Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment in Albany, Illinois

Our extensive network of construction equipment vendors are ready to meet all your construction equipment rental needs in Albany. Call our toll free number or fill out the form on the right to be contacted by one of our vendors immediately.

Our vendors are dedicated to providing you with the best price and exceptional service. Each vendor shares in our vision to help make your construction project go as smooth as possible.

Peace of Mind: Our Vendors have years of experience in the construction industry.

Equipment Quality: All vendors stock an extensive range of well maintained heavy construction equipmentOur network of equipment rental facilities span hundreds of cities across all 50 states. We can service a small project from a single equipment rental to hundreds of heavy equipment for larger projects.

Equipment Rental Albany, Construction equipment rental Albany, Construction rental Albany, Heavy Equipment Rental Albany.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

Komatsu Excavators HB215LC-1

HB215LC-1 Hybrid Excavator

The HB215LC-1 uses groundbreaking swing regeneration hybrid technology to save up to an average of 25% in fuel consumption and a like amount in emissions. By capturing the energy that normally would be lost during swing braking in a capacitor, the energy can then be used to power the swing and has energy left to boost the engine by up to 60 horsepower. And all this is done without losing any performance over a standard excavator. And by the way, the Hybrid Excavator HB215LC-1 is very quiet, which is great when working in urban areas.

Engine
Model Komatsu SAA4D107E-1-A
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged and aftercooled
Number of cylinders 1
Bore 4.21" 107 mm
Stroke 4.88" 124 mm
Piston displacement 272 in³ 4.46 ltr
Horsepower:
SAE J1995 - Gross 148 HP 110 kW
ISO 9249 / SAE J1349 - Net 139 HP 104 kW
Rated rpm 2000 rpm
Fan drive type Mechanical
Governor All-speed control, electronic
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydraulics
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 5
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 116 U.S. gal/min 439 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Relief valve setting:
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 5,400 psi 380 kgf/cm² / 37.3 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 4.7" x 52.5" x 3.3" 120 mm x 1334 mm x 85 mm
Arm / 1 5.3" x 58.7" x 3.7" 135 mm x 1490 mm x 95 mm
Bucket for 2.41 m 7'11" and 2.93 m 9'7" Arm / 1 4.5" x 44.1" x 3.2" 115 mm x 1120 mm x 80 mm
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 40,120 lb 178 kN / 18200 kg
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift)
High 3.4 mph 5.5 km/h
Mid 2.5 mph 4.1 km/h
Low 1.9 mph 3.0 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Undercarriage
Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 49 each side
Number of carrier rollers 2 each side
Number of track rollers 9 each side
Coolant and Lubricant Capacity refilling
Fuel tank 105.7 U.S. gal 400 ltr
Coolant (Engine) 4.6 U.S. gal 17.3 ltr
(Hybrid) 1.4 U.S. gal 5.2 ltr
Final drive, each side 0.9 U.S. gal 3.3 ltr
Swing drive 1.9 U.S. gal 7.1 ltr
Swing motor 0.4 U.S. gal 1.6 ltr
Generator motor 1.6 U.S. gal 6.0 ltr
Hydraulic tank 35.7 U.S. gal 135 ltr
Operating Weight (APROXIMATE)
Operating weight including 5700 mm / 18'8" one-piece boom, 2925 mm / 9'7" arm, SAE heaped 0.80 m³ / 1.05 yd³ backhoe bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
HB215LC-1 Shoes 31.5" 800 mm
Operating Weight 48,175 lb 21850 kg
Ground Pressure 4.9 psi 0.35 kg/cm²
33.9 kPa

 

Komatsu Excavators PC490LC-10 SLF
PC490LC-10 Super Long Front 54'-55' Reach

The super long front on the PC490LC-10 gives you a huge working range to go along with the power and stability it already provides. The functions and operations are that of the standard excavator but with a wide variety of ditch cleaning and general purpose buckets for dredging, cleaning and sloping applications.

Notes:

  • The details in this specification brochure are based on Dash 8 and Dash 10 models as indicated. Some attachments may be installed on prior models but specifications may vary. Contact Young Corporation for details.
  • Variations to the specifications in this brochure can be designed and produced in accordance with customer requirements by contacting Young Corporation with details.
  • SUPER LONG FRONT ATTACHMENTS are designed for “LIGHT DUTY"work only. Excavating work or heavy hoisting may result in side loads and other activities that will damage the machine.
  • Disassembly may be required due to transport restrictions.
  • Illustrations may include optional equipment.
  • Operating weights include additional counterweight when required.

Komatsu Excavators PC88MR-10
PC88MR-10 Hydraulic Excavator

The PC88MR-10 is a link between minis and mid-size excavators. The PC88MR-10 has a swing boom, tight tail swing, three track options and backfill blade like a mini but is built to have the reliability and durability of larger excavators.

Engine
Model Komatsu SAA4D95LE-5
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged, and air-to-air aftercooled
Number of cylinders 4
Piston displacement 199 in³ 3.26 ltr
Horsepower @ 1950 rpm:
Net (ISO 9249/SAE J1349) 65.5 HP 48.8 kW
Electric System
Operation voltage 24 V
Battery 55 Ah / 2x12 V
Alternator 35 A / 24 V
Starter 4.5 kW / 24 V
Hydraulic System
Type - HydrauMind (Hydraulic Mechanical Intelligence New Design) system, Closed-center system with load-sensing valves and pressure-compensated valves
Main pumps:
Type Variable displacement, axial piston
Maximum flow 42.3 U.S gal/min 160 ltr/min
Hydraulic motors:
Travel 2 x piston motor with parking brake
Swing 1 x piston motor with swing holding brake
Relief valve setting:
Implement, travel circuit 3,840 psi 26.5 MPa 270 kgf/cm²
Swing and blade circuit 3,060 psi 21.1 MPa 215 kgf/cm²
Performance
Travel speed:
High 3.2 mph 5.1 km/hr
Low 1.8 mph 2.9 km/hr
Swing speed 10.0 rpm
Ground pressure 5.4 psi 0.38 kg/cm²
Max. drawbar pull 15,050 lbf 66.9 kN / 6820 kgf
Gradeability 35°
Bucket digging force (ISO) 13,780 lb 6250 kg
Arm crowd force (ISO) 8,160 lb 3700 kg
Swing System
Driven by Hydraulic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Automatic, with oil immersed discs
Drives & Brakes
Steering control Two levers with pedalsr
Drive method Fully hydrostatic
Service brake Hydraulic lock
Parking brake Mechanical disc
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed track
Track adjuster Hydraulic
Number of carrier rollers 1 each side
Number of track rollers 5 each side
Refill Capacities
Fuel tank 33.0 u.s. gal 125 ltr
Radiator 2.6 u.s. gal 10 ltr
Engine 2.9 u.s. gal 11 ltr
Final drive, each side 0.3 u.s. gal 1.1 ltr
Swing drive 0.7 U.S. gal 2.85 ltr
Hydraulic tank 14.8 u.s. gal 56 ltr
Operating Weight (approximate)
Operating weight including 3405 mm / 11'2" one-piece boom, 2100 mm / 6'11" arm, SAE heaped 0.28 m³ / 0.37 yd³ backhoe bucket, blade, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Operating weight 18,558 lb 8420 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics