Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment in Andalusia, Illinois

Our extensive network of construction equipment vendors are ready to meet all your construction equipment rental needs in Andalusia. Call our toll free number or fill out the form on the right to be contacted by one of our vendors immediately.

Our vendors are dedicated to providing you with the best price and exceptional service. Each vendor shares in our vision to help make your construction project go as smooth as possible.

Peace of Mind: Our Vendors have years of experience in the construction industry.

Equipment Quality: All vendors stock an extensive range of well maintained heavy construction equipmentOur network of equipment rental facilities span hundreds of cities across all 50 states. We can service a small project from a single equipment rental to hundreds of heavy equipment for larger projects.

Equipment Rental Andalusia, Construction equipment rental Andalusia, Construction rental Andalusia, Heavy Equipment Rental Andalusia.

John Deere Scraper Systems 9570R
9520R
Why walk when you can run? The New 9R Series Tractors are built to defy convention. With more engine horsepower (370 - 620 engine hp) and efficient FT4 engine technology, these machines welcome a good challenge. We've also added the new HydraCushionTM Suspension system on select models to help mitigate powerhop and road lope. Just when you think there isn't any room for more, we outfitted the 9R's with the new CommandViewTM III cab. It delivers more space, comfort and convenience than before, with a few features you might not expect. A new and improved e18TM Transmission with Efficiency Manager also adds to the appeal by providing the smoothest shifting power shift in the market, with an additional automatic mode. Get ready run!

FEATURES & SPECS

  • Cummins QSX15
  • New and improved e18TM PowerShift Transmission
  • New HydraCushionTM Suspension option
  • New CommandViewTM III cab
Horsepower: 570 engine hp Up to 58 U.S. gpm (220 L/min)
Hydraulic Capacity: standard. Up to 115 U.S. gpm (435 L/min) optional.
Drawbar Support: Available for long or short scraper drawbars

John Deere Articulated Dump Trucks 410E
Nothing runs like a Deere, because nothing is built like it.

Our E-Series ADTs boast an abundance of uptime-boosting advantages. Its purpose-built powertrain incorporates a PowerTechTM Plus 13.5-L IT4 diesel and heavy-duty John Deere-built axles. High-alloy steel dump bodies and chassis deliver superior strength and rigidity without excess weight. And highly efficient cooling systems with on-demand fans help preserve precious fuel. That's just for starters. We added swing-out fans and coolers for quick and easy cleaning. Plus, standard tire-pressure monitoring, common hydraulic and transmission oils, greaseless bushings, onboard payload weighing system, and numerous other features that help stretch your dollars and avoid taxing your service personnel. When you see the results, you'll run a Deere.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech 6135
Net Power, kW (hp) @ Rated rpm 330 (443) @ 1900
Displacement, L (cu in) 13.5 (824)
Calculated Torque Rise (percentage) --
Transmission
Transmission Manufacturer John Deere
Transmission Type Powershift
Number of Gears Forward and Reverse 8F - 4R
Max. Travel Speed - fwd, kph (mph) 55 (34)
Max. Travel Speed - rev, kph (mph) 17 (11)
Axles
Type Planetary - Outboard
Axle Diff. Lock Transverse Cross-axle Diff Lock
Brakes
Service Brake Type Wet Multi Disc
Engine Brake Transmission
Retarder Other Type --
Parking Brake Type Spring Applied / Hydraulically Released
Suspension
Front Type A-Frame
Front Suspension Nitrogen/Oil-Filled Struts - Auto Levelling
Rear Type Pivoting Walking Beam
Rear Suspension Nitrogen/Oil-Filled Struts - Auto Levelling
Load Body
Construction Standard
Body Tipping Angle Degrees 70
Body Tipping Time to Raise seconds 13
Body Tipping Time to Lower seconds 7
Tip Cylinders Type Twin 1-Stage
Power Down Yes
Steering & Articulation
Articulation Angle, degrees 45
Steering Turns Lock to Lock 4.2
Secondary Steering Type Yes
Dimension
Overall Length, mm (ft in) 10810 (35 ft 6 in)
Overall Tire Width, mm (ft in) 3410 (11 ft 2 in)
Overall Height, mm (ft in) 3860 (12 ft 8 in)
Loadover Height, mm (ft in) 3300 (10 ft 10 in)
Approach Angle degrees 26
Outside Turning Radius, mm (ft in) 8900 (29 ft 2 in)
Inside Turning Radius, mm (ft in) 4630 (15 ft 2 in)
Cab
Steering Wheel Adjustment description Fully Adjustable
Air Conditioner Yes
Tires
Standard 29.5 R25
Capacities
Fuel Tank, L (gal) 609 (161)
Hydraulic Reservoir, L (gal) 242 (64)
Payload
Capacity Struck, cu m (cu yd) 17.8 (23.3)
Capacity Heaped SAE 2:1, cu m (cu yd) 22.7 (29.7)
Weight
Operating Weight Empty, kg (lb) 31853 (70224)
Payload Weight, kg (lb) 37266 (82157)
Gross Weight, kg (lb) 69119 (152382)
Gross Weight, kg (lb) 69119 (152382)

John Deere Scraper Systems 1810C
1810C
The 1810C Carry-All Scraper is a four-tire scraper that carries 18 cu yd of material and has a 10-ft cut width. This scraper works well for construction contractors needing a narrow transport scraper and uses 360-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 12 cu yd
Heaped capacity cubic yards 18 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 27 ft 7 in. 8407 mm
Width, ft, in. (mm) 11 ft 9 in. 3581 mm
Height, ft, in. (mm) 8 ft 0 in. 2438 mm
Bucket dimensions --
Length, ft, in. (mm) 8 ft 10 in. 2692 mm
Width, ft, in. (mm) 10 ft 0 in. 3048 mm
Height, ft, in. (mm) 3 ft 10 in. 1168 mm
WEIGHT
Approximate shipping weight, lb (kg) 20,500 lb 9298 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 28%
Wheels 72%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 20.5
Option 1 NA
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 360 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard, 3 piece blades
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Not Approved
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Factory Installed Only
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics