Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Abbeville, Georgia

We deliver comprehensive heavy construction equipment rental solutions in Abbeville, every time. Opting for our unprecedented premier service is easy – just ring us on the toll free number or submit a message through the contact form on the right.

You can narrate your construction equipment requirements to us, tell us whether you need transportation services as well, and we will put you in touch with the right vendor in no time! Here, we do not operate as order takers only. We are an organization powered by years of first-hand experience in the construction industry and operate as problem solvers for construction industry players like you!

Do you need skid steers, excavators, boom lifts, etc. or construction tools and supplies for a major construction project or just want to equipment on rent on a job-to-job basis, we’ve got you covered! The inventory of equipment in Abbeville is more than enough to meet your requirements.

Equipment Rental Abbeville, Construction equipment rental Abbeville, Construction Abbeville, Heavy Equipment Rental Abbeville.

Komatsu Forklift FH Series
FH Series IC Pneumatic

This new diesel hydrostatic drive family achieves its durability and low costs of ownership from its rugged designs and field proven components. With Komatsu's hydrostatic drive system, standard wet disc brakes, and Closed-center Load Sensing hydraulic system (CLSS), the FH series achieves reduced costs of operation and reduced maintenance costs. The FH series lowers your cost of operation in a variety of demanding, high-cycle operations. Also equipped with KOMTRAX - Komatsu's exclusive information data management system.

General
GENERAL FH40-1 FH45-1 FH50-1
Power Type Diesel Diesel Diesel
Operation Type Sit-Down Sit-Down Sit-Down
Rated Capacity 9,000 lbs 10,000 lbs 11,000 lbs
Rated Load Center 23.6 in 23.6 in 23.6 in
Load Distance, Front Axle to Fork Face 22.8 in 23.2 in 22.6 in
Wheelbase 78.7 in 78.7 in 78.7 in
Weight
WEIGHT FH40-1 FH45-1 FH50-1
Service Weight 13,867 lbs 15,256 lbs 16,270 lbs
Axle Loading Loaded Front 13,228 lbs 21,958 lbs 54,086 lbs
Loaded Rear 2,844 lbs 3,285 lbs 3,208 lbs
Unloaded Front 5,710 lbs 6,063 lbs 6,393 lbs
Unloaded Rear 8,157 lbs 9,193 lbs 9,877 lbs
Tires
TIRES FH40-1 FH45-1 FH50-1
Tire Type Pneumatic Pneumatic Pneumatic
Tire Size Front 300 - 15 - 18PR (I) 300 - 15 - 18PR (I) 300 - 15 - 18PR (I)
Rear 7 - 12 - 12PR (I) 7 - 12 - 14PR (I) 7 - 12 - 14PR (I)
Number of Wheels, Front/Rear 2x / 2 2x / 2 2x / 2
Tread Front 48.2 in 48.2 in 48.2 in
Rear 44.1 in 44.1 in 44.1 in
Dimensions
DIMENSIONS FH40-1 FH45-1 FH50-1
Tilting Angle, Forward/Backward 6 / 12 deg 6 / 12 deg 6 / 12 deg
Mast Height Lowered 82.9 in 86.8 in 86.8 in
Extended 162.6 in 162.6 in 171.1 in
Free Lift Height 5.9 in 5.7 in 5.5 in
Standard Lift Height 118.1 in 118.1 in 118.1 in
Height Overhead Guard 88.2 in 88.2 in 88.2 in
Length, with Standard Forks 88.2 in 168.1 in 173.4 in
Length to Fork Face 124 in 126 in 125.4 in
Overall Width at Drive Tires 59.8 in 59.8 in 59.8 in
Forks, Thickness x Width x Length 2.2 x 5.9 x 42.1 in 2.2 x 5.9 x 42.1 in 2.2 x 5.9 x 48 in
Carriage Width/ITA Class 46.9 in / III 46.9 in / III 50 in / III
Ground Clearance, Under Mast 5.7 in 5.7 in 5.7 in
Ground Clearance, Center of Wheelbase 8.3 in 8.3 in 8.3 in
Aisle Width L1000 x W1200 pallet 184.8 in 187.2 in 193.7 in
L1200 x W800 pallet 190 in 192.3 in 193.7 in
Turning Radius, Outside 112 in 114 in 115.2 in
Performance
PERFORMANCE FH40-1 FH45-1 FH50-1
Travel Speed, Loaded/Unloaded 14.6 / 14.6 mph 14.6 / 14.6 mph 14.6 / 14.6 mph
Lifting Speed, Loaded/Unloaded 95.8 / 99.4 fpm 82.7 / 86.6 fpm 82.7 / 86.6 fpm
Lowering Speed, Loaded/Unloaded 98.4 / 98.4 fpm 98.4 / 98.4 fpm 98.4 / 98.4 fpm
Maximum Drawbar Pull, Loaded 7,644 lbs 7,644 lbs 7,868 lbs
Maximum Gradeability 33% 29% 28%
Service Brake, Operation/Control Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic
Parking Brake, Operation/Control Hand / Mechanical Hand / Mechanical Hand / Mechanical
Steering Type FHPS FHPS FHPS
Drive
DRIVE FH40-1 FH45-1 FH50-1
Engine Manufacturer / Engine Model Komatsu SAA4D95LE-5 Komatsu SAA4D95LE-5 Komatsu SAA4D95LE-5
Rated Output (SAE Net) 68.1 HP @2,150 rpm 68.1 HP @2,150 rpm 68.1 HP @2,150 rpm
Maximum Torque (SAE Net) 212 lb-ft @ 1,400 rpm 212 lb-ft @ 1,400 rpm 212 lb-ft @ 1,400 rpm
# of Cylinders / Displacement 4 / 199 cu in 4 / 199 cu in 4 / 199 cu in
Fuel Tank Capacity 27.7 US Gallons 27.7 US Gallons 27.7 US Gallons
Other
OTHER FH40-1 FH45-1 FH50-1
Battery, Voltage/Capacity 24 V / 52 Ah 5hr 24 V / 52 Ah 5hr 24 V / 52 Ah 5hr
Relief Pressure, Maximum 2,988 psi 2,988 psi 2,988 psi
Hydraulic Tank Capacity 21.9 US Gallons 21.9 US Gallons 21.9 US Gallons
Transmission Hydrostatic Hydrostatic Hydrostatic

Komatsu Forklift AM50 Series
AM50 Series Electric Riders

Komatsu's electric counterbalanced forklifts bring bold improvements to the market with significant reductions in total operating costs while improving truck performance and productivity. Komatsu's AE50 and AM50 Series of four-wheel and three-wheel electric cushion and pneumatic tire forklifts feature innovative engineering ideas to show Komatsu's commitment to fulfilling customer needs, conserving or environment, and reducing total cost of ownership.

General
GENERAL FB15MU-12 FB18MU-12 FB20MU-12
Power Type Electric Electric Electric
Operation Type Sit-Down Sit-Down Sit-Down
Capacity @ 24 in. (600mm) Load Center 3,000 lbs 3,500 lbs 4,000 lbs
Load Distance From Center Axle (2 Stage) 15.9 in 15.9 in 16.7 in
Wheelbase 52.8 in 54.7 in 58.5 in
Weight
WEIGHT FB15MU-12 FB18MU-12 FB20MU-12
Service Weight 7,010 lbs 7,640 lbs 8,600 lbs
Axle Loading Loaded Front 8,760 lbs 9,700 lbs 11,070 lbs
Loaded Rear 1,250 lbs 1,440 lbs 1,530 lbs
Unloaded Front 3,420 lbs 3,570 lbs 4,190 lbs
Unloaded Rear 3,590 lbs 4,070 lbs 4,410 lbs
Tires
TIRES FB15MU-12 FB18MU-12 FB20MU-12
Tire Type Cushion Cushion Cushion
Tire Size Front 18 x 7 x 12.13 in 18 x 7 x 12.13 in 18 x 8 x 12.13 in
Rear 15 x 5 x 11.25 in 15 x 5 x 11.25 in 15 x 5 x 11.25 in
Number of Wheels, Front/Rear 2x / 2 (dual) 2x / 2 (dual) 2x / 2 (dual)
Tread Front 37 in 37 in 37.4 in
Rear 6.7 in 6.7 in 6.7 in
Dimensions
DIMENSIONS FB15MU-12 FB18MU-12 FB20MU-12
Tilting Angle, Forward/Backward 6 / 10 deg 6 / 10 deg 6 / 10 deg
Mast Height Lowered 84.4 in 84.4 in 89 in
Extended 167.5 in 167.5 in 168.1 in
Free Lift Height 5.9 in 5.9 in 6.7 in
Maximum Fork Height 129.9 in 129.9 in 129.9 in
Height Overhead Guard 81.5 in 81.5 in 81.5 in
Length, with Standard Forks 118.3 in 120.9 in 125.4 in
Length to Fork Face 76.2 in 78.7 in 83.3 in
Overall Width at Drive Tires 43.8 in 43.8 in 45.8 in
Forks, Thickness x Width x Length 1.4 x 3.9 x 42.1 in 1.4 x 3.9 x 42.1 in 1.4 x 4.8 x 42.1 in
Carriage Width/ITA Class 38.2 in / II 38.2 in / II 38.2 in / II
Ground Clearance, Under Mast 3.7 in 3.7 in 3.7 in
Ground Clearance, Center of Wheelbase 4.9 in 4.9 in 4.9 in
Right Angle Stacking Aisle 120.5/125.3 in 122.8/127.7 in 127.4/132.4 in
Turning Radius, Outside 60.2 in 62.6 in 66.5 in
Performance
PERFORMANCE FB15MU-12 FB18MU-12 FB20MU-12
Travel Speed, Loaded/Unloaded 10.0 / 11.0 mph 10.0 / 11.0 mph 9.0 / 10.0 mph
Lifting Speed, Loaded/Unloaded 66.9 / 118.1 fpm 63.0 / 118.1 fpm 55.1 / 98.4 fpm
Lowering Speed, Loaded/Unloaded 88.6 / 108.3 fpm 88.6 / 108.3 fpm 72.8 / 86.6 fpm
Maximum Drawbar Pull, Loaded 2,150 lbs 2,150 lbs 2,040 lbs
Maximum Gradeability 19% 16% 14%
Service Brake, Operation/Control Foot/Hydraulic Foot/Hydraulic Foot/Hydraulic
Parking Brake, Operation/Control Hand/Mechanical Hand/Mechanical Hand/Mechanical
Steering Type Fully Hydrostatic Power Steering Fully Hydrostatic Power Steering Fully Hydrostatic Power Steering
Drive
DRIVE FB15MU-12 FB18MU-12 FB20MU-12
Drive Motor (AC) 6.0 x 2 HP 6.0 x 2 HP 6.0 x 2 HP
Pump Motor (AC) 12.1 HP 12.1 HP 12.1 HP
Battery Voltage 48 V 48 V 48 V
Battery Capacity, Maximum 600 Ah/6hr 600 Ah/6hr 600 Ah/6hr
Minimum Battery Weight 1,590 lbs 1,590 lbs 1,680 lbs
Maximum Battery Weight 2,100 lbs 2,100 lbs 2,100 lbs
Other
OTHER FB15MU-12 FB18MU-12 FB20MU-12
Drive Motor Control AC Inverter AC Inverter AC Inverter
Relief Pressure - Attachment 2,300 psi 2,300 psi 2,300 psi
Hydraulic Oil Capacity 6.1 US Gallons 6.1 US Gallons 6.1 US Gallons

Komatsu Dozers D39EX-23
D39EX-23 Crawler Dozer
Need a great grading tractor with plenty of power and a cab your operators will fight over. You've found it with the D39EX-23. The super slant nose moves the coolers and hydraulic fan to the rear, the operator more forward and the result is a new way of balancing a dozer to make it an incredibly easy tractor to finish grade with. Add a more efficient, fully hydrostatic drivetrain for precise maneuverability and control, two working modes for more efficient work matching and fuel savings and fuel efficient Tier 4 interim engine technology and you have everything you want and need in a small dozer. Put your grade control system on it and you have a high speed yet very precise fine grading system.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 107 HP 79 kW
ISO 9249 / SAE J1349 - Net 105 HP 78 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic (reversible)
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.

Minimum turning radius* 87" 2.2 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 6
Type of shoes (standard) Single grouser
Number of shoes (each side) 39
Grouser height 2.1" 53 mm
Shoe width (standard) 20" 510
Ground contact area 3,708 in² 23919 cm²
Ground pressure
(with dozer, ROPS cab)
5.60 psi 0.39 kgf/cm² / 37.8 kPa
Track gauge 5'4" 1620 mm
Length of track on ground 7'8" 2345 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 15.8 U.S. gal 60 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,210 lb 8860 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,749 lb 9410 kg
hydraulic system 
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders   Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.6" 90 mm
Blade angle / 2 3.1" 80 mm
Blade pitch 1 adjustable linkage
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle  Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift   Raise, hold, and lower

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics