Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Anthony, Florida

In terms of convenience ease & flexibility, access to the latest technology, taxes, maintenance options and numerous other factors including an ever growing cost of ownership, construction equipment rental in Anthony is a better option than having to buy heavy machinery or other construction equipment.

If you are looking for vendors who can supply you with necessary heavy construction equipment for a limited period of time in Anthony, you've landed on the right platform. It’s a network of some of the most credible and well established vendors in the region. Whatever your equipment needs be, you will have no trouble finding the right vendor with our assistance.

Getting started is easy. Just dial the toll free number or fill up the contact form on the right.

Once you learn about your requirements, we will put you in touch with the right vendor in as little as one day!

Equipment Rental Anthony, Construction equipment rental Anthony, Construction rental Anthony, Heavy Equipment Anthony.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Trucks 730E-8

730E-8 Electric Drive Truck

The 203 ton capacity 730E-8 is a very versatile electric drive truck that features 1,860 flywheel horsepower. The cab has an integral ROPS, air ride seat, dynamic retarding and power steering with auto emergency steering to make the operator comfortable and more productive. To make the 730E more productive, a trolley assist option is available for circumstances where an overhead electrified trolley system can be used.

Engine
Make and model* Komatsu SSDA16V159
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
Gross horsepower** @ 1900 rpm 2,000 HP 1492 kW
Net flywheel power*** @ 1900 rpm 1,884 HP 1405 kW
* Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America.
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC current
Alternator GTA-49
Dual impeller in-line blower 13,900 cfm 393 m³/min
Control AC Torque Control System
Motorized wheels* GEB35 Induction Traction Motors
Ratio 30.8:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, tires
Standard tire* 37.00 R57
Flange mount rim 686 mm x 1448 mm x 152 mm 27'' x 57'' x 6'' rim assembly. Rims rated at 758 kPa 110 psi cold inflation pressure.
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Eyebrow, rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet - Outer (1379 MPa 200,000 psi tensile strength steel) 0.63'' 16 mm
Floor sheet - Center (1379 MPa 200,000 psi tensile strength steel) 0.75'' 19 mm
Front sheet (1379 MPa 200,000 psi tensile strength steel) 0.39'' 10 mm
Side sheet (1379 MPa 200,000 psi tensile strength steel) 0.31'' 8 mm
Canopy sheet (690 MPa 100,000 psi tensile strength steel) 0.24'' 6 mm
Capacity struck 153 yd³ 117 m³
SAE heaped 2:1 193 yd³ 148 m³
Standard Komatsu body weight 62,100 lb 28169 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab, adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material 70,000 psi 482.6 mPa tensile strength steel
Casting material 90,000 psi 620.5 mPa tensile strength steel
Rail width 11.02'' 280 mm
Rail depth (minimum) 31.38'' 797 mm
Top and bottom plate thickness 1.26'' 32 mm
Side plate thickness 0.75'' 19 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
System meets ISO 3450/1996.
Service brakes: all-hydraulic actuated.
Front: Wheel speed disc. Three calipers on a 1213 mm / 47.75" O.D. disc
Rear Dual disc armature speed. Two 635 mm / 25" O.D. discs per side. One caliper per disc.
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch-activated
Parking brakes Spring-applied, hydraulically released, with speed application protection.
Electric dynamic retarder (max.) 3,200 hp / 2387 kW Continuously rated high-density blown grids w/retard at engine idle and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.28'' 312 mm
Max. rear stroke 10.98'' 279 mm
Max. rear axle oscillation ±5.3°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank
Radiator frontal area 50.1 ft² 4.65 m²
Service Capacities
Cooling system 117 U.S. gal 441 L
Crankcase* 59 U.S. gal 223 L
Hydraulic system 210 U.S. gal 795 L
Motor gear box (each) 10 U.S. gal 38 L
Fuel 800 U.S. gal 3028 L
*Includes lube oil filters
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 89' 27.2 m
Reservoir 135 U.S. gal 511 L
Filtration In-line replaceable elements
Suction Single, full-flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 19 sec
Power-down 10.5 sec
Float--down empty 12 sec
Pumps: Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 666 lpm 176 gpm at 1900 rpm and 18961 kPa 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 254 lpm 67 gpm at 1900 rpm and 19134 kPa 2,775 psi
System relief pressures:
Hoist 2,500 psi 17237 kPa
Steering and brake 4,000 psi 27580 kPa
Electric System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24-volt 250 amp
Lighting 24 volt
Cranking motors Two/24 volt

John Deere Excavators 75G
Swing for the fences without hitting them.

Sporting the same no-compromise hydraulic-management system and exceptionally smooth controls our excavators are known for, the 75G will put your operators at the top of their game. Pinpoint metering combined with reduced tail swing take the worry out of working close. What's more, two power modes and an available control-pattern selector easily adapt to changing job demands. Operators will also appreciate the comfortable fabric-covered adjustable suspension seat and ample legroom in the spacious, well-appointed cab. As always, unsurpassed all-round visibility, low-effort joysticks, a highly efficient HVAC system, and numerous other amenities provide everything your operators need to do their best work. And keep them comfortably on task and ahead of schedule.

And the durable EPA Final Tier 4/EU Stage IV diesel meets rigid emission regulations, so you can put it to work, everywhere there's work, including non attainment areas.

Engine
Emission Rating Tier 4
Engine Make / Engine Model Yanmar / 4 TNV 98
Net Power, kW (hp) @ Rated rpm 42.5 (56.9) @ 2000
Displacement, L (cu in) 3.3 (202)
HYDRAULIC SYSTEM
Pump Type Variable axial piston
Total Pump Flow, L/m (gpm) 144 (38)
Normal Relief Pressure, kPa (psi) 26000 (3771)
Boost Relief Pressure, kPa (psi) not published
UNDERCARRIAGE
Track Gauge, mm (in) 1870 (6 ft 2 in)
Overall Track Length, mm (ft) 2920 (9 ft 7 in)
Sprocket to Idler Centerline, mm (ft) 2290 (7 ft 6 in)
Width Over Std Track, mm (ft) 2320 (7 ft 7 in)
No. of Lower Rollers/Side 5
No. of Carrier Rollers/Side 1
Ground Clearance, mm (in) 360 (14)
Standard Track Pad, mm (in) 600 (24)
Ground Pressure - Std. Pad, kPa (psi) 27 (3.9)
Max. Travel Speed - fwd, kph (mph) 5 (3.1)
Gradeability, % 70
Gradeability, deg 35
Max. Drawbar pull, kN (lbf) 65.2 (14661)
ARM LENGTH
Reference Arm, mm (ft in) 2120 (7 ft )
PERFOrMANCE
Max. Reach @ G.L., mm (ft in) 6760 (22 ft 2 in)
Max. Dig Depth, mm (ft in) 4610 (15 ft 2 in)
Dig Depth-8' Flat Bottom, mm (ft in) 4320 (14 ft 2 in)
Dig Depth Vertical Wall, mm (ft in) 4220 (13 ft 10 in)
Max. Dump Height, mm (ft in) 5510 (18 ft 1 in)
Lift Cap. Over Front @ 25' G.L. (incl bkt), kg (lbs) not published
Lift Cap. Over Side @ 25' G.L. (incl bkt), kg (lbs) not published
Max Arm Digging Force, kN (lbf) 30.7 (6902)
Max Bucket Digging Force, kN (lbf) 46.6 (10476)
Tail Swing Radius, mm (ft) 1290 (4 ft 3 in)
Swing Speed, rpm 10.5
Max. Swing Torque, kNm (lbf - ft) 16.6 (12244)
TRASPORT SPECIFICATIONS
Transport Length, mm (ft in) 6370 (20 ft 11 in)
Transport Height, mm (ft in) 2690 (8 ft 10 in)
Transport Width, mm (ft/in) 2470 (8 ft 1 in)
CAPACITIES
Fuel Tank, L (gal) 135 (35.7)
Hydraulic Reservoir, L (gal) 56 (15)
WEIGHT
SAE Operating Weight, kg (lb) 8265 (18221)

If you own a construction company, run a warehouse or have a goods transport business in Paradise Valley, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.

But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.

But, finding reliable Excavator rentals in Paradise Valley isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Paradise Valley.

This is where HeavyRentals.Equipment can help.

Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Paradise Valley as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Paradise Valley against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.

As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Paradise Valley you wish to choose.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics