Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Hakalau, Hawaii

We cater to do-it-yourselfers, local contractors, and large scale enterprises operating in residential and commercial construction industries. Whether you need just one or two dozers or excavators at the jobsite in Hakalau or you need an entire fleet of heavy machinery for an ongoing project, our vendors would be able to meet all of your requirements.

While you may have planned everything much in advance, it is possible that you need to opt for heavy construction equipment rental in Hakalau at the last minute. Even on these occasions, we’d be able to put you in touch with vendors who can provide necessary construction equipment and even transport it to your premises or the jobsite within few hours or a day at most.

Contact us today! You can dial the toll free number or contact us by submitting the contact form on the right. We will get back to you ASAP.

Equipment Rental Hakalau, Construction equipment rental Hakalau, Construction Hakalau, Heavy Equipment Rental Hakalau.

When selecting a Scissor Lift Rental unit in Del Valle, there is a multitude of factors that need attention. Just knowing the weight of the objects to be carried by the forklift is not enough. You must also determine the lift height, calculate the required turning radius, and also pay attention to the benefits of renting over purchasing.

But as simple as these things may sound, the process is complicated. Many managers may have to rely upon opinions given by forklift operators. Alternately, you can seek advice from experts at HeavyRentals.Equipment. We have an experienced team on board who can match you against the best Scissor Lift Rental companies in Del Valle. They can give you an accurate idea of the capacity of the different brands and their machines.

We make it more convenient for our clients to get access to reliable Scissor Lift Rental in Del Valle. We do this in two simple ways - depending upon your requirement, we can ask some pre-screened vendors in your area to get in touch with you, or we can provide you with their contact details, and help you establish direct contact with them. You choose!

We have a network of vendors with presence in more than 5,000 US locations. So, irrespective of how varied your forklift requirements are or where you are located, we may be able to help you out.

When you hire forklift for rental from one of our dealers, you can be rest assured that it follows all safety standards, and has been thoroughly inspected. Our vendors also offer a pick-drop-service for forklifts.

The right forklift can greatly enhance your efficiency and a wrong decision can be a waste of time and money. Don't take that chance and call our experts right away. We will offer you the best-suited advice for your business. With our help, you will be able to choose the best Scissor Lift Rental company in Del Valle in no time.

Finding the latest, well-maintained and completely tested equipment, whether for lifting goods at a warehouse or at construction sites is not exactly easy. We know that contractors and business owners face this problem time and again when the need boom lifts on rent in Rosebud or elsewhere.

It was for solving these problems that HeavyRentals.Equipment platform was created! Today, we are proud of the fact that we service thousands of locations all across the United States including Rosebud.

So, the next time you need electric, diesel or gas boom lifts on rent in Rosebud, you can always count on HeavyRentals.Equipment!

You can always expect prompt delivery service, flexible rental duration options, and even site inspections (if that's required). In case there are any urgent callouts, we are here to make emergency services available as well.

Please call us at the number listed above or fill up the inquiry form available, here at HeavyRentals.Equipment. You'd be able to glance through the best deals on boom lift rentals within few hours, instead of having to spend several days of your precious time on calling up and filtering out numerous rental companies.

Komatsu Dozers D375A-6
D375A-6 Crawler Dozer

The D375A-6 is a great combination of power and balance; power for digging and pushing, balance for stability on slopes and for ripping. Giant or multi-shank rippers are available as is a wide lighting and maintenance options specifically designed for the demands of the mining industry. A lock-up torque converter lets the D375A-6 to shift into direct drive when pushing to increase speed and production.

Model Komatsu SAA6D170E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1,413 in³ 23.15 ltr
Governor All-speed and mid-range, electronic
SAE J1995 - Gross 636 HP 474 kW
ISO 9249/SAE J1349 - Net 610 HP 455 kW
Hydraulic fan at maximum speed - Net 580 HP 433 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear Forward Reverse
1st 2.2 mph 3.5 km/h 2.9 mph 4.6 km/h
2nd 4.2 mph 6.8 km/h 5.5 mph 8.9 km/h
3rd L 5.0 mph 8.0 km/h 6.0 mph 9.7 km/h
3rd 7.3 mph 11.8 km/h 9.8 mph 15.8 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
Steering System
PCCS, joystick controlled, wet multiple-disc steering clutches are spring-loaded and hydraulically released.Wet multiple-disc, pedal/lever controlled steering brakes are spring-actuated hydraulically released and require no adjustment. Steering clutches and brakes are interconnected for easy, responsive steering.
Minimum turning radius 13'9" 4.2 m
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Cylindrical, high-tensile-strength steel construction
Rollers and idlers Lubricated track rollers
K-Bogie undercarriage Lubricated track rollers are resiliently mounted to the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.
Extreme service track shoes Lubricated tracks. Unique seals prevent entry of foreign abrasives into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
Number of shoes (each side) 41
Grouser height:
Single grouser 3.7" 93 mm
Shoe width (standard) 24" 610 mm
Ground contact area 7,527 in² 48560 cm²
Ground pressure (tractor) 15.6 psi 108 kPa / 1.10 kg/cm²
Number of track rollers 8
Number of carrier rollers 2
Extreme service shoes: Ground contact area: Ground** pressure:
24'' / 610 mm Additional weight - 0 lb / 0 kg 7,527 in² 48560 cm² 21.0 psi 1.48 kgf/cm² / 145 kPa
28'' / 710 mm Additional weight - 1,500 lb / 680 kg 8,760 in² 56520 cm² 18.2 psi 1.28 kgf/cm² / 126 kPa
32'' / 810 mm Additional weight - 3,000 lb / 1360 kg 9,990 in² 64480 cm² 16.0 psi 1.13 kgf/cm² / 111 kPa
** Ground pressure based on tractor, Semi-U tilt dozer, giant ripper, cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
Coolant and Lubricant Capacity (refill)
Fuel tank 317.0 U.S. gal 1200 ltr
Coolant 31.7 U.S. gal 120 ltr
Engine 22.7 U.S. gal 86 ltr
Torque converter, transmission, bevel gear, and steering system 39.6 U.S. gal 150 ltr
Final drive (each side) 17.1 U.S. gal 65 ltr
Operating Weight
Tractor weight Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 117,290 lb 53200 kg
Including Semi-U tilt dozer, giant ripper, cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 157,940 lb 71640 kg
Ground pressure 21.0 psi 1.48 kg/cm² / 145 kPa
Hydraulic System
Hydraulic control unit:
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit::
All spool control valves externally mounted beside the hydraulic tank. Variable piston pump with capacity (discharge flow) of 366 ltr/min / 96.7 U.S. gal/min for implement at rated engine rpm.
Relief valve setting . . . for implement 3,980 psi 27.5 MPa 280 kg/cm²
Control valves:
Spool control valves for Semi-U tilt dozer and Full-U tilt dozer.
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
• Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders:
Double-acting, piston
Number of cylinders: Bore:
Blade lift 2 5.5" / 140 mm
Blade tilt 1 7.1" / 180 mm
Ripper lift 2 7.9" / 200 mm
Ripper tilt 2 7.1" / 180 mm
Hydraulic oil capacity (refill):
Semi-U dozer or U dozer 34.4 U.S. gal 130 ltr
Giant ripper (variable) 11.9 U.S. gal 45 ltr
Multi-shank ripper (variable) 11.9 U.S. gal 45 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics