Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Kealia, Hawaii

We cater to do-it-yourselfers, local contractors, and large scale enterprises operating in residential and commercial construction industries. Whether you need just one or two dozers or excavators at the jobsite in Kealia or you need an entire fleet of heavy machinery for an ongoing project, our vendors would be able to meet all of your requirements.

While you may have planned everything much in advance, it is possible that you need to opt for heavy construction equipment rental in Kealia at the last minute. Even on these occasions, we’d be able to put you in touch with vendors who can provide necessary construction equipment and even transport it to your premises or the jobsite within few hours or a day at most.

Contact us today! You can dial the toll free number or contact us by submitting the contact form on the right. We will get back to you ASAP.

Equipment Rental Kealia, Construction equipment rental Kealia, Construction Kealia, Heavy Equipment Rental Kealia.

Komatsu Dozer D275AX-5WH
D275AX-5WH
The D275AX-5WH is a dozer specially equipped to fill the requirements of the sanitary landfill market. Guarding like fore and aft striker bars, belly pan with electric winch, chassis seal package and seal guards on the final drives, pivot shafts and idlers provide the protection needed in the severe landfill environment. Hydrostatic steering gives the D275AX-5SL the maneuverability required on a landfill and the lock-up torque converter provides the pushing power needed while still saving fuel.

Specification
Net Horsepower 410 HP 306 kw
Operating weight (Approx.) 116,528 lb** 52856 kg**
Engine Model Komatsu SAA6D140E-5
Rated Engine RPM 2000
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Track rollers (each side) 7
Carrier rollers (each side) 2
Width of standard track shoe 24" 610 mm
Length of track on ground 2000 rpm
Fan drive type 11'5" 3480 mm
Ground contact area (with standard shoe) 6,580 in² 42456 cm²
Track gauge 7'5" 2260 mm
** with Full-U Blade
Note: Operating weight includes blade indicated, landfill counterweight, steel cab, ROPS, operator, standard equipment, landfill package, rated capacity of lubricant, coolant, and full fuel tank.


Even less of a good thing.

Like its bigger E-Series John Deere Skid Steer siblings, the 313 delivers best-in-class stability, visibility, and serviceability. Lightweight and agile, yet surprisingly powerful, this highly capable compact is the perfect size for confined areas. Easy to transport between jobsites, too. So you can get more done, more reliably, for less. Features such as heavy-duty drive chains that never need adjustment, easy-to-fill large-capacity fuel tank, and a self-cleaning, no-grease Quik-TatchTM ensure it's as easy to maintain as it is to run. Plus, this little dynamo is highly versatile. Equip it with any of the many Worksite ProTM attachments, and watch productivity take off.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech E 4045HT072
Net Power, kW (hp) @ Rated rpm 33.5 (45) @ 2400
Gross power, kW (hp) 36.5 (49)
Net peak torque, N-m (lb-ft) 188 (139)
Displacement, L (cu in) 2.4 (149)
Engine aspiration Turbo
Fuel capacity, L (gal) 66 (17.5)
HYDRAULIC sYSTEM
Standard pump flow, L/min (gpm) 57 (15)
Optional high flow, L/min (gpm) not published
System pressure, kPa (psi) 23787 (3450)
Hydraulic power, kW (hp) 22.37 (31)
Optional high flow hydraulic power, kW (hp) not published
PERFORMANCE
SAE rated operating capacity, kg (lb) 572 (1260)
SAE ROC with optional counterweight, kg (lb) 636 (1400)
Tipping Load, standard, kg (lb) 1146 (2525)
Breakout Force Boom, kN (lb) 12.4 (2800)
Breakout Force Bucket, kN (lb) 14.6 (3300)
Vertical lift geometry Radial

 

dRIVE tRAIN
Maximum Ground Speed, standard, kph (mph) 10.9 (6.8)
Two Speed Transmission Ground Speed, kph (mph) not published
Drive Chain Rating 80
Axle Torque, Nm (lb-ft) 4651 (3420)
Tire size - Standard 10 x 16.5
DIMENSIONS
Length with Bucket, mm (in) 3140 (124)
Length without Bucket, mm (in) 2440 (96)
Width without Bucket, mm (in) 1500 (59)
Height to ROPS, mm (in) 1960 (77)
Height to Hinge Pin, mm (in) 2770 (109)
Dump Height, mm (in) 2130 (84)
Dump Reach, mm (in) 580 (23)
Dump Angle, degrees 40°
Bucket Rollback @ ground, degrees 30°
Wheelbase, mm (in) 950 (38)
Ground Clearance, mm (in) 193 (7.6)
Angle of Departure, degrees 26
wEIGHT
SAE Operating weight, kg (lb) 2338 (5150)

Komatsu Dozers D65WX-17 WH

D65WX-17 WH Waste Handling Dozer

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics