get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Porterdale, Georgia

We deliver comprehensive heavy construction equipment rental solutions in Porterdale, every time. Opting for our unprecedented premier service is easy – just ring us on the toll free number or submit a message through the contact form on the right.

You can narrate your construction equipment requirements to us, tell us whether you need transportation services as well, and we will put you in touch with the right vendor in no time! Here, we do not operate as order takers only. We are an organization powered by years of first-hand experience in the construction industry and operate as problem solvers for construction industry players like you!

Do you need skid steers, excavators, boom lifts, etc. or construction tools and supplies for a major construction project or just want to equipment on rent on a job-to-job basis, we've got you covered! The inventory of equipment in Porterdale is more than enough to meet your requirements.

Equipment Rental Porterdale, Construction equipment rental Porterdale, Construction Porterdale, Heavy Equipment Rental Porterdale.

Unable to parse entered address. API response code: REQUEST_DENIED

JCB Teletruks TLT 35D
TLT 35D
The TLT35D 2wd and 35D 4x4 counterbalance forklifts are strong and exceptionally versatile performers, weighing up to 12,125lb.

Maximum lift capacity is 7,000lb with maximum lift height of 14ft,5 inches and a maximum forward reach of 8ft.

The JCB 35D Teletruk is powered by the new Tier 4/Stage IIIB JCB Diesel by Kohler 62HP engine.

Our unique telescopic boom offers many benefits which are:

Unrivalled visibility - No obstructive mast improving site safety.

Forward reach - Ability to single side load, reduces double-handling and keeps operators clear of hazardous environments.

111 degrees of carriage rotation - Making handling of unpalletised goods much easier and safer.

Space savings - 50% less loading space required in congested yards.

Lift Performance
Maximum Lift Capacity 7000lb
Capacity at 6ft 6in reach 3750lb
Maximum Lift Height 14' 5"

Komatsu Excavators PC210LCi-10

PC210LCi-10 Hydraulic Excavator

The Komatsu PC210LCi-10 is the world's first intelligent Machine Control excavator. It features Komatsu's revolutionary machine control and guidance system, fully factory integrated with the other qualities and benefits of the standard Komatsu PC210LC-10 excavator. The exclusive control function lets you focus on moving material efficiently, with no worry about digging too deep or damaging the target surface. From rough digging to finish grading, the PC210LCi-10 excavator drastically improves efficiency and precision on your work sites. Unearth your productivity.

Engine
Model Komatsu SAA6D107E-2*
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 107 mm 4.21''
Stroke 124 mm 4.88''
Piston displacement 6.69 ltr 408 in³
Horsepower:
SAE J1995 - Gross 123 kW 165 HP
ISO 9249 / SAE J1349 - Net 118 kW 158 HP
Rated rpm 2000 rpm
Fan drive method for radiator cooling Mechanical
Governor All-speed control, electronic
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydraulics
Type - HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 475 ltr/min 125.5 U.S. gal/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 380 kgf/cm²/ 37.3 MPa 5,400 psi
Travel circuit 380 kgf/cm² / 37.3 MPa 5,400 psi
Swing circuit 295 kgf/cm²/ 28.9 MPa 4,190 psi
Pilot circuit 33 kgf/cm² / 3.2 MPa 470 psi
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 Bore x Stroke x Rod Diameter 5.1" x 52.5" x 3.5"
Arm / 1 Bore x Stroke x Rod Diameter 5.3" x 58.7" x 3.7"
Bucket / 1 Bore x Stroke x Rod Diameter 4.5" x 44.1" x 3.2"
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 202 kN / 20570 kg 45,349 lb
Gradeability 70% 35°
Maximum travel speed: (Auto-Shift)
High 5.5 km/h 3.4 mph
Mid 4.1 km/h 2.5 mph
Low 3.0 km/h 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 12.4 rpm
Swing torque 6900 kg.m 49,907 ft lbs
Undercarriage
Center frame X-leg frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 49 each side
Number of carrier rollers 2 each side
Number of track rollers 9 each side
Coolant and Lubricant Capacity refilling
Fuel tank 400 ltr 105.7 U.S. gal
Coolant 30.7 ltr 8.1 U.S. gal
Engine 23.1 ltr 6.1 U.S. gal
Final drive, each side 5.0 ltr 1.3 U.S. gal
Swing drive 6.5 ltr 1.7 U.S. gal
Hydraulic tank 132 ltr 34.9 U.S. gal
Hydraulic system 234 ltr 61.8 U.S. gal
Operating Weight (APROXIMATE)
Operating weight, including 5700 mm / 18'8" one-piece boom, 2925 mm / 9'7" arm, SAE heaped 1.02 m³ / 1.34 yd³ bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Triple-Grouser Shoes Ground Pressure: Operating Weight:
28" / 700 mm 23323 kg
51,419 lb		 0.43 kg/cm²
6.2 psi
31.5' / 800 mm 23603 kg
52,036 lb		 0.38 kg/cm²
5.5 ps

Komatsu Excavators PC27MR-3
PC27MR-3 Hydraulic Excavator

Small but powerful, the PC27MR-3 is constructed like a big Komatsu excavator with a high strength x-frame, PPC joysticks, pattern change valve but with the addition of a swinging boom, three track option and tight tail swing. If you need versatility in a small package, Komatsu mini-excavators are just what you are looking for.

Engine
Model Komatsu 3D82AE-6
Type Direct injection
Piston displacement 81 in³ 1.33 ltr
Horsepower @ 2600 rpm:
Net (ISO 9249/SAE J1349) 25.7 HP 19.2 kW
Electric System
Operation voltage 12 V
Battery 58 Ah
Alternator 40 A
Starter 2.3 kW
Hydraulic System
Type HydrauMind
Main pump:
Type Variable displacement x 1Gear x 1
Maximum flow 18.7 x 1 + 5.7 gal/min 70.6 x 1 + 21.4 ltr/min
Hydraulic motors:
Travel Variable displacement x 2
Swing Fixed displacement x 1
Maximum pressure setting 3,560 psi 250 kg/cm²
Auxiliary flow 13.2 gal/min 50 ltr/min
Performance
Travel speed:
High 3.0 mph 4.8 km/hr
Low 1.6 mph 2.6 km/hr
Swing speed 9.2 rpm
Ground pressure 4.1 psi 0.29 kg/cm²
Max. drawbar pull 7,050 lb 3200 kg
Gradeability 30°
Bucket digging force (ISO) 4,920 lb 2230 kg
Arm crowd force (ISO) 2,646 lb 1200 kg
Drives and Brakes
Drive method Hydrostatic
Type of travel brake Hydraulic lock
Type of travel shoe Rubber
Undercarriage
Adjustment of the track tension Grease gun
Number of carrier rollers (each side) 1
Number of track rollers (each side) 4
Refill Capacities
Fuel tank 11.6 U.S. gal 44 ltr
Hydraulic tank 3.7 U.S. gal 14 ltr
Engine 1.3 U.S. gal 5 ltr
Coolant 0.9 U.S. gal 3.3 ltr
Operating Weight (approximate)
Operating weight(with ROPS canopy and rubber shoe) 6,460 lb 2930 kg
Blade
Width x height 5'1" x 1'1" 1550 x 325 mm

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics