised,in (mm) 116.1 (2950)
Overall length without attachment with coupler, in (mm) 105.1 (2669)
Dump angle, degrees 40
Dump reach (max height), in (mm) 22.3 (568)
Rollback, bucket on ground,degrees 31
Rollback, bucket at full height, degrees 99
Track on ground, in (mm) 55.9 (1419)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 32
Clearance circle without bucket, in (mm) 50.7 (1289)
Clearance circle rear, in (mm) 62.9 (1599)
Overall width, in (mm) 65.9 (1676)
Ground pressure, PSI (with spec belt) 5,9
Hydraulic System
Pump flow, gpm (Lpm) 24.2 (91.5)
Optional high flow, gpm (Lpm) 32.4 (122.6)
Relief pressure, psi (bar) 3046 (210)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2700 (1225)
Rated operating load, 35% tip, lbs (kg) 1890 (860)
Tipping load, lbs (kg) 5400 (2449)
Breakout force, lift cylinder, lbs (kN) 6080 (27)
Breakout force, bucket cylinder, lbs (kN) 7270 (32.3)
Operating weight, lbs (kg) 8270 (3750)

JCB Telescopic Handler 531-70
531-70
The JCB 531-70 Loadall is the smallest of our full-sized telescopic handler machines. It's a hugely efficient Dieselmax-powered Loadall sitting on a chassis that's designed for load-bearing and stability.

The side-mounted JCB engine combines with JCB axles and transmission to ensure a reliable drivetrain performance from well-proven telescopic loader components.

This JCB telescopic handler also has instant steering selection between three modes for easy operation, a tight turn radius and great maneuverability.

Engine
Maximum Engine Power
Operating Weight
Fuel Tank Capacity 38.5gallons (146litres)
Overall Height 8' 2" (2,490mm)
Overall Width 7' 4" (2,230mm)
Lift Performance
Maximum Lift Capacity
Maximum Lift Height 22' 11" (7m)
Maximum Forward Reach 12' 2 (3.84m)

JCB Telescopic Handler 531-70T
531-70T
The JCB 531-70 Loadall is the smallest of our full-sized telescopic handler machines. It's a hugely efficient Dieselmax-powered Loadall sitting on a chassis that's designed for load-bearing and stability.

The side-mounted JCB engine combines with JCB axles and transmission to ensure a reliable drivetrain performance from well-proven telescopic loader components.

This telescopic handler also has instant steering selection between three modes for easy operation, a tight turn radius and great maneuverability.

Lift Performance
Maximum Lift Capacity
Maximum Lift Height 22' 11" (7m)
Maximum Forward Reach 12' 2 (3.84m)
Engine
Maximum Engine Power

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics