Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Buford, Georgia

We deliver comprehensive heavy construction equipment rental solutions in Buford, every time. Opting for our unprecedented premier service is easy – just ring us on the toll free number or submit a message through the contact form on the right.

You can narrate your construction equipment requirements to us, tell us whether you need transportation services as well, and we will put you in touch with the right vendor in no time! Here, we do not operate as order takers only. We are an organization powered by years of first-hand experience in the construction industry and operate as problem solvers for construction industry players like you!

Do you need skid steers, excavators, boom lifts, etc. or construction tools and supplies for a major construction project or just want to equipment on rent on a job-to-job basis, we’ve got you covered! The inventory of equipment in Buford is more than enough to meet your requirements.

Equipment Rental Buford, Construction equipment rental Buford, Construction Buford, Heavy Equipment Rental Buford.

Toyota Forklift 4FDK160

8 Series Internal Combustion Pneumatic Tier Forklift-4FDK160

Cushion Tire

  • 22,000-35,000 lbs. Lifting Capacity @ 24 inch load center
  • Diesel

Every Toyota forklift undergoes the same world-renowned manufacturing process. Extra steps are always taken to ensure reliability and durability. Rest assured, these models are built to withstand the most demanding applications.

ERGONOMICS
  • Hydraulic seat-side pilot-type short-throw levers
  • Left-hand shift lever
  • Tilt steering column
  • Long operator assisted grips
  • Non-slip rubber floor mat
PeRFORMANCE
  • EPA/CARB certified diesel engine
  • Hino 7.68 liter, 6 cylinder diesel engine (J08E-UM)
    • Common-rail electronic fuel injection system
    • Turbocharged and intercooled
    • Water cooled EGR valve
    • Quick-glow system
  • UL-D Conformity
  • 24 volt electrical system
  • Automatic 2 speed transmission with a 2 stator torque converter (2 FWD / 1 REV)
  • 2-function hydraulic control valve (lift and tilt)
  • Independent brake & inching pedals
  • Full hydraulic power steering with synchronized steering
  • Electric parking brake
  • Warning buzzer for parking brake (Release)
  • Upswept exhaust
  • Vinyl multifunction deluxe seat with armrests
  • Integrated monitoring system - includes
    • Hour meter display
    • Fuel gauge
    • Low fuel warning light
    • Engine coolant level warning light
    • Engine oil pressure warning light
    • Clogged air cleaner warning light
    • Battery charge warning light
    • Torque converter oil temperature warning light
    • Check engine light
    • Pre-heat indicator light
    • Sedimenter warning light
    • Brake warning light
    • SAS warning light (synchronized steering)
    • Engine water temperature indicator
    • Speedometer
    • Brake air pressure gauge
  • Lifting eyes (2 mast mounted and 2 counterweight mounted, not level)
  • 2 stage limited free lift wide visible mast (V)
  • Manual fork positioner (V mast only)
  • Headlights
  • Turn signal lights (4 lights)
  • Rear combination lights
  • Back-up lights
  • Rear working lights (2 lights)
  • Key off headlight and other electric components
  • Rear-view mirrors (right and left sides)
  • Rear-view mirror
  • Fuel tank cap with key
EASE OF SERVICE
  • Engine monitoring system
  • Centralized grease lubrication (mast, rear axle)
  • All wheel rotatable tires
SAFETY
  • Operator Presence Sensing System (OPSS)
  • Air horn
  • Asbestos free components
  • Neutral safety switch
  • Engine key stop
  • Overhead guard
  • ORS seat
DURABILITY
  • Wet disc brakes with dedicated oil cooling system
  • Air brakes with air dryer
  • AxleTech planetary drive axle
  • Rigidly constructed box type welded frame
  • Engine protection system
  • High cooling capacity radiator with fan shroud
  • Large capacity engine cooling fan
  • Fully oil charged lift cylinders
  • Rubber mounted Hydraulic system
  • Pin type forks
  • Low maintenance battery
  • Cyclone air cleaner
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.) Turning Radius (in.) Overall Truck Dimensions (in.)
Length Width Height
4FDK160 35,000 168/2300 21.1 67 30 204.7 175 185 97.8 125

Toyota forklifts 8FGCU30

8 Series Internal Combustion-8FGCU30

Cushion Tire

  • 3,000-6,500 lbs. Lifting Capacity
  • Gas/LPG/CNG
  • System of Active StabilityTM (SAS)

The 8-Series cushion tire truck features major enhancements that improve every aspect of forklift operation. The exclusive System of Active StabilityTM (SAS) electronically monitors and controls the forklift's operations to help reduce the risk of tipovers. And innovative ergonomic design substantially improves operator comfort, performance and productivity.

ERGONOMICS
  • Dash mounted instrument display
  • 11.8" diameter two-spoke steering wheel
  • Hydrostatic power steering
  • Heavy-duty non-slip rubber floor mat
  • 12" long dual operator assist grips
  • Cowl-mount hydraulic control levers with rubber boot covers
  • Low wide entry steps
  • Low profile front cowl
  • Non-cinching seat belt
  • Dash integrated amenity tray and oversized cup holder
  • 4-way adjustable vinyl full-suspension seat
  • Slim profile, tilt steer column
PERFORMANCE
  • Toyota 136 cu. in., 4-cylinder, OHV gasoline engine (4Y-ECS)
  • Electronic fuel injection (gasoline only)
  • UL "G" gasoline engine
  • One-way automatic fork leveling
  • Independent brake & inching pedals
  • 2-stage limited free lift mast (V)
  • Integrated monitoring system - includes
    • Digital hour meter display
    • Engine coolant temperature gauge
    • Fuel gauge (gasoline only)
    • Check engine light
    • Engine oil pressure warning light
    • Battery charge warning light
    • OPSS activation light
    • SAS/OPSS warning light
  • Adjustable headlights with guards
  • Foot-activated parking brake
  • Alternator with built-in regulator
  • Transistorized ignition assembly
  • Automatic transmission with oil cooler
  • Full floating powertrain
  • Hydraulic valve lifters
  • Integrated head light and turn signal lever
  • Electric shift control
EASE OF SERVICE
  • Easy access no-tools floorboard
  • Engine hood assist damper with lock device
  • Air cleaner discharge valve
  • Externally mounted hydraulic oil return filter
  • Dash mounted brake fluid level check
  • Easy lift engine hood with wide 75 degree opening
SAFETY
  • System of Active StabilityTM (SAS)
  • Operator Presence Sensing System (OPSS)
  • Bolt-on overhead guard
  • Key lowering interlock
  • Electric horn
  • Neutral engine start safety switch
  • Asbestos free components
DURABILITY
  • Control Area Network (CAN-bus) communication
  • Fully-stamped steel side panels
  • Moisture resistant electric connectors
  • High cooling capacity radiator with fan shroud
  • Low maintenance battery
  • Large capacity engine cooling fan
  • 7" cyclone air cleaner with high positioned external air-intake (6" diameter on 8FGCU15.18.S20)
  • Plate iron front fenders
  • Anti-restart ignition key switch
  • Stamped steel engine hood
  • Fully-sealed air-intake system
  • Self-adjusting brakes
OPTIONS
Scale Option
  • Available on 4,000 lb. to 5,000 lb. Internal Combustion I.C. forklifts
  • Ideal for freight handlers, warehouses, and general shipping and receiving docks
  • Allows for simultaneous weighing and transportation of loads, resulting in increased efficiency and reduced logistic expenses.
  • Enables operators to quickly view, record or transfer legal-for-trade load weight information as the load is being transported through the facility.
  • Recessed Weight Sensors Offer Durability, Virtually No Maintenance
  • Accurate Measurement Helps Reduce Shipping Weight Discrepancies
  • Industry Exclusive Scale-Mounted Fork Positioner option
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.) Turning Radius (in.) Overall Truck Dimensions (in.)
Length Width Height
8FGCU30 6,000 51/2570 10.6 102 25 97.5 80 97.4 43.7 80.7

John Deere Wheel Loader 744K-II Final Tier 4

Productivity inspired.
Serious productivity demands serious thinking. Many of the numerous advantages of the 744K-II came from the brightest minds in the industry - our Customer Advocate Group. Armed with insights from loader owners and users like you, we equipped these productive material movers with larger new higher-capacity axles with standard axle cooling and filtration for heavy-duty maneuverability in the most demanding terrain. Self-adjusting wet-disc brakes for extended wear life and sure stops. Advanced on board diagnostics with pushbutton customization of machine operation and response. All to help increase productivity and uptime, while lowering daily operating costs. Owners, operators, and maintenance personnel will benefit from the big ideas found in the 744K-II loaders.

ENGINE
Engine Make / Engine Model John Deere / PowerTech PSS 6090
Emission Rating EPA Final Tier 4 / EU Stage IV
Net Power, kW (hp) @ Rated rpm 226 (303) @ 1500
Displacement, L (cu in) 9 (548)
Net Peak Torque, N-m (lb-ft) 1455 (1073)
Calculated % Torque Rise 50
ELECTRICAL
Volts 24
Alternator amps 130
TRANSMISSION
Type PowerShift
Max. Travel Speed - fwd, kph (mph) 40 (24.9)
Max. Travel Speed - rev, kph (mph) 32.3 (20.1)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Single Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic
HYDRAuLIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 491 (130)
System Pressure, kPa (psi) 22670 (3288)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 4 (5.25)
Bucket Capacity Max., cu m (cu yd) 4.4 (5.75)
Breakout Force, Std Bucket, kN (lb) 19416 (42805)
Ride Control Yes
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 4 (5.25)
Tire Size Standard 26.5 R25
TIPPING LOAD
Straight, kg (lb) 19854 (43771)
Full Turn, kg (lb) 17137 (37782)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4280 (14 ft. 1 in.)
Dump Clear @ 45 deg, mm (ft in) 3040 (10 ft )
Reach @ 7', mm (ft in) 1850 (6 ft 1 in)
Reach @ Full Height, mm (ft in) 1230 (4 ft )
Wheelbase, mm (ft in) 3460 (11 ft 4 in)
Clearance Circle, mm (ft in) 14010 (46 ft 0 in)
Overall Length, mm (ft in) 9010 (29 ft 7 in)
Height to Top of Cab, mm (ft in) 3500 (11 ft 6 in)
Ground Clearance, mm (in) 462 (18.2)
CAPACITIES
Fuel Tank, L (gal) 477 (126)
Hydraulic Reservoir, L (gal) 165.3 (43.7)
WEIGHT
SAE Operating Weight, kg (lb) 25358 (55905)
Metric Ton Weight, kg (lb) 25.358 (55.905)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics