Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Athens, Indiana

Looking for a construction equipment supplier in Athens? You’ve landed on the right page. Just dial the toll free number or submit the short contact form on the right to get started.

As soon as you are in touch with us, our construction industry experts start matching your requirements with the best vendor in the area having tools and heavy construction machinery you need on rent.

There is little or no wait time involved before you can start listing out your construction equipment rental needs. We will make sure the vendors get in touch with you on the same day.
So, even if you need machines or construction tools (any number) at the last minute, we will see that you are matched against a vendor who can ensure delivery of machines you need at the jobsite on a priority basis.

Dial our toll free number today. Let us make the arrangements for you. You can also submit a short contact form on the right to get in touch with us.

Equipment Rental Athens, Construction equipment rental Athens, Construction Athens,Heavy Equipment Rental Athens.

Komatsu Dozers D375A-6
D375A-6 Crawler Dozer

The D375A-6 is a great combination of power and balance; power for digging and pushing, balance for stability on slopes and for ripping. Giant or multi-shank rippers are available as is a wide lighting and maintenance options specifically designed for the demands of the mining industry. A lock-up torque converter lets the D375A-6 to shift into direct drive when pushing to increase speed and production.

Engine
Model Komatsu SAA6D170E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1,413 in³ 23.15 ltr
Governor All-speed and mid-range, electronic
Horsepower:
SAE J1995 - Gross 636 HP 474 kW
ISO 9249/SAE J1349 - Net 610 HP 455 kW
Hydraulic fan at maximum speed - Net 580 HP 433 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear Forward Reverse
1st 2.2 mph 3.5 km/h 2.9 mph 4.6 km/h
2nd 4.2 mph 6.8 km/h 5.5 mph 8.9 km/h
3rd L 5.0 mph 8.0 km/h 6.0 mph 9.7 km/h
3rd 7.3 mph 11.8 km/h 9.8 mph 15.8 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
Steering System
PCCS, joystick controlled, wet multiple-disc steering clutches are spring-loaded and hydraulically released.Wet multiple-disc, pedal/lever controlled steering brakes are spring-actuated hydraulically released and require no adjustment. Steering clutches and brakes are interconnected for easy, responsive steering.
Minimum turning radius 13'9" 4.2 m
Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Cylindrical, high-tensile-strength steel construction
Rollers and idlers Lubricated track rollers
K-Bogie undercarriage Lubricated track rollers are resiliently mounted to the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.
Extreme service track shoes Lubricated tracks. Unique seals prevent entry of foreign abrasives into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
Number of shoes (each side) 41
Grouser height:
Single grouser 3.7" 93 mm
Shoe width (standard) 24" 610 mm
Ground contact area 7,527 in² 48560 cm²
Ground pressure (tractor) 15.6 psi 108 kPa / 1.10 kg/cm²
Number of track rollers 8
Number of carrier rollers 2
Extreme service shoes: Ground contact area: Ground** pressure:
24'' / 610 mm Additional weight - 0 lb / 0 kg 7,527 in² 48560 cm² 21.0 psi 1.48 kgf/cm² / 145 kPa
28'' / 710 mm Additional weight - 1,500 lb / 680 kg 8,760 in² 56520 cm² 18.2 psi 1.28 kgf/cm² / 126 kPa
32'' / 810 mm Additional weight - 3,000 lb / 1360 kg 9,990 in² 64480 cm² 16.0 psi 1.13 kgf/cm² / 111 kPa
** Ground pressure based on tractor, Semi-U tilt dozer, giant ripper, cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
Coolant and Lubricant Capacity (refill)
Fuel tank 317.0 U.S. gal 1200 ltr
Coolant 31.7 U.S. gal 120 ltr
Engine 22.7 U.S. gal 86 ltr
Torque converter, transmission, bevel gear, and steering system 39.6 U.S. gal 150 ltr
Final drive (each side) 17.1 U.S. gal 65 ltr
Operating Weight
Tractor weight Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 117,290 lb 53200 kg
Including Semi-U tilt dozer, giant ripper, cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 157,940 lb 71640 kg
Ground pressure 21.0 psi 1.48 kg/cm² / 145 kPa
Hydraulic System
Hydraulic control unit:
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit::
All spool control valves externally mounted beside the hydraulic tank. Variable piston pump with capacity (discharge flow) of 366 ltr/min / 96.7 U.S. gal/min for implement at rated engine rpm.
Relief valve setting . . . for implement 3,980 psi 27.5 MPa 280 kg/cm²
Control valves:
Spool control valves for Semi-U tilt dozer and Full-U tilt dozer.
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
• Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders:
Double-acting, piston
Number of cylinders: Bore:
Blade lift 2 5.5" / 140 mm
Blade tilt 1 7.1" / 180 mm
Ripper lift 2 7.9" / 200 mm
Ripper tilt 2 7.1" / 180 mm
Hydraulic oil capacity (refill):
Semi-U dozer or U dozer 34.4 U.S. gal 130 ltr
Giant ripper (variable) 11.9 U.S. gal 45 ltr
Multi-shank ripper (variable) 11.9 U.S. gal 45 ltr

Komatsu Dozers D475A-5SD
D475A-5SD Super Dozer

The exclusive Komatsu Super Dozer blade raises the production levels of the D475A-5SD to new heights. The Super Dozer blade will produce about 15% more than a conventional blade which will increase production and lower your cost per yard. Mate that Super Dozer blade to all the other D475A-5 features, such as lock-up torque converter, palm command joysticks, electronically modulated steering clutches, K-bogie system and quiet, comfortable cab and you have an unbeatable combination.

Engine
Model Komatsu SAA12V140E-3
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 12
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 1,860 in³ 30.48 ltr
Horsepower:
SAE J1349 899 HP 671 kW
DIN6270 890 HP 664 kW
Hydraulic fan at maximum speed 860 HP 641 kW
Rated rpm 2000rpm
Governor All-speed, electronic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow and bypass combined
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear Forward Reverse
1st 2.1 mph 3.3 km/h 2.6 mph 4.2 km/h
2nd 3.9 mph 6.2 km/h 5.0 mph 8.0 km/h
3rd 7.0 mph 11.2 km/h 8.7 mph 14.0 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
Steering System
PCCS, joystick controlled, wet multiple-disc steering clutches are spring-loaded and hydraulically released.Wet multiple-disc, pedal/lever controlled steering brakes are spring-actuated hydraulically released and require no adjustment. Steering clutches and brakes are interconnected for easy, responsive steering.
Minimum turning radius 15'1" 4.6 m
Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Cylindrical, high-tensile-strength steel construction
Rollers and idlers Lubricated track rollers
K-Bogie undercarriage Lubricated track rollers are resiliently mounted to the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.
Extreme service track shoes Lubricated tracks. Unique seals prevent entry of foreign abrasives into pin-to-bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
Number of shoes (each side) 41
Grouser height:
Single grouser 4.1" 105 mm
Shoe width (standard) 32" 810 mm
Ground contact area 11,360 in² 73290 cm²
Ground pressure (Tractor) 16.2 psi 112 kPa 1.14 kg/cm²
Number of track rollers 8
Number of carrier rollers 2
Extreme service shoes: 36" 910 mm
Additional weight 4,030 lb 1830 kg
Ground contact area 12,762 in² 82340 cm²
Tractor ground pressure 14.8 psi 102 kPa 1.04 kg/cm²
Service Refill Capacities
Fuel tank 441 U.S. gal 1670 ltr
Coolant 72.6 U.S. gal 275 ltr
Engine 32.0 U.S. gal 121 ltr
Torque converter, transmission, bevel gear, and steering system 55.5 U.S. gal 210 ltr
Final drive (each side) 19.8 U.S. gal 75 ltr
Operating Weight
Tractor weight
Including steel cab, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
186,310 lb 84510 kg
Operating weight
Including strengthened Super Dozer blade, counterweight, steel cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
249,560 lb 113200 kg
Ground pressure 21.9 psi 151 kPa 1.54 kg/cm²
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Relief valve setting 3,980 psi 27.5 MPa 280 kg/cm²
Control valves: Spool control valves for Super Dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade pitch (digging angle) Increase, hold, and decrease
Hydraulic cylinders Double-acting, piston
Hydraulic cylinders
Number of cylinders
Bore Bore
Blade lift / 2 7.09" 180 mm
Blade tilt and pitch / 2 9.84" 250 mm
Hydraulic oil capacity (refill):
Super Dozer 48 U.S. gal 180 ltr

Flatbed Trailers 4610

JLG Flatbed Trailers 4610
Key Specs

  • Deck Capacity: 4500 lb / 2041.17 kg
  • Deck Length: 10 ft / 3.05 m
  • Deck Width: 6 ft / 1.83 m

Key Features

  • Exclusive Power Deck® system
  • Deck raises and lowers in 15 seconds
  • Single-lever hydraulic control
Dimensional Data
Deck Capacity 4500 lb / 2041.17 kg
Deck Length 10 ft / 3.05 m
Deck Width 6 ft / 1.83 m
Trailer Length 15 ft / 4.57 m
Trailer Wheel Size 1 ft 3 in. / 0.37 m
General
Axle Tandem
Brakes Electric
Hitch - Ball Size 2-5/16"
Lift Mechanism Hydraulic
Trailer Weight 2070 lb / 938.94 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics