Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Bagdad, Florida

In terms of convenience ease & flexibility, access to the latest technology, taxes, maintenance options and numerous other factors including an ever growing cost of ownership, construction equipment rental in Bagdad is a better option than having to buy heavy machinery or other construction equipment.

If you are looking for vendors who can supply you with necessary heavy construction equipment for a limited period of time in Bagdad, you've landed on the right platform. It’s a network of some of the most credible and well established vendors in the region. Whatever your equipment needs be, you will have no trouble finding the right vendor with our assistance.

Getting started is easy. Just dial the toll free number or fill up the contact form on the right.

Once you learn about your requirements, we will put you in touch with the right vendor in as little as one day!

Equipment Rental Bagdad, Construction equipment rental Bagdad, Construction rental Bagdad, Heavy Equipment Bagdad.

Toyota forklift 8FGC55U

8-Series Large Capacity-8FGC55U

Cushion Tire

  • 8-Series Large Capacity
  • 8,000-15,500 lb. Lifting Capacity
  • Gas/LPG

Once again, Toyota innovation and engineering come together to set a new standard in the forklift industry. Toyota's highly anticipated line of 8-Series large capacity forklifts were designed like a sumo wrestler,with the essence of being stable and powerful. Toyota engineers used inventive design changes to make the truck more productive and efficient. By reducing emissions and fuel consumption they've created a forklift that leads the industry in environmental performance.

ERGONOMICS
  • 11.8 diameter two spoke steering wheel provides greater legroom for operator
  • Cowl-mounted hydraulic levers are ergonomically situated for improved operator comfort and unobstructed entry and exit from the right side of the truck
  • 12-inch long dual operator assist grips have been designed to meet the needs of varying operator sizes
  • Low profile front cowl results in enhanced forward visibility and lessens back pain by reducing the need of the operator to lean forward to view load and for tips
PERFORMANCE
  • Toyota's 3.7-liter, 4-cylinder LPG engine is very capable of exceeding the performance demands of the harshest environments by providing the same power as a V6 with improved fuel economy.
  • While increasing power, it reduces fuel consumption up to 20 % compared with previous Toyota models.
  • Diesel engine based cylinder block provides thicker walls to increase durability
  • Distributorless ignition system provides greater reliability.
EASE OF SERVICE
  • Easy-lift hood with automatic assist damper to provide quick and easy access to engine
  • No-tool floorboard removes in seconds for quicker servicing
  • Brake fluid level check is conveniently mounted on the cowl for quick reference to expedite routine maintenance
SAFETY
  • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tip overs
  • When it senses instability, the Active Control Rear Stabilizer locks the rear axle to help prevent lateral tip overs
  • Active Mast Function Controller senses and controls mast angle and rear tilt speed according to the load's height and weight
DURABILITY
  • Control Area Network (CAN-bus) communication provides quicker, more reliable control of the truck functions with fewer components.
  • Fully stamped steel side panels are thick to help withstand the harshest environments
  • Moisture-resistant electrical connections are less susceptible to water intrusion and corrosion caused from pressure washing and high moisture environments.
  • Stamped steel engine hood provides maximum durability
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.)
8FGC55U 12,000 84/2350 13.0 91 34 118

Toyota Forklifts 7FBH25

7-Series Electric Forklift-7FBH25

AC Pneumatic

  • 3,000-7,000 lb. Lifting Capacity

Toyota innovation and engineering come together to create a revolution in the electric forklift industry. The Toyota 7FB is the world's first electric forklift to combine the benefits of AC power with Toyota's exclusive System of Active StabilityTM (SAS). This system actually senses and counteracts instability to help reduce the risk of forklift tipovers. SAS combines with Toyota's reputation for quality, durability and dependability to raise standards for forklift safety and productivity.

ERGONOMICS
  • Cowl-mounted hydraulic controls allow for comfortable, "eyes forward" operation
  • Spacious operator compartment with wider foot area helps reduce operator fatigue
  • Low step height lets operators enter and exit easily and comfortably
PeRFORMANCE
  • The 7FB is designed to help extend battery life, reducing operating costs and maximizing up-time
  • Three forms of regenerative braking help operators come to complete, confident stops: foot, coast and plug braking.
  • Optimal maximum travel speed can be set for optimal performance as well as safety while training new employees
EASE OF SERVICE
  • Integrated monitoring system for quicker, easier servicing
  • An automatic shut off is activated after 15 minutes to extend battery life
  • A built in analyzer and self diagnostics make the 7FB easier to maintain
  • AC Motors have no brushes, springs, commutator or wearable parts to service and replace, resulting in fewer, quicker and less expensive maintenance needs.
SAFETY
  • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tipovers
  • When it senses instability, the Active Control Rear Stabilizer locks the rear axle to help prevent lateral tipovers
  • Active Mast Function Controller senses and controls mast angle and rear tilt speed according to the load's height and weight
DURABILITY
  • SAS Automatic Fork Leveling Control levels forks with the ground for easier pallet retrieval
  • Wide-view mast offers an unparalleled view of the forks in any position
  • Tight-turning radius increases maneuverability in small areas
SPECIFICATION CHART
Model Load Capacity* (lbs.) Voltage (V) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Gradeability Full Load 3 Minute Rating(%) Basic Right Angle Stack* (in.) Turning Radius Overall Truck Dimensions (in.)
Length Width Height
7FBH25 5,000 48 8.7 67 16 95.7 78.7 90.2 46.1 83.7

Toyota Forklifts 8TB50

Electric Motor Forklift-8TB50

Tow Tractor

  • 10,000 lbs. Tow Capacity

Featuring AC drive system technology, Toyota offers a wide range of 24-volt, electric pallet jacks to meet your productivity needs. Industry-leading levels of performance and reliability can be found in all of our walkie pallet, end-control walkie/rider, center control rider and tow tractor units. Attention to operator efficiencies and ease of service put overall equipment value to work for you.

ERGONOMICS
  • Multi-function control handle has ergonomically positioned dual thumb wheels with twist grips and horn buttons for simplified operation of all controls with either hand.
  • High-speed interlock allows the operator to maintain top travel speed without continuously pressing a button for long distance transport, increasing freedom of movement.
  • Low-platform step height eases frequent entry and exit during floor level order-picking for reduced body fatigue.
  • Polyurethane torsion block casters act as shock absorbers to improve operator ride comfort.
  • Rubber drive tire and polyurethane load wheels provide a smoother ride and longer tire life.
PERFORMANCE
  • AC drive system offers fast response to operating commands, precise power control, compact components and provides high productivity throughout the entire shift.
  • AC drive motor offers excellent acceleration and top travel speed, loaded or unloaded, while improving battery efficiency through regenerative braking.
  • Regenerative braking improves overall efficiency and prolongs brake component life.
  • Programmable performance parameters may be customized through the digital display to meet a wide range of job applications and operator skill levels.
  • Polyurethane torsion block casters improve cornering under all conditions, optimizing stability and load handling.
  • Hitch designed to handle carts and trailers of various sizes and construction for ultimate versatility.
EASE OF SERVICE
  • AC drive motors have no springs, brushes, commutator or wearable parts to help reduce planned maintenance.
  • One-piece, lightweight service access cover conveniently snaps on and off for easy access to major components reducing service time during inspection.
  • Steel reinforced control handle is impact-resistant and easy to service by simply removing four screws.
  • On-board self-diagnostics with built-in analyzer simplifies troubleshooting and eliminates the need for an external hand-held analyzer.
  • AC drive system eliminates the need for the directional contactors to help reduce routine maintenance and inspection time.
  • Drive tire replacement is simplified by removing only five bolts to maximize uptime and productivity.
DURABILITY
  • One-piece, high-strength service cover protects the electrical, hydraulic and mechanical components against damage.
  • Controller Area Network (CAN-bus) communication technology provides precise, fast and reliable control of all truck functions with fewer electrical components.
  • Welded construction with steel gussets strengthens the tractor bumper to help protect critical components against impact, increasing equipment life.
  • Powder coat paint finish provides added durability against paint flaking or chipping upon impact.
  • Steel bulkhead wrappers protect vital system components and increase product life.
  • Polymer service cover will not bend, dent, fade, or rust and helps protect all internal system components against damage.
  • Hall-effect switches eliminate wear components and require no mechanical adjustments resulting in increased component life.
  • Thermal protection and current limiting circuitry protects internal components from damage.
  • Durable aluminum cover helps protect the control handle and vital electronic components.
SPECIFICATION CHART
Model Load Capacity**(lbs.) Voltage (V) Maximum Travel Speed Full Load (m.p.h.) Right Angle Stack 48-inch forks 40-inch wide pallet
8TB50 10,000(1) 24 5.8

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics