Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Preston,Idaho

Your search for a super quality, personalized construction equipment rental service in Prestoncomes to a satisfactory end here!

With a wide network of trusted vendors and huge, ready-to-rent inventory of construction equipment, right from tools and supplies to heavy machinery, we are in a position to meet your varied needs in as little as one day!

Right after you call us at our toll free number or send a message through contact-form on the right, we will start looking for suitable vendors who’ve the necessary construction equipment. In case you need pick-and-drop services too, we will find vendors who can do the needful.

Throughout the process, our role is and has always been that of an assistance provider that connects contractors in need of heavy machinery and construction tools in Preston with the best vendors. The process is very quick and in most cases, you will start receiving calls from vendors we match for your requirements within hours.

Equipment Rental Preston, Construction equipment rental Preston, Construction Preston, Heavy Equipment Rental Preston.

Toyota Forklifts 8HBE30

Electric Motor Forklift-8HBE30

Walkie/Rider

  • 6,000 - 8,000 lbs. Lifting Capacity

Featuring AC Drive System Technology, Toyota offers a wide range of 24 Volt, electric pallet jacks to meet your productivity needs. Industry leading levels of performance and reliability can be found in all of our walkie pallet, end-control walkie/rider, center control rider and tow tractor units. Attention to operator efficiencies and ease of service put overall equipment value to work for you.

ERGONOMICS
  • Multifunction Control Handle has ergonomically positioned dual thumb wheels with twist grips, lift, lower and horn buttons for simplified operation of all controls with either hand.
  • High-Speed Interlock allows the operator to maintain top travel speed without continuously pressing a button for long distance transport, increasing freedom of movement.
  • Low-platform step height eases frequent entry and exit during floor level order-picking for reduced body fatigue.
  • Polyurethane torsion block casters act as shock absorbers to improve operator ride comfort.
  • Rubber drive tire and polyurethane load wheels provide a smoother ride and longer tire life.
PERFORMANCE
  • AC drive system offers fast response to operating commands, precise power control, compact components and provides high productivity throughout the entire shift.
  • AC drive motor offers excellent acceleration and top travel speed, loaded or unloaded, while improving battery efficiency through regenerative braking.
  • Multifunction control handle is designed for multi-tasking operations while either walking or riding.
  • Regenerative braking improves overall efficiency and prolongs brake component life.
  • Programmable performance parameters may be customized through the digital display to meet a wide range of job applications and operator skill levels.
  • Polyurethane torsion block casters improve cornering under all conditions, optimizing stability and load handling.
  • Lift limit switch stops the hydraulic motor at maximum lift height to reduce unnecessary strain on the lift components and preserve battery life.
  • Hydraulic overload protection valve prevents operators exceeding the unit's rated load handling capacity.
  • Dual lift cylinders provide efficient hydraulic power for smooth, effortless, lifting to reduce component wear.
EASE OF SERVICE
  • AC drive motors have no springs, brushes, commutator or wearable parts thus reducing planned maintenance.
  • One piece, lightweight service access cover conveniently snaps on and off for easy access to major components reducing service time during inspection.
  • Steel reinforced control handle is impact-resistant and easy to service by simply removing four screw.
  • On-board self-diagnostics with built in analyzer simplifies troubleshooting and eliminates the need for an external hand-held analyzer.
  • AC drive system eliminates the need for the directional contactors thus reducing routine maintenance and inspection time.
  • Drive tire replacement is simplified by removing only five bolts to maximize uptime and productivity.
DURABILITY
  • One-Piece, high-strength service cover protects the electrical, hydraulic and mechanical components against damage.
  • Controller Area Network (CAN-bus) communication technology provides precise, fast and reliable control of all truck functions with fewer electrical components.
  • Welded construction with steel gussets strengthens the tractor bumper to help protect critical components against impact, increasing equipment life.
  • Powder coat paint finish provides added durability against paint flaking or chipping upon impact.
  • Box rail fork construction provides torsional rigidity and maximum strength to prevent premature fatigue.
  • Double and triple-length pallet fork trucks contain increased structural load support on the fork tips to accommodate tip-loading applications.
  • Steel bulkhead wrappers protect vital system components and increase product life.
  • Heavy duty bushings and pins add strength and stability for increased component life.
  • Fork Linkage contains Teflon® Coated PolylubeTM Bushings that require no lubrication.
  • Four-point lift linkage system adds strength and rigidity at the piston shaft connecting point for better load stability.
  • Polymer service cover will not bend, dent, fade, or rust and helps protect all internal system components against damage.
  • Solid steel pull rods provide added strength throughout the entire length of the forks.
  • Hall-effect switches eliminate wear components and require no mechanical adjustments resulting in increased component life.
  • Thermal protection and current limiting circuitry protects internal components from damage.
  • Durable aluminum cover helps protect the control handle and vital electronic components.
OPTIONS
Galvanized Chassis Option

  • Available on 7HBW23, 8HBW30 and 8HBE30.40 models
  • Suited for customers who move materials in and out of: cold storage facilities; chemical and salt and brine industries; or in areas where frequent wash down is required to remove contaminants.
Extends the life of the pallet jack with a number of features that have been integrated such as:

  • Heavy duty Teflon® coated PolylubeTM bushings that require no lubrication and add strength and stability.
  • A motor controller splashguard that helps deflect debris and moisture from entering the traction motor controller area.
  • Galvanized metal frames
  • Corrosion resistant stainless steel and nickel-plated linkage pins*
  • Galvanized lower linkages, pull rods and connecting links
  • Steer bearings easily accessible for lubrication
SPECIFICATION CHART
Model Load Capacity**(lbs.) Voltage (V) Maximum Travel Speed Full Load (m.p.h.) Right Angle Stack 48-inch forks 40-inch wide pallet
8HBE30 6,000 24 6.2 85.4

Toyota forklifts 8FD45U

8-Series Internal Combustion Pneumatic Tier Forklift-8FD45U

Large Capacity Pneumatic Tire

Toyota's highly anticipated line of 8-Series Large Capacity Pneumatic forklifts are now available in 8,000-17,500 lb. internal combustion pneumatic tire models. These trucks offer significant advancements in durability, ergonomics, productivity and fuel cost savings.

ERGONOMICS
  • 11.8 diameter two spoke steering wheel provides greater legroom for operator.
  • Cowl-mounted hydraulic levers are ergonomically situated for improved operator comfort and unobstructed entry and exit from the right side of thetruck.
  • 12 inch long dual operator assist grips have been designed to meet the needs of varying operator sizes.
  • Low profile front cowl results in enhanced forward visibility and lessens back pain by reducing the need of the operator to lean forward to view load andfor tips.
PARFORMANCE
  • Toyota's 3.0 liter 4-cylinder engine with intercooled variable nozzle turbocharger and diesel oxidation catalyst meets the EPA Tier 4 final standard.
  • Toyota's new advanced engine provides optimal power with up to 30% reduced fuel consumption.
  • Independent brake and inching control pedals provide excellent stopping power and precise positioning of the forklift.
  • Automatic fork leveling improves operator efficiency and productivity while reducing product damage.
EASE OF SERVICE
  • Easy-lift hood with automatic assist damper to provide quick and easy access to engine
  • No-tool floorboard removes in seconds for quicker servicing
  • Brake fluid level check is conveniently mounted on the cowl for quick reference to expedite routine maintenance.
SAFETY
  • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tip overs
  • When it senses instability, the Active Control Rear Stabilizer locks the rear axle to help prevent lateral tip overs
  • Active Mast Function Controller senses and controls mast angle and rear tilt speed according to the load's height and weight
DURABILITY
  • Control Area Network (CAN-bus) communication provides quicker, more reliable control of the truck functions with fewer components.
  • Fully stamped steel side panels are thick to help withstand the harshest environments.
  • Moisture-resistant electrical connections are less susceptible to water intrusion and corrosion caused from pressure washing and high moistureenvironments.
  • Stamped steel engine hood provides maximum durability.
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.)
8FD45U 10,000 74/2200 13.1 94 35 129.5

Toyota Forklift 7FBCU55

7-Series Electric Motor Forklift-7FBCU55

4-Wheel Large Capacity Cushion

  • 8,000-12,000 lb. Lifting Capacity

Toyota's new 7-Series large capacity electric forklifts have been designed to maximize safety and productivity. They combine a new AC (Alternating Current) drive system and the System of Active StabilityTM (SAS) to extend battery shift life. Check out some of the great features below to learn more, and don't forget to visit your authorized Toyota Industrial Equipment dealer to get a demonstration!

ERGONOMICS
  • Cowl-mounted hydraulic controls allow for comfortable, "eyes forward" operation
  • Dual operator assist grips combined with the cowl-mounted controls accommodate easy entry/exit from both sides of the truck
  • Low, wide punch plate step on both sides provide sure, comfortable footing
  • Electric shift lever offers fingertip control for fast and easy direction changes
  • On demand, Electronic Hydraulic Power Steering (EHPS) provides quiet, responsive operation, reduced operator fatigue and increased power steering durability
  • Heavy duty, non-slip floormat reduces noise and vibration for a smooth, quiet and comfortable ride
EASE OF SERVICE
  • AC drive system is virtually maintenance free to save you time and money
  • Battery slide-out option features aluminum bronze slides and drop-in entry/exit rollers for easier replacement
  • Right side panel allows for easy access to the controller, while the left side panel offers access to the hydraulic motor
  • No-tool floorboard lifts out easily for daily operator checks
  • Self diagnostics, a built-in analyzer and maintenance hour meter combine to make trouble shooting quick and easy
SAFETY
  • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tipovers
  • When it senses instability, the Active Control Rear Stabilizer locks the rear axle to help prevent lateral tipovers
  • Active Mast Function Controller senses and controls mast angle and rear tilt speed according to the load's height and weight
PRODUCTIVITY
  • SAS Automatic Fork Leveling Control levels forks with the ground for easier pallet retrieval
  • Wide-view mast allows operators to see the forktips in any position, helping enhance safety and reduce operator fatigue
  • AC drive system, available in 36 or 48 volt configuration, generates quicker acceleration, faster top speeds and higher output than DC motors
  • Standard Load Handling Chopper allows greater programmability and controllability of the hydraulic functions, while reducing current draw and increasing hydraulic motor dependability
  • Power Keep Function allows the 7-Series Electric to maintain higher levels of performance and productivity throughout the entire work cycle, even when the battery level is low
  • Automatic shut off saves battery power by turning off the truck after 15 minutes of idle time to extend battery shift life
PROGRAMMABILITY
  • Toyota's new LCD digital monitor provides instant access to virtually every aspect of your forklift's performance and operating system to help you maximize productivity
  • The Power Select function provides four password-protected performance parameters (three preset and one custom) to maximize performance in your application
  • Wide range of digital display functions make it easier to schedule maintenance and perform productivity and other time and motion studies
  • The tuning mode allows the new 7-Series electric to be customized for individual operators in varying applications
SPECIFICATION CHART
Model Load Capacity* (lbs.) Voltage (V) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load(f.p.m.) Maximum Gradeability Full Load 3 Min. Rating(%) Basic Right Angle Stack**(in.)
7FBCU55 12,000 36/48 7.5/9.3 37/53 14 116.9

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics