Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Ferndale, Florida

In terms of convenience ease & flexibility, access to the latest technology, taxes, maintenance options and numerous other factors including an ever growing cost of ownership, construction equipment rental in Ferndale is a better option than having to buy heavy machinery or other construction equipment.

If you are looking for vendors who can supply you with necessary heavy construction equipment for a limited period of time in Ferndale, you've landed on the right platform. It’s a network of some of the most credible and well established vendors in the region. Whatever your equipment needs be, you will have no trouble finding the right vendor with our assistance.

Getting started is easy. Just dial the toll free number or fill up the contact form on the right.

Once you learn about your requirements, we will put you in touch with the right vendor in as little as one day!

Equipment Rental Ferndale, Construction equipment rental Ferndale, Construction rental Ferndale, Heavy Equipment Ferndale.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Excavators PC1250LC-8
PC1250LC-8 Hydraulic Excavator

The PC1250LC-8 is designed to balance the power needed to dig hard dense material like coral while also being able to load out mass quantities of material like topsoil. Power, economy, heavy lift and swing priority work modes allow the operator to operate his machine in the most efficient manner for his current work. Two boom mode settings and shockless boom control make operation smoother and more productive.

Engine
Model Komatsu SAA6D170E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 6.69" 170 mm
Stroke 6.69" 170 mm
Piston displacement 1,413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 (Gross) 688 HP 514 kW
ISO 9249 / SAE J1349 - Net 672 HP 502 kW
Hydraulic fan at maximum speed (Net) 620 HP 463 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic, variable speed, reversible
EPA Tier 3 and EU stage 3A emission certified.
Hydraulics System
Type Open-center load sensing system
Number of selectable working modes 2
Main pump:
Type Variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow
For implement and travel 2 x 130.5 U.S. gpm 2 x 494 ltr/min
For swing 1 x 158.5 U.S. gpm 1 x 600 ltr/min
Sub-pump for control circuit Gear pump
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 3,910 psi 27.0 MPa 275 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders:
Cylinder / Number of cylinders Bore x Stroke Bore x Stroke
Backhoe
Boom / 2 8.9" x 94.1" 225 mm x 2390 mm
Arm / 1 9.8" x 95.9" 250 mm x 2435 mm
Bucket:
Std / 2 6.3" x 71.8" 160 mm x 1825 mm
SP / 2 6.3" x 76.8" 160 mm x 1950 mm
Swing System
Driven method 2 x Hydraulic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 5.5 rpm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 154,320 lb 686 kN 70000 kg
Gradeability 70%
Maximum travel speed:
High 2.0 mph 3.2 km/h
Low 1.3 mph 2.1 km/h
Service brake Hydraulic lock
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes:
Standard, SP, Shovel 48 each side
LC 55 each side
No. of carrier rollers 3 each side
No. of track rollers:
Standard, SP, Shovel 8 each side
LC 10 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 359.3 US gal 1360 ltr
Radiator 37.5 US gal 142 ltr
Engine 22.7 US gal 86 ltr
Final drive, each side 5.5 US gal 21 ltr
Swing drive 2 x 6.4 US gal 2 x 24.3 ltr
Hydraulic tank 177.0 US gal 670 ltr
PTO 3.6 US gal 13.5 ltr

Komatsu Excavators PC490LC-11
PC490LC-11 Hydraulic Excavator

The PC490LC-11 with an operating weight of 105,670 lbs (47,930 kg) to 110,220 lbs (49,995 kg), is a large performance oriented excavator with reinforced undercarriage for high lift capacity, lateral stability and added durability. The PC490LC-11 leverages Komatsu engine technology to provide a productive, dependable and efficient Tier 4 Final emissions certified machine that does not interfere with daily operation. An enhanced Power Mode provides improved hydraulic flow, reduced cycle time and better productivity than the previous model it replaces. The PC490LC-11 is ideally sized for high production earthmoving applications while be easily transportable.

Engine
Model Komatsu SAA6D125E-7*
Type Water-cooled, 4-cycle, direct injection
Aspiration Komatsu Variable Geometry Turbocharger with air-to-air aftercooled EGR
Number of cylinders 6
Bore 125 mm 4.92"
Stroke 150 mm 5.91"
Piston displacement 11.04 ltr 674 in³
Horsepower
SAE J1995 : Gross 270 kW 362 HP
ISO 9249/SAE J1349 : Net 268 kW 359 HP
Rated rpm 1900 rpm
Governor All-speed control, electronic.
Fan drive method for radiator cooling Hydraulic
*EPA Tier 4 Final emissions certified
Hydraulic
Type: HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valves, 6 selectable working modes
Main pumps:
Pumps for Boom, arm, bucket, swing, and travel circuits
Type Variable displacement axial piston type
Maximum flow 780 ltr/min 206 U.S. gal/min
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 380 kgf/cm²/ 37.3 MPa 5,400 psi
Travel circuit 380 kgf/cm² / 37.3 MPa 5,400 psi
Swing circuit 285 kgf/cm²/ 27.9 MPa 4,050 psi
Pilot circuit 33 kgf/cm² / 3.2 MPa 470 psi
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 160 mm x 1570 mm x 110 mm 6.3" x 61.8" x 4.3"
Arm / 1 185 mm x 1820 mm x 120 mm 7.3" x 71.7" x 4.7"
Bucket / 1 160 mm x 1270 mm x 110 mm 6.3" x 50" x 4.3"
Drives & Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 329 kN / 33510 kg 73,880 lb
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift):
High 5.5 km/h 3.4 mph
Mid 4.2 km/h 2.6 mph
Low 3.0 km/h 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.0 rpm
Swing torque 13414 kg•m 97,024 ft. lbs.
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes 49 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 650 ltr 172 U.S. gal
Coolant 47 ltr 12.4 U.S. gal
Engine 38 ltr 10.0 U.S. gal
Final drive, each side 11 ltr 2.9 U.S. gal
Swing drive 20 ltr 5.3 U.S. gal
Hydraulic tank 248 ltr 65.5 U.S. gal
Diesel Exhaust Fluid (DEF) tank 39 ltr 10.3 U.S. gal
Operating Weight (approximate)
Operating weight includes 7060 mm 23'2" one-piece HD boom, 3380 mm 11'1" arm, SAE heaped 2.25 m3 2.94 yd3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Fixed Gauge
Shoes 700 mm 28"
Operating Weight 47930 kg 105,670 lb
Ground Pressure 0.73 kg/cm² 10.38 psi
Shoes 800 mm 31.5''
Operating Weight: 48430 kg 106,770 lb
Ground Pressure 0.65 kg/cm² 9.20 psi
Shoes 900 mm 35.5"
Operating Weight: 48920 kg 107,850 lb
Ground Pressure 0.58 kg/cm² 8.32 psi
Variable Gauge
Shoes 700 mm 28"
Operating Weight 49005 kg 108,040 lb
Ground Pressure 0.75 kg/cm² 10.61 psi
Shoes 800 mm 31.5''
Operating Weight: 49505 kg 109,140 lb
Ground Pressure 0.67 kg/cm² 9.40 psi
Shoes 900 mm 35.5"
Operating Weight: 49995 kg 110,220 lb
Ground Pressure 0.60 kg/cm² 8.50 psi

Komatsu Excavators PC490LC-10 SLF
PC490LC-10 Super Long Front 54'-55' Reach

The super long front on the PC490LC-10 gives you a huge working range to go along with the power and stability it already provides. The functions and operations are that of the standard excavator but with a wide variety of ditch cleaning and general purpose buckets for dredging, cleaning and sloping applications.

Notes:

  • The details in this specification brochure are based on Dash 8 and Dash 10 models as indicated. Some attachments may be installed on prior models but specifications may vary. Contact Young Corporation for details.
  • Variations to the specifications in this brochure can be designed and produced in accordance with customer requirements by contacting Young Corporation with details.
  • SUPER LONG FRONT ATTACHMENTS are designed for “LIGHT DUTY"work only. Excavating work or heavy hoisting may result in side loads and other activities that will damage the machine.
  • Disassembly may be required due to transport restrictions.
  • Illustrations may include optional equipment.
  • Operating weights include additional counterweight when required.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics