Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Hialeah, Florida

In terms of convenience ease & flexibility, access to the latest technology, taxes, maintenance options and numerous other factors including an ever growing cost of ownership, construction equipment rental in Hialeah is a better option than having to buy heavy machinery or other construction equipment.

If you are looking for vendors who can supply you with necessary heavy construction equipment for a limited period of time in Hialeah, you've landed on the right platform. It’s a network of some of the most credible and well established vendors in the region. Whatever your equipment needs be, you will have no trouble finding the right vendor with our assistance.

Getting started is easy. Just dial the toll free number or fill up the contact form on the right.

Once you learn about your requirements, we will put you in touch with the right vendor in as little as one day!

Equipment Rental Hialeah, Construction equipment rental Hialeah, Construction rental Hialeah, Heavy Equipment Hialeah.

Komatsu Wheel Loaders WA380-7
WA380-7 Wheel Loader

The Tier 4 interim WA380-7 will save you 10% on your fuel bill over the previous model. Two engine power modes, power and economy, let the operator match his work mode to the job at hand. The large capacity torque converter with enhanced lock-up gives the WA380-7 terrific digging power in the pile and climbing ability. SmartLoader Logic ensure that the WA380-7 works most efficiently under low demand conditions to ensure further energy and fuel savings.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in3 6.69 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 192 HP 143 kW
ISO 9249/SAE J1349 / Net 191 HP 142 kW
Rated rpm 2100 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Automatic, full-poweshift, counter-shaft type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.1 mph
6.6 km/h
4.4 mph
7.1 km/h
2nd gear 7.3 mph
11.7 km/h
7.7 mph
12.4 km/h
2nd gear (Lock-up clutch ON) 7.7 mph
12.4 km/h
8.3 mph
13.3 km/h
3rd gear 13.0 mph
20.9 km/h
13.9 mph
22.3 km/h
3rd gear (Lock-up clutch ON) 14.0 mph
22.5 km/h
15.0 mph
24.1 km/h
4th gear 22.4 mph
36.1 km/h
24.0 mph
38.6 km/h
4th gear (Lock-up clutch ON) 24.9 mph
40.0 km/h
24.9 mph
40.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 35° (40° to max end stop)
Minimum turning radius at the center of outside tire 20'9" 6320 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 36.2 U.S. gal/min 137 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.0" x 17.4" 75 mm x 442 mm
Loader control:
Hydraulic pump Gear type pump
Capacity at rated rpm 54.13 U.S. gal/min 204.9 ltr/min
Relief valve setting 4,550 psi 31.4 MPa / 320 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Lift cylinder - 2 5.1" x 28.1" 130 mm x 713 mm
Bucket cylinder - 1 5.9" x 21.1" 150 mm x 535 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.9 sec
Dump 1.8 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 14.4 U.S. gal 54.4 ltr
Fuel tank 79.3 U.S. gal 300 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 37.5 U.S. gal 142 ltr
Axle (each front and rear) 10.6 U.S. gal 40 ltr
Torque converter and transmission 14.3 U.S. gal 54 ltr

John Deere Crawler Dozers 450J LT
Push productivity to the next level.

Often imitated but never duplicated, the John Deere 450J Dozer continues to set the standard for operator control and productivity. Backed by 30-plus years of hydrostatic experience, its unique state-of-the-art Total Machine Control (TMC) enables an operator to customize machine operation and response to personal preferences. Coupled with an uncommonly smooth full-feature hydrostatic transmission, the John Deere Crawler 450J delivers unsurpassed productivity, uptime, and daily operating costs. That's for starters.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech M 4045
Net Power, kW (hp) @ Rated rpm 52 (70) @ 2200
Displacement, L (cu in) 4.5 (276)
Transmission
Transmission Manufacturer Hydrostatic
Speed Range - forward 1
Speed Range - reverse 1
Maximum Speeds Forward, kph (mph) 8 (5)
Maximum Speeds Reverse, kph (mph) 8 (5)
Final Drives
Type Triple Reduction
Steering
Type Hydrostatic
Hydraulic System
Pump Type Gear Type Pump
Pump Flow, L/min (gpm) 57 (15)
System pressure, kPa (psi) 20680 (3000)
Undercarriage
Track Gauge, mm (ft in) 1392 (4 ft 7 in)
Length of Track on Ground, mm (ft in) 2184 (7 ft 2 in)
Standard shoe type Single Grouser
Ground Contact Area, cm sq (sq in) 17755 (2752)
Ground Pressure, kPa (psi) 40.7 (5.9)
No. of Track Rollers 6
Track Pitch, mm (in) 160 (6.29)
Track Shoes, each side 40
Track Oscillation --
Dozer
Blade Width, mm (ft in) 2464 (8 ft 1 in)
Blade Height, mm (ft in) 955 (3 ft 2 in)
SAE Blade Capacity, cu m (cu yd) 1.6 (2.1)
Blade Lift Height, mm (ft in) 772 (2 ft 6 in)
Digging Depth, mm (in) 528 (20.8)
Overall Width with Blade Angled, mm (ft in) not published
Blade Tilt, mm (ft in) 338 (1 ft 1 in)
Dimensions
Height w/ROPS, mm (ft in) 2747 (9 ft )
Length w/Dozer, mm (ft in) 3940 (12 ft 11 in)
Ground Clearance, mm (in) 345 (13.6)
Capacities
Fuel Tank, L (gal) 178 (47)
Hydraulic Reservoir, L (gal) 32.2 (8.5)
Weight
SAE Operating Weight, kg (lb) 7386 (16283)

JCB Light Equipment Submersible Pump

Submersible Pump

JCB's submersible pump comes in either 20 l/min or 30 l/min flow rate guises to match different hydraulic flow power packs. Whichever option you choose, it will be self-priming with a high power-to-weight ratio.

Because our submersible pumps are hydraulically driven, they're self lubricating, maintenance free and can run dry without damage. Aluminium bodies make for light weight and a corrosion free life, while a lifting lug allows them to be safely and accurately placed.

JCB's unique combi-seal prevents any water entering the hydraulic fluid or vice versa.

    • Flat faced quick-release dripless couplings for speed of attachment change
    • Lifting eye to aid placement
    • Supplied with 10m 2in lay flat hose
    • Self priming for speed of use
    • Capable of pumping solids in suspension up to 8mm (6/10 in) diameter for extra versatility

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics