Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Sylvester, Georgia

We deliver comprehensive heavy construction equipment rental solutions in Sylvester, every time. Opting for our unprecedented premier service is easy – just ring us on the toll free number or submit a message through the contact form on the right.

You can narrate your construction equipment requirements to us, tell us whether you need transportation services as well, and we will put you in touch with the right vendor in no time! Here, we do not operate as order takers only. We are an organization powered by years of first-hand experience in the construction industry and operate as problem solvers for construction industry players like you!

Do you need skid steers, excavators, boom lifts, etc. or construction tools and supplies for a major construction project or just want to equipment on rent on a job-to-job basis, we’ve got you covered! The inventory of equipment in Sylvester is more than enough to meet your requirements.

Equipment Rental Sylvester, Construction equipment rental Sylvester, Construction Sylvester, Heavy Equipment Rental Sylvester.

Komatsu Trucks HD325-7
HD325-7 Off-Highway Truck

The HD325-7 is a 40 ton capacity workhorse. Very maneuverable, the MacPherson front suspension give the HD325-7 a turning radius tighter than other trucks in its class. With two working modes the operator can most effectively take advantage of the fully automatic seven speed transmission with lock-up feature. A hydropneumatic suspension gives the operator a comfortable ride while maintaining more material in the bed for more production.

Engine
Model KOMATSU SAA6D140E-5
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, air-to-air after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.5" x 6.5" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Horsepower:
SAEJ1995 - Gross 518 HP 386 kW
ISO 9249 / SAEJ1349 - Net 498 HP 371 kW
Rated rpm 2,000 rpm
Fan drive type Mechanical
Maximum torque 1,600 lb•ft 221 kg-m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system : Full-flow type
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner, plus dust indicator
EPA Tier 3 and EU Stage 3A emission certified.
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission: Full-automatic, planetary type
Speed range 7 speeds forward and 1 reverse
Lockup clutch Wet, single-disk clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive
Shift control Electronic shift control with automatic clutch modulation in all gears
Maximum travel speed 43.5 mph 70 km/h
Axles
Rear axle Full-floating
Final drive Planetary gear
Ratios:
Differential 3.125
Planetary 4.737
Suspension System
Type Fully hydraulic power steering with two double-acting cylinder
Supplementary steering Manual control (meets ISO 5010, SAE J1511 and SAE J53)
Auxiliary steering SAE automatic
Minimum turning radius 23'7'' 7.2 m
Maximum steering angle 43°
Cab
Dimensions comply with ISO 3471 and SAE J1040-1988c ROPS (Roll-Over Protective Structure) standards.
Main Frame
Type Box-sectioned structure
Brakes
Brakes meet ISO 3450 and SAE 1473 standards
Service brakes:
Front Full-hydraulic control, caliper disc type
Rear full-hydraulic, oil-cooled, multiple-disc type
Parking brake Spring applied, multiple-disc type
Retarder Oil-cooled, multiple-disc rear brakes act as retarder
Secondary brake Manual pedal operation When hydraulic pressure drops below the rated level, parking brake is automatically actuated
Brake surface
Front 50 in 2 968 cm2
Rear 7,881 in 2 50847 cm2
Body
Capacity:
Struck 23.5 yd3 18 m3
Heaped (2:1 ,SAE) 31.4 yd3 24 m3
Payload, maximum 40 U.S. tons 36.5 metric tons
rated 35 U.S. tons 32 metric tons
Material : (high-tensile-strength steel) 184,860 ps 130 kg/mm2
Structure V-shape body
Material thickness:
Bottom
Struck 0.75" 19 mm
Front 0.47" 12 mm
Sides 0.35" 9 mm
Target area (inside length x width) 18'1" x 11'1" 5500 mm x 3380 mm
Dumping angle 48°
Height at full dump 26'0" 7925 mm
Heating Exhaust heating
HyDRaulic System
Hoist cylinder Twin, 2-stage telescopic type
Relief pressure 2,990 psi 210 kg/cm2
Hoist time 10 sec
Weight
Empty weight 69,700 lb 31600 kg
Gross vehicle weight with 32 metric ton (35 U.S.ton) payload 140,390 lb 63680 kg
Max. gross vehicle weight:
Standard tire 152,740 lb 69280 kg
Not to exceed max. gross vehicle weight, including options, fuel
Weight distribution:
Empty: Front axle 51.7%
Rear axle 48.3%
Loaded: Front axle 33%
Rear axle 67%
tires
Standard Tires 18.00-33-32PR
Service Refill Capacities
Fuel tank 127.9 U.S. Gal 484 ltr.
Engine oil 13.2 U.S. Gal 50ltr
Torque converter, transmission and retarder cooling 23.8 U.S. Gal 90 ltr
Differential 11.9 U.S. Gal 45 ltr
Final drive (left and right) 7.9 U.S. 30 ltr
Hydraulic system 34.1 U.S. gal 129 ltr
Suspension (total) 11.7 U.S. gal 44.2 ltr

Komatsu Excavators PC1250LC-8 MH
PC1250LC-8 MH Material Handler (55'-70' Reach)

If you have a material handling application that needs high lift and plenty of lifting power, the PC1250LC-8 MH requires a closer look. An elevated cab, with tiltable structure for service access, and up to a 70 - two piece front give the PC1250LC-8 MH tremendous operating range.

Engine
Model Komatsu SAA6D170E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 6.69" 170 mm
Stroke 6.69" 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 (Gross) 688 HP 514 kW
ISO 9249 / SAE J1349 - Net 672 HP 502 kW
Hydraulic fan at maximum speed / Net 620 HP 463 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic, variable speed, reversible
EPA Tier 3 and EU stage 3A emission certified.
Hydraulics System
Type Electronic Open-center Load Sensing System (EOLSS)
Number of selectable working modes 2
Main pump:
Type Variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow
For implement and travel 2 x 494 ltr/min 2 x 130.5 U.S. gpm
For swing 1 x 600 ltr/min 1 x 158.5 U.S. gpm
Sub-pump for control circuit Gear pump
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 3,910 psi 27.0 MPa 275 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders Bore x Stroke bore x stroke
Boom / 2 8.9" x 94.1" 225 mm x 2390 mm
Arm / 1 10.0" x 110.0" 254 mm x 2794 mm
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 5.5 rpm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 154,320 lb 70000 kg / 686 kN
Gradeability 70%
Maximum travel speed:
High 2.0 mph 3.2 km/h
Low 1.3 mph 2.1 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 55 each side
No. of carrier rollers 3 each side
No. of track rollers 10 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 359.3 US gal 1360 ltr
Radiator 37.5 US gal 142 ltr
Engine 22.7 US gal 86 ltr
Final drive, each side 5.5 US gal 21 ltr
Swing drive 2 x 6.4 US gal 2 x 24.3 ltr
Hydraulic tank 177.0 US gal 670 ltr
PTO 3.6 US gal 13.5 ltr
Operating Weight (approximate)
Operating weight w/o Grapple:
55' / 16.8 m 244,418 lb 110868 kg
70' / 21.3 m 279,157 lb 126626 kg

Komatsu Excavators PC290LC-11
PC290LC-11 Hydraulic Excavator

A long reach arm and boom combined with a heavy duty undercarriage provide extended reach with a stable and reliable platform.
Enhanced controller logic and new Tier 4 Final engine technology improve performance and fuel efficiency.

Engine
Model Komatsu SAA6D107E-3*
Type Water-cooled, 4-cycle, direct injection
Aspiration Komatsu variable geometry turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 107 mm 4.21''
Stroke 124 mm 4.88''
Piston displacement 6.69 ltr 408 in³
Horsepower: All-speed, electronic
SAE J1995 : Gross 159 kW 213 HP
ISO 9249/SAE J1349 : Net 147 kW 196 HP
Rated rpm 2050 rpm
Fan drive type Mechanical
Governor All-speed control, electronic.
*EPA Tier 4 Final emissions certified
Hydraulics System
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 479 ltr/min 126.5 U.S. gal/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 380 kgf/cm²/ 37.3 MPa 5,400 psi
Travel circuit 380 kgf/cm² / 37.3 MPa 5,400 psi
Swing circuit 295 kgf/cm²/ 28.9 MPa 4,190 psi
Pilot circuit 33 kgf/cm² / 3.2 MPa 470 psi
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 140 mm x 1300 mm x 100 mm 5.5" x 51.2" x 3.9"
Arm / 1 150 mm x 1635 mm x 110 mm 5.9" x 64.3" x 4.3"
Bucket / 1 140 mm x 1009 mm x 100 mm 5.5" x 39.7" x 3.9"
Drives & Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 249 kN / 25400 kg 56,000 lb
Gradeability 70% 35°
Maximum travel speed: (Auto-Shift)
High 5.5 km/h 3.4 mph
Mid 4.1 km/h 2.5 mph
Low 3.0 km/h 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Driven method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 10.5 rpm
Swing torque 8889 kg•m 64,292 ft lbs
Undercarriage
Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 400 ltr 105.7 U.S. gal
Coolant 36 ltr 9.5 U.S. gal
Engine 23.1 ltr 6.1 U.S. gal
Final drive, each side 8.5 ltr 2.2 U.S. gal
Swing drive 7.2 ltr 1.9 U.S. gal
Hydraulic tank 132 ltr 34.9 U.S. gal
Hydraulic system 250 ltr 66.0 U.S. gal
DEF tank 23.0 ltr 6.07 U.S. gal
Operating Weight (approximate)
Operating weight, including 6150 mm 20'2" one-piece boom, 3200 mm 10'6" arm, SAE heaped 1.41 m³ 1.85 yd³ backhoe bucket*, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Shoes 700 mm 28"
Operating Weight 30570 kg 67,395 lb
Ground Pressure 0.54 kg/cm² 7.71 psi
Shoes 800 mm 31.5''
Operating Weight: 30950 kg 68,233 lb
Ground Pressure 0.48 kg/cm² 6.83 psi
Shoes 850 mm 33.5"
Operating Weight: 31141 kg 68,654 lb
Ground Pressure 0.45 kg/cm² 6.47 psi
Component Weights
Arm including bucket cylinder and linkage
3200 mm 10'6" arm assembly 1432 kg 3,157 lb
3500 mm 11'6" arm assembly 1504 kg 3,316 lb
One piece boom including arm cylinder
6150 mm 20'2" boom asssembly 2448 kg 5,397 lb
Boom cylinders x 2 231 kg 509 lb
Counterweight 5510 kg 12,148 lb
1.41 m³ 1.85 yd³ bucket - 48" width 1088 kg 2,399 lb

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics