get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Bayview,Idaho

Your search for a super quality, personalized construction equipment rental service in Bayviewcomes to a satisfactory end here!

With a wide network of trusted vendors and huge, ready-to-rent inventory of construction equipment, right from tools and supplies to heavy machinery, we are in a position to meet your varied needs in as little as one day!

Right after you call us at our toll free number or send a message through contact-form on the right, we will start looking for suitable vendors who've the necessary construction equipment. In case you need pick-and-drop services too, we will find vendors who can do the needful.

Throughout the process, our role is and has always been that of an assistance provider that connects contractors in need of heavy machinery and construction tools in Bayview with the best vendors. The process is very quick and in most cases, you will start receiving calls from vendors we match for your requirements within hours.

Equipment Rental Bayview, Construction equipment rental Bayview, Construction Bayview, Heavy Equipment Rental Bayview.

Unable to parse entered address. API response code: REQUEST_DENIED

Push Around Vertical Mast Lift 41AM

JLG Push Around Vertical Mast Lift 41AM
Key Specs

  • Machine Width: 2 ft 5 in. / 0.74 m
  • Platform Height: 40 ft 9 in. / 12.42 m

Key Features

  • Most rigid mast in the industry for operator comfort and stability
  • Six-wheel design for improved maneuverability
  • Long battery duty cycles and an automatic charger for more productivity
Dimensional Data
Wheel Size - Front Caster 6 x 2"
Ground Entry Height 1 ft 7 in. / 0.48 m
Machine Height 8 ft 8 in. / 2.64 m
Machine Length 4 ft 10 in. / 1.46 m
Machine Width 2 ft 5 in. / 0.74 m
Outrigger Footprint Length 6 ft 7 in. / 2.01 m
Outrigger Footprint Width 6 ft 7 in. / 2.01 m
Platform Dimension A 2 ft 2 in. / 0.66 m
Platform Dimension B 2 ft 2 in. / 0.65 m
Platform Height 40 ft 9 in. / 12.42 m
Wheel SIze - Rear 10 x 2"
Reach Specifications
Platform Height 40 ft 9 in. / 12.42 m
Working Height 47 ft / 14.33 m
Performance
Outriggers Up Max Lift Height 41 ft / 12.44 m
Outriggers or Stabilizers Yes
Platform Capacity 300 lb / 136.08 kg
General
Machine Weight-AC 1100 lb / 498.95 kg
Machine Weight-DC 1230 lb / 557.92 kg

Komatsu Dozer D85EX-15
D85EX-15
Hydrostatic steering makes the D85EX-15 very maneuverable for such a large, powerful dozer. Palm command controls for travel and equipment give the operator the precise control of a small dozer with the pushing power of a high production dozer.

Engine
Model Komatsu SAA6D125E-5
Type 4-cycle, water-cooled, direct injection
Aspiration 100 in³ Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.92" x 5.9" 125 mm x 150 mm
Piston displacement 674 in³ 11.04 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 266 HP 199 kW
ISO 9249 / SAE J1349* / Net 240HP 179 kW
Hydraulic fan at maximum speed / Net 240 HP 179 kW
Rated rpm 1900 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
EPA Tier 3 and EU stage 3A emissions certified.
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter and a planetary gear, multiple-disc clutch transmission which is hydraulically-actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral switch helps prevent accidental starts.
Travel speed: Forward: Reverse:
1st 2.1 mph
3.3 km/h		 2.7 mph
4.4 km/h
2nd 3.8 mph 6.1 km/h 5.0 mph 8.0 km/h
3rd 6.3 mph 10.1 km/h 8.1 mph 13.0 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket rims are bolt-on for easy replacement.
Steering System
PCCS lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn.Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius 6'6" 1.99 m
Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Track shoes Lubricated tracks. Unique seals prevent entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 7
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 2.8" 72 mm
Shoe width (standard) 22" 560 mm
Ground contact area 5295 in² 34160 cm²
Ground pressure(with dozer, cab and ROPS) 10.7 psi 0.75 kg/cm² / 73.6 kPa
Track gauge 6'7" 2000 mm
Length of track on ground 10' 3050 mm
Coolant and Lubricant Capacity (refill)
Fuel tank 129 U.S. gal 490 ltr
Coolant 15.3 U.S. gal 58 ltr
Engine 10.0 U.S. gal 38 ltr
Torque converter, transmission, bevel gear, and steering system 15.9 U.S. gal 60 ltr
Final drive (each side) 6.9 U.S. gal 26 ltr
Operating Weight
Tractor weight:
Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 46,780 lb 21220 kg
Operating weight:
Including Semi-U tilt dozer or straight tilt dozer, multi-shank ripper, steel cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 61,950 lb 28100 kg
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control units: 2 x axial piston motors
All spool valves externally mounted beside the hydraulic tank. Plunger type hydraulic pump with capacity (discharge flow) of 195 ltr/min 51.5 U.S. gal/min at rated engine rpm.
Relief valve setting 3,270 psi 22.6 MPa230 kg/cm²
Control valves:
Spool control valves for tilt dozer:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for multi-shank ripper:
Ripper lift Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders: Bore Bore
Blade lift / 2 3.9" 100 mm
Blade tilt / 1 5.9" 150 mm
Ripper lift / 2 5.1" 130 mm
Hydraulic oil capacity (refill):
Straight tilt dozer 17.7 U.S. gal 67 ltr
Semi-U tilt dozer 17.7 U.S. gal 67 ltr
Ripper equipment (additional volume):
Multi-shank ripper 2.9 U.S. gal 11 ltr

KKomatsu Dozers D39PX-23
D39PX-23 Crawler Dozer
Fine grading. It requires a stable platform, precise and responsive hydraulics and easy to operate operator controls. The D39PX-23 scores top marks in all of those categories. The super slant nose design moves the coolers and hydraulic fan to the rear and the operator forward to create a balance that makes fine grading a snap. With its wide track, the D39PX-23 has a big, stable platform to work the blade off of, essential for fine grading. A fully hydrostatic drivetrain gives the operator incredibly quick and precise maneuverability. And new Power and Economy working modes allow the operator to adjust his machine's performance to his current job and save on fuel consumption as he's doing it. Like all Komatsu products, the D39PX-23 has the advanced hydraulics system to make the addition of a grade control system seamless and turn it from a great grading tractor to an incredibly precise and fast fine grading system.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 107 HP 79 kW
ISO 9249 / SAE J1349 - Net 105 HP 78 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic (reversible)
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h		 0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h		 0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h		 0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h		 0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius* 94" 2.4 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 6
Type of shoes (standard) Single grouser
Number of shoes (each side) 39
Grouser height 2.1" 53 mm
Shoe width (standard) 25" 635 mm
Ground contact area 4,616 in² 29782 cm²
Ground pressure
(with dozer, ROPS cab)		 4.70 psi 0.33 kgf/cm² / 31.7 kPa
Track gauge 5'11" 1810
Length of track on ground 7'8" 2345 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 15.8 U.S. gal 60 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,982 lb 8610 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 21,675 lb 9830 kg
hydraulic system
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Blade pitch 1 adjustable linkage
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:  
3-spool control valve for power angle tilt dozer.  
Positions:
Blade lift   Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics