Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Hamer,Idaho

Your search for a super quality, personalized construction equipment rental service in Hamercomes to a satisfactory end here!

With a wide network of trusted vendors and huge, ready-to-rent inventory of construction equipment, right from tools and supplies to heavy machinery, we are in a position to meet your varied needs in as little as one day!

Right after you call us at our toll free number or send a message through contact-form on the right, we will start looking for suitable vendors who’ve the necessary construction equipment. In case you need pick-and-drop services too, we will find vendors who can do the needful.

Throughout the process, our role is and has always been that of an assistance provider that connects contractors in need of heavy machinery and construction tools in Hamer with the best vendors. The process is very quick and in most cases, you will start receiving calls from vendors we match for your requirements within hours.

Equipment Rental Hamer, Construction equipment rental Hamer, Construction Hamer, Heavy Equipment Rental Hamer.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

SkyTrak® Telehandler 6036

JLG SkyTrak® Telehandler 6036

 

Key Specs

  • Maximum Lift Capacity: 6000 lb / 2721.55 kg
  • Maximum Lift Height: 36 ft 1 in. / 11 m
  • Maximum Reach: 22 ft 4 in. / 6.81 m

Key Features

  • Optional attachments for high versatility in handling jobsite challenges
  • Sealed bearings extend service intervals for lower maintenance costs
  • Re-designed cab for improved operator comfort and safety
  • 4-speed modulated transmission for increased production and maneuverability
  • Machine design eliminates the need for liquid-filled tires
PERFORMANCE
Breakout Force 24500 lb / 11113.01 kg
Drawbar Pull 22000 lb / 9979.03 kg
Frame Leveling 10 Degrees
Lift Capacity at Full Height 6000 lb / 2721.55 kg
Lift Capacity at Max Reach (Stabs Up) 1800 lb / 816.47 kg
Load Center 2 ft / 0.61 m
Maximum Lift Capacity 6000 lb / 2721.55 kg
Maximum Lift Height 36 ft 1 in. / 11 m
Maximum Reach 22 ft 4 in. / 6.81 m
Outriggers or Stabilizers No
Outside Turning Radius 13 ft 9 in. / 4.19 m
Speed - Maximum Lift 15 sec.
Speed - Maximum Lower 10 sec.
Speed - Maximum Telescope In 15 sec.
Speed - Maximum Telescope Out 15 sec.
Speed - Maximum Travel 1 mph / 1.61 km/h
dimensional data
Ground Clearance 1 ft 4 in. / 0.41 m
Machine Height 8 ft 4 in. / 2.54 m
Machine Length 18 ft 1 in. / 5.51 m
Machine Width 8 ft 3 in. / 2.51 m
Tire Size 370/75-28
Track Width 7 ft / 2.13 m
Wheelbase 9 ft 5 in. / 2.87 m
power source
Capacity - Fuel Tank 35 gal. / 132.49 L
Engine Horsepower 85 hp / 63.41 kW
Engine Manufacturer Cummins
Engine Model QSB3.3L
Maximum Engine RPM 2600 rpm
General
Axle-Front High Bias, Limited Slip
Axle-Rear Oscillating
Function Pump Type Gear
Hydraulic System Pressure 3000 psi / 210.09 Kg/cm2
Operating Vehicle Weight 20095 lb / 9114.94 kg
Service Brake Type Wet Multi-Disc
Transmission - Nr Forward Gears Standard 4
Transmission - Nr Reverse Gears 3
Transmission Type Powershift

John Deere Wheel Loader 524K High-Lift Tier 3
ThinK. Again.

Although they don't appear all that different from their standard-setting predecessors, the K-Series Loaders are loaded throughout with even more customer-inspired enhancements: spacious, quieter cab with unsurpassed visibility, expanded sealed-switch module, secured key-less start, and easier-to-read LCD monitor with advanced onboard diagnostics.

You have more choices, too, including the 2¾-yard 524K, NeverGreaseTM pins, and automatic diff-lock axles, to list just a few. Exceptional productivity, long-term durability, unparalleled versatility - you get it all in the John Deere K-Series.

ENGINE
Engine Make / Engine Model John Deere / PowerTech E6068H
Emission Rating Tier 3
Net Power, kW (hp) @ Rated rpm 110 (146) @ 2000
Displacement, L (cu in) 6.8 (415)
Net Peak Torque, N-m (lb-ft) 607 (448)
Calculated % Torque Rise 47
ELECTRICAL
Voltage 24
Alternator amps 80
TRANSMISSION
Type Powershift
Max. Travel Speed - fwd, kph (mph) 36 (22.4)
Max. Travel Speed - rev, kph (mph) 24.1 (15)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Wet Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 165 (44)
System Pressure, kPa (psi) 24994 (3625)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 1.9 (2.5)
Bucket Capacity Max., cu m (cu yd) 2.1 (2.75)
Breakout Force, Std Bucket, kN (lb) 83.3 (18748)
Ride Control Optional
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 2.1 (2.75)
Tire Size Standard 20.5 R25
TIPPING LOAD
Straight, kg (lb) 8851 (19512)
Full Turn, kg (lb) 7656 (16879)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4120 (13 ft 6 in)
Dump Clear @ 45 deg, mm (ft in) 3120 (10 ft 3 in)
Reach @ 7', mm (ft in) 1730 (5 ft 8 in)
Reach @ Full Height, mm (ft in) 990 (3 ft 3 in)
Wheelbase, mm (ft in) 2930 (9 ft 7 in)
Clearance Circle, mm (ft in) 12080 (39 ft 8 in)
Overall Length, mm (ft in) 7670 (25 ft 2 in)
Height to Top of Cab, mm (ft in) 3250 (10 ft 8 in)
Ground Clearance, mm (in) 460 (18)
CAPACITIES
Fuel Tank, L (gal) 242 (64)
Hydraulic Reservoir, L (gal) 92 (24.3)
WEIGHT
SAE Operating Weight, kg (lb) 12623 (27829)
Metric Ton Weight, kg (lb) 12.623 (27.829)

cat lift trucks internal combustion pneumatic tire gp30nmGive your business a lift in productivity with the Cat 1,500 - 3,500 kg IC pneumatic tire lift trucks. With excellent travel speeds and powerful acceleration, the GP15NM-GP35NM / DP20NM-DP35NM series provides dependable performance with a highly-efficient fuel system for optimum productivity to meet your business' every need.

Quality

Quality

  • Presence Detection System (PDS) helps protect operators and loads by disengaging transmission and hydraulic functions when the operator leaves the normal seated position or the parking brake is not set
  • LED front work lights and rear combination lights burn brighter and last longer than conventional lights
  • Excellent travel speeds and powerful acceleration for greater productivity
  • Superior lift and lower speeds result in lower cycle times
  • Single speed Powershift automatic transmission provides high levels of torque to power the truck, while offering a smoother ride
  • Hydraulic power steering provides exceptionally lower steering effort than conventional steering systems
  • Informative LED/LCD display panel is mounted to the steering column and keeps operators informed
  • Designed to maximize operator comfort and minimize fatigue:
    • Generous floor area with through-the-floor pedal design, which helps promote natural motion
    • Return-to-set memory tilt steering column remembers operator preferences
    • Ergonomic controls are conveniently placed for easy access

Available Options

  • Fingertip hydraulic controls - offer precise control with near effortless motion
  • Full-suspension swivel seat - turns 12° to the right, allowing more natural movement for the operator when traveling in reverse
  • Swing down LP tank bracket - helps significantly reduce the effort it takes for an operator to change an LP tank
  • Seatbelt ignition interlock - engine will not run unless the operator is in the seat with the seat belt fastened
  • Closed operator cab - provides operator protection against the elements
  • Rear handle with horn button - better operator support when driving in reverse
  • Light and strobe packages for your specific applications
specs
MODEL Model Capacity (lbs.) Max Travel Speed* (mph) Engine (HP/rpm) Right Angle Stack* (in.) Turning Radius (in.) Lift Speed* (fpm) Lower Speed* (fpm) Length (in.) Width (in.) Height (in.) Weight (lbs.)
GP30NM 6,000 11.2 61/2700 113 93.7 102 98.4 107 50.2 85.5 9,400

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics