Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Grangeville,Idaho

Your search for a super quality, personalized construction equipment rental service in Grangevillecomes to a satisfactory end here!

With a wide network of trusted vendors and huge, ready-to-rent inventory of construction equipment, right from tools and supplies to heavy machinery, we are in a position to meet your varied needs in as little as one day!

Right after you call us at our toll free number or send a message through contact-form on the right, we will start looking for suitable vendors who’ve the necessary construction equipment. In case you need pick-and-drop services too, we will find vendors who can do the needful.

Throughout the process, our role is and has always been that of an assistance provider that connects contractors in need of heavy machinery and construction tools in Grangeville with the best vendors. The process is very quick and in most cases, you will start receiving calls from vendors we match for your requirements within hours.

Equipment Rental Grangeville, Construction equipment rental Grangeville, Construction Grangeville, Heavy Equipment Rental Grangeville.


Even less of a good thing.

Like its bigger E-Series John Deere Skid Steer siblings, the 313 delivers best-in-class stability, visibility, and serviceability. Lightweight and agile, yet surprisingly powerful, this highly capable compact is the perfect size for confined areas. Easy to transport between jobsites, too. So you can get more done, more reliably, for less. Features such as heavy-duty drive chains that never need adjustment, easy-to-fill large-capacity fuel tank, and a self-cleaning, no-grease Quik-TatchTM ensure it's as easy to maintain as it is to run. Plus, this little dynamo is highly versatile. Equip it with any of the many Worksite ProTM attachments, and watch productivity take off.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech E 4045HT072
Net Power, kW (hp) @ Rated rpm 33.5 (45) @ 2400
Gross power, kW (hp) 36.5 (49)
Net peak torque, N-m (lb-ft) 188 (139)
Displacement, L (cu in) 2.4 (149)
Engine aspiration Turbo
Fuel capacity, L (gal) 66 (17.5)
HYDRAULIC sYSTEM
Standard pump flow, L/min (gpm) 57 (15)
Optional high flow, L/min (gpm) not published
System pressure, kPa (psi) 23787 (3450)
Hydraulic power, kW (hp) 22.37 (31)
Optional high flow hydraulic power, kW (hp) not published
PERFORMANCE
SAE rated operating capacity, kg (lb) 572 (1260)
SAE ROC with optional counterweight, kg (lb) 636 (1400)
Tipping Load, standard, kg (lb) 1146 (2525)
Breakout Force Boom, kN (lb) 12.4 (2800)
Breakout Force Bucket, kN (lb) 14.6 (3300)
Vertical lift geometry Radial

 

dRIVE tRAIN
Maximum Ground Speed, standard, kph (mph) 10.9 (6.8)
Two Speed Transmission Ground Speed, kph (mph) not published
Drive Chain Rating 80
Axle Torque, Nm (lb-ft) 4651 (3420)
Tire size - Standard 10 x 16.5
DIMENSIONS
Length with Bucket, mm (in) 3140 (124)
Length without Bucket, mm (in) 2440 (96)
Width without Bucket, mm (in) 1500 (59)
Height to ROPS, mm (in) 1960 (77)
Height to Hinge Pin, mm (in) 2770 (109)
Dump Height, mm (in) 2130 (84)
Dump Reach, mm (in) 580 (23)
Dump Angle, degrees 40°
Bucket Rollback @ ground, degrees 30°
Wheelbase, mm (in) 950 (38)
Ground Clearance, mm (in) 193 (7.6)
Angle of Departure, degrees 26
wEIGHT
SAE Operating weight, kg (lb) 2338 (5150)

New Holland Skid Steer Loader L213

Skid Steer Loader - L213

MORE DIGGING AND PUSHING POWER BY DESIGN
New Holland Skid Steer Loader model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model ISM / N844L
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135.2 (2.216)
Fuel injection Indirect
Air intake Naturally aspirated
Horsepower per SAE J1349 Gross hp (kW) 49 (36) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 46 (34) @ 2800 rpm
Peak torque, lb-ft (Nm) 105.5 (143) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.4 (11.9)
Travel speed, high range (optional), mph (km/h) NA
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 112 (2845)
Top of ROPS, in (mm) 75.5 (1919)
Bottom of level bucket, fully raised, in (mm) 105.6 (2682)
Overall length without attachment with coupler, in (mm) 95.9 (2435)
Dump angle, degrees 40°
Dump reach (max height), in (mm) 18.5 (469)
Rollback, bucket on ground, degrees 26°
Rollback, bucket at full height, degrees 95°
Wheelbase, in (mm) 37 (941)
Ground clearance (bottom of belly pan), in (mm) 7 (178)
Angle of departure, degrees 22°
Clearance circle without bucket, in (mm) 48.7 (1237)
Clearance circle rear, in (mm) 56.4 (1433)
Rear axle to bumper, in (mm) 33.8 (858)
Overall width, in (mm) 59.8 (1518)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 17.5 (66.2)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) -
Performance Specs
Rated operating load, 50% tip, lbs (kg) 1300 (590)
Tipping load, lbs (kg) 2600 (1179)
Breakout force, lift cylinder, lbs (kN) 2850 (12.7)
Breakout force, bucket cylinder, lbs (kN) 4180 (18.6)
Operating weight, lbs (kg) 5070 (2300)

John Deere Skid Steers 315
Lightweight agility, heavyweight ability.

Whether you're tiptoeing around zero lot lines, tending livestock, laboring indoors, or removing snow, this nimble skid steer won't have any trouble fitting in. Its small stature enables the 315 to slip comfortably through narrow openings and into tight quarters. Makes it easy to trailer and easy on turf, too. But this "lightweight" won't get pushed around. Optimal 60/40-weight distribution gives it the stability needed for handling heavy loads.
And its high-torque turbocharged 2.4L diesel won't throw in the towel when the going gets tough, either. With the 315, it's not the size of the John Deere skid steer in the fight, but the size of the fight in the skid steer.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / Power Tech 4024T
Net Power, kW (hp) @ Rated rpm 33.5 (45) @ 2400
Gross power, kW (hp) 36.5 (49)
Net peak torque, N-m (lb-ft) 188 (139)
Displacement, L (cu in) 2.4 (149)
Engine aspiration Turbo
Fuel capacity, L (gal) 66 (17.5)
HYDRAULIC sYSTEM
Standard pump flow, L/min (gpm) 61 (16)
Optional high flow, L/min (gpm) 95 (25)
System pressure, kPa (psi) 23787 (3450)
Hydraulic power, kW (hp) 23.94 (32.1)
Optional high flow hydraulic power, kW (hp) 37.29 (50)
PERFORMANCE
SAE rated operating capacity, kg (lb) 681 (1500)
SAE ROC with optional counterweight, kg (lb) 749 (1650)
Tipping Load, standard, kg (lb) 1362 (3000)
Breakout Force Boom, kN (lb) 17.3 (3900)
Breakout Force Bucket, kN (lb) 14.6 (3300)
Vertical lift geometry Radial

 

dRIVE tRAIN
Maximum Ground Speed, standard, kph (mph) 10.9 (6.8)
Two Speed Transmission Ground Speed, kph (mph) not published
Drive Chain Rating 80
Axle Torque, Nm (lb-ft) 5508 (4050)
Tire size - Standard 10 x 16.5
DIMENSIONS
Length with Bucket, mm (in) 3270 (129)
Length without Bucket, mm (in) 2570 (101)
Width without Bucket, mm (in) 1500 (59)
Height to ROPS, mm (in) 1960 (77)
Height to Hinge Pin, mm (in) 2910 (115)
Dump Height, mm (in) 2260 (89)
Dump Reach, mm (in) 540 (21)
Dump Angle, degrees 40°
Bucket Rollback @ ground, degrees 30°
Wheelbase, mm (in) 1040 (41)
Ground Clearance, mm (in) 193 (7.6)
Angle of Departure, degrees 23.5
wEIGHT
SAE Operating weight, kg (lb) 2361 (5200)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics