Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Lahaina, Hawaii

We cater to do-it-yourselfers, local contractors, and large scale enterprises operating in residential and commercial construction industries. Whether you need just one or two dozers or excavators at the jobsite in Lahaina or you need an entire fleet of heavy machinery for an ongoing project, our vendors would be able to meet all of your requirements.

While you may have planned everything much in advance, it is possible that you need to opt for heavy construction equipment rental in Lahaina at the last minute. Even on these occasions, we’d be able to put you in touch with vendors who can provide necessary construction equipment and even transport it to your premises or the jobsite within few hours or a day at most.

Contact us today! You can dial the toll free number or contact us by submitting the contact form on the right. We will get back to you ASAP.

Equipment Rental Lahaina, Construction equipment rental Lahaina, Construction Lahaina, Heavy Equipment Rental Lahaina.

New Holland Skid Steer Loader L221

New Holland Skid Steer Loader L221
MORE DIGGING AND PUSHING POWER BY DESIGN
New Holland Skid Steer Loader model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model FPT/F5H FL463
Bore/stroke, in (mm) 3.9x4.3 (99x110)
Displacement, in3 (L) 207 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged with external CEGR
Horsepower per SAE J1349 Gross hp (kW) 74 (55) @2500 rpm
Horsepower per SAE J1349 Net hp (kW) 68 (51) @ 2500 rpm
Peak torque, lb-ft (Nm) 232 (314) @ 1400 rpm
Power Train
Travel speed, low range, mph (km/h) 7.8 (12.5)
Travel speed, high range (optional),mph (km/h) 11.4 (18.3)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 123 (3124)
Top of ROPS, in (mm) 78.7 (1998)
Bottom of level bucket, fully raised,in (mm) 116.1 (2950)
Overall length without attachment with coupler, in (mm) 105.1 (2669)
Dump angle, degrees 40°
Dump reach (max height), in (mm) 20.3 (517)
Rollback, bucket on ground, degrees 31°
Rollback, bucket at full height, degrees 99°
Wheelbase, in (mm) 44.4 (1128)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 25°
Clearance circle without bucket, in(mm) 50.7 (1289)
Clearance circle rear, in (mm) 62.9 (1599)
Rear axle to bumper, in (mm) 36.4 (924)
Overall width, in (mm) 69.1 (1755)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 24.2 (91.5)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 33.2 (125.7)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2100 (905)
Tipping load, lbs (kg) 4000 (1814)
Breakout force, lift cylinder, lbs (kN) 4570 (20.3)
Breakout force, bucket cylinder, lbs (kN) 7270 (32.3)
Operating weight, lbs (kg) 6970 (3160)

John Deere Skid Steer 320E
More than flash.
The 320E looks great, but there's substance to its style. The optimized boom design provides improved bucket breakout performance throughout the lift path. You also get more reach at truck bed height and more lift height to the hinge pin. We rerouted the auxiliary hydraulic lines to better protect them and added connect-under-pressure couplers. The engine side shields attach more securely. Automotive-style courtesy lighting can be preset to stay on for up to a 90-second interval before shutting down after the operator exits the machine. How's that for shedding some light on the subject? And there are many new options, such as ride control and keyless start to make your day smoother and more productive. The 320E's engine is certified to EPA Final Tier 4 emissions standards and features automatic cleaning without impacting machine operation in most conditions.

Engine
Emission Rating Tier 4
Engine Make / Engine Model Yanmar / 4TNV98C
Net Power, kW (hp) @ Rated rpm 49.4 (66) @ 2500
Gross power, kW (hp) 51.7 (69)
Net peak torque, N-m (lb-ft) 241 (178)
Displacement, L (cu in) 3.3 (201)
Engine aspiration Naturally Aspirated
Fuel capacity, L (gal) 76 (20)
HYDRAULIC sYSTEM
Standard pump flow, L/min (gpm) 76 (20)
Optional high flow, L/min (gpm) 106 (28)
System pressure, kPa (psi) 22408 (3250)
Hydraulic power, kW (hp) 28.102 (37.6)
Optional high flow hydraulic power, kW (hp) 39.196 (52.5)
PERFORMANCE
SAE rated operating capacity, kg (lb) 994 (2190)
SAE ROC with optional counterweight, kg (lb) 1067 (2350)
Tipping Load, standard, kg (lb) 1989 (4380)
Breakout Force Boom, kN (lb) 15.5 (3500)
Breakout Force Bucket, kN (lb) 26.6 (6000)
Vertical lift geometry Vertical

 

DRIVE TRAIN
Maximum Ground Speed, standard, kph (mph) 11.1 (6.9)
Two Speed Transmission Ground Speed, kph (mph) 17.9 (11.1)
Drive Chain Rating 80
Axle Torque, Nm (lb-ft) 6771 (4994)
Tire size - Standard 12 x 16.5
DIMENSIONS
Length with Bucket, mm (in) 3470 (136.8)
Length without Bucket, mm (in) 2850 (112)
Width without Bucket, mm (in) 1760 (69.2)
Height to ROPS, mm (in) 2020 (79.4)
Height to Hinge Pin, mm (in) 3090 (121.5)
Dump Height, mm (in) 2460 (96.9)
Dump Reach, mm (in) 740 (29)
Dump Angle, degrees 43
Bucket Rollback @ ground, degrees 33
Wheelbase, mm (in) 1130 (44.3)
Ground Clearance, mm (in) 220 (8.5)
Angle of Departure, degrees 28
wEIGHT
SAE Operating weight, kg (lb) 3246 (7150)

John Deere COMPACT TRACK LOADER 319E

More than flash.

The 319E looks great, but there's substance to its style. The optimized boom design provides improved bucket breakout performance throughout the lift path. You also get more reach at truck bed height and more lift height to the hinge pin. We rerouted the auxiliary hydraulic lines to better protect them and added connect-under-pressure couplers. The engine side shields attach more securely. Automotive-style courtesy lighting can be preset to stay on for up to a 90-second interval before shutting down after the operator exits the machine. How's that for shedding some light on the subject? And there are many new options, such as ride control and keyless start to make your day smoother and more productive. The 319E's engine is certified to EPA Final Tier 4 emissions standards and features automatic cleaning without impacting machine operation in most conditions.

Engine
Emission Rating Tier 4
Engine Make / Engine Model Yanmar / 4TNV98C
Net Power, kW (hp) @ Rated rpm 49.4 (66) @ 2500
Gross Power, kW (hp) 51.7 (69)
Net Peak Torque, N-m (lb-ft) 241 (178)
Displacement, L (cu in) 3.3 (203)
Engine Aspiration Naturally Aspirated
Fuel Capacity, L (gal) 76 (20)
HYDRAULIC SYSTEM
Standard Pump Flow, L/min (gpm) 57 (15)
Optional High Flow, L/min (gpm) not published
System Pressure, kPa (psi) 22408 (3250)
Hydraulic power, kW (hp) 21.077 (28.2)
Optional high flow hydraulic power, kW (hp) not published
PERFOMANCE
SAE Rated Operating Capacity, kg (lb) 976 (2150)
Tipping Load, standard, kg (lb) 2789 (6143)
Breakout Force Boom, kN (lb) 15.5 (3500)
Breakout Force Bucket, kN (lb) 26.6 (6000)
Vertical lift geometry Vertical
DRIVE TRAIN
Maximum Ground Speed, standard, kph (mph) 9.3 (5.8)
Two Speed Transmission Ground Speed, kph (mph) not published
Standard Rubber Track Width mm (in) 320 (12.6)
Ground Pressure, Standard Track, kPa (psi) 39.3 (5.7)
Track Guage, center to center, mm (in) 1500 (59.2)
DIMENTIONS
Length with Bucket, mm (in) 3470 (136.8)
Length Without Bucket, mm (in) 2850 (112)
Width Without Bucket, mm (in) 1820 (71.8)
Height to ROPS, mm (in) 2050 (80.6)
Height to Hinge Pin, mm (in) 3120 (122.8)
Dump Height, mm (in) 2500 (98.4)
Dump Reach, mm (in) not published
Dump Angle, degrees 42
Bucket Rollback @ ground, degrees 32
Ground Clearance, mm (in) 250 (9.8)
Angle of Departure, degrees 31.4
WEIGHT
SAE Operating Weight, kg (lb) 4286 (9440)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics