Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in M C B H Kaneohe Bay, Hawaii

We cater to do-it-yourselfers, local contractors, and large scale enterprises operating in residential and commercial construction industries. Whether you need just one or two dozers or excavators at the jobsite in M C B H Kaneohe Bay or you need an entire fleet of heavy machinery for an ongoing project, our vendors would be able to meet all of your requirements.

While you may have planned everything much in advance, it is possible that you need to opt for heavy construction equipment rental in M C B H Kaneohe Bay at the last minute. Even on these occasions, we’d be able to put you in touch with vendors who can provide necessary construction equipment and even transport it to your premises or the jobsite within few hours or a day at most.

Contact us today! You can dial the toll free number or contact us by submitting the contact form on the right. We will get back to you ASAP.

Equipment Rental M C B H Kaneohe Bay, Construction equipment rental M C B H Kaneohe Bay, Construction M C B H Kaneohe Bay, Heavy Equipment Rental M C B H Kaneohe Bay.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

LiftPod® Personal Portable Lift FS60

JLG LiftPod® Personal Portable Lift FS60

Key Specs

  • Machine Width:2 ft 6 in. / 0.76 m
  • Platform Height:5 ft 8 in. / 1.73 m

Key Features

  • 30" wide base rolls through standard width interior doors, allowing the unit to be moved from location to location fully assembled
  • Non-marking caster wheels added to rear of machine to optimize mobility in tight spaces
  • Lifting lever extends a third wheel for easy maneuvering of the LiftPod. Standing on the base retracts the wheel
Dimensional Data
Ground Entry Height 8 in. / 0.21 m
Machine Height 7 ft 9 in. / 2.36 m
Machine Length 3 ft 8 in. / 1.12 m
Machine Width 2 ft 6 in. / 0.76 m
Platform Dimension A 1 ft 10 in. / 0.56 m
Platform Dimension B 2 ft / 0.61 m
Platform Height 5 ft 8 in. / 1.73 m
Reach Specifications
Platform Height 5 ft 8 in. / 1.73 m
Working Height 12 ft 3 in. / 3.73 m
Performance
Maximum Lift Height 6 ft / 1.71 m
Outriggers or Stabilizers No
Platform Capacity 330 lb / 149.69 kg
General
Machine Weight 148 lb / 67.13 kg

Komatsu Wheel Loaders WA900-3
WA900-3 Wheel Loader

Power, stability and maneuverability. That's what you get with the 17.0 yd3, 856 hp, WA900-3. High stability when digging in the pile and when maneuvering, the WA900-3 is a production loader that can exceed your demands. Using the advanced joystick steering, the operator has the precise control and nimble feel to make him think he's operating a loader half its size.

Engine
Model Komatsu SAA12V140E-3
Type Water-cooled, 4 cycle
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 12
Bore x stroke 5.51'' x 6.50'' 140 mm x 165 mm
Piston displacement 1,860 in³ 30.48 ltr
Governor all-speed, electronic
Flywheel horsepower
SAE J1995 - Gross 900 HP 672 kW
ISO 9249/SAE J1349 - Net 856 PS 638 kW
Rated rpm 2050 rpm
Fan drive method for radiator cooling Mechanical
Fuel system Direct injection
Lubrication system
Method Gear pump, force-lubrication
Filter Full-flow and bypass combined
Air cleaner Dry type with automatic dust ejector and pre-cleaner, cyclopac with vacuator
EPA Tier 2 emissions certified.
Transmission
Torque converter - Type 3-element, single-stage, single-phase
Transmission - Type Full-powershift, planetary type
Travel Speed*
1st Forward 4.3 mph 7.0 km/h
1st Reverse 4.4 mph 7.1 km/h
2nd Forward 7.6 mph 12.3 km/h
2nd Reverse 7.7 mph 12.4 km/h
3rd Forward 17.4 mph 28.0 km/h
3rd Reverse 17.6 mph 28.3 km/h
*Measured with 45/65-45, 58 PR (L-5)
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, full-floating
Rear Center-pin support, full-floating, 22° total oscillation
Reduction gear Spiral bevel gear
Differential gear Straight bevel gear
Final reduction gear Planetary gear, single reduction, oil bath
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Dry disc brake
Secondary brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 40° each direction
Minimum turning radius at the center of outside tire 30'2" 9200 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity / at rated rpm 83.2 U.S. gal/min 315 ltr/min
Relief valve setting 4,977 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 6.3" x 19.8" 160 mm x 503 mm
Loader control:
Hydraulic pump Piston pump
Capacity / at rated rpm 109.6 U.S. gal/min 415 ltr/min
Relief valve setting 4,977 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders—bore x stroke:
Boom cylinder - 2 10.2" x 53.9" 260 mm x 1368 mm
Bucket cylinder - 1 11.8" x 35.7" 300 mm x 906 mm
Control valve spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 11.2 sec
Dump 2.0 sec
Lower (Empty) 4.8 sec

Service Refill Capacities

ROPS and Cab
The cab is mounted on viscous damping mounts and is well insulated.
Cooling system 89.0 U.S. gal 337 ltr
Fuel tank 410.8 U.S. gal 1555 ltr
Engine 34.3 U.S. gal 130 ltr
Hydraulic system 191.5 U.S. gal 725 ltr
Axle (each front and rear) 95.1 U.S. gal 360 ltr
Torque converter and transmission 37.0 U.S. gal 140 ltr

John Deere Scraper Systems 1810C
1810C
The 1810C Carry-All Scraper is a four-tire scraper that carries 18 cu yd of material and has a 10-ft cut width. This scraper works well for construction contractors needing a narrow transport scraper and uses 360-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 12 cu yd
Heaped capacity cubic yards 18 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 27 ft 7 in. 8407 mm
Width, ft, in. (mm) 11 ft 9 in. 3581 mm
Height, ft, in. (mm) 8 ft 0 in. 2438 mm
Bucket dimensions --
Length, ft, in. (mm) 8 ft 10 in. 2692 mm
Width, ft, in. (mm) 10 ft 0 in. 3048 mm
Height, ft, in. (mm) 3 ft 10 in. 1168 mm
WEIGHT
Approximate shipping weight, lb (kg) 20,500 lb 9298 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 28%
Wheels 72%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 20.5
Option 1 NA
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 360 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard, 3 piece blades
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Not Approved
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Factory Installed Only
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics