Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Dyer, Indiana

Looking for a construction equipment supplier in Dyer? You’ve landed on the right page. Just dial the toll free number or submit the short contact form on the right to get started.

As soon as you are in touch with us, our construction industry experts start matching your requirements with the best vendor in the area having tools and heavy construction machinery you need on rent.

There is little or no wait time involved before you can start listing out your construction equipment rental needs. We will make sure the vendors get in touch with you on the same day.
So, even if you need machines or construction tools (any number) at the last minute, we will see that you are matched against a vendor who can ensure delivery of machines you need at the jobsite on a priority basis.

Dial our toll free number today. Let us make the arrangements for you. You can also submit a short contact form on the right to get in touch with us.

Equipment Rental Dyer, Construction equipment rental Dyer, Construction Dyer,Heavy Equipment Rental Dyer.

If you own a construction company, run a warehouse or have a goods transport business in Hollandale, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.

But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.

But, finding reliable Excavator rentals in Hollandale isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Hollandale.

This is where HeavyRentals.Equipment can help.

Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Hollandale as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Hollandale against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.

As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Hollandale you wish to choose.

Komatsu Excavators PC210LC-10

PC210LC-10 Hydraulic Excavator

The PC210LC-10 is one of the most popular Komatsu excavators in the world. The reason is simple. Outstanding performance and economy day in, day out. Komatsu's Tier 4 technology keeps you running rather than waiting to regenerate while saving fuel at the same time makes the PC210LC-10 stand out for the competition in this class.

Engine
Model Komatsu SAA6D107E-2*
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 4.21" 107 mm
Stroke 4.88" 124 mm
Piston displacement 408 in³ 6.69 ltr
Horsepower:
SAE J1995 - Gross 165 HP 123 kW
ISO 9249 / SAE J1349 - Net 158 HP 118 kW
Rated rpm 2000 rpm
Fan drive method for radiator cooling Mechanical
Governor All-speed control, electronic
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydraulics
Type - HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 125.5 U.S. gal/min 475 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 470 psi 380 kgf/cm² / 37.3 MPa
Swing circuit 4,190 psi 295 kgf/cm²/ 28.9 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 5.1" x 52.5" x 3.5" 130 mm x 1334 mm x 90 mm
Arm / 1 5.3" x 58.7" x 3.7" 135 mm x 1490 mm x 95 mm
Bucket / 1 4.5" x 44.1" x 3.2" 115 mm x 1120 mm x 80 mm
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 45,349 lb 202 kN / 20570 kg
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift)
High 3.4 mph 5.5 km/h
Mid 2.5 mph 4.1 km/h
Low 1.9 mph 3.0 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 12.4 rpm
Swing torque 49,907 ft lbs 6900 kg.m
Undercarriage
Center frame X-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes (each side) 44
Number of carrier rollers (each side) 2
Number of track rollers (each side) 7
Coolant and Lubricant Capacity refilling
Fuel tank 105.7 U.S. gal 400 ltr
Coolant 8.1 U.S. gal 30.7 ltr
Engine 6.1 U.S. gal 23.1 ltr
Final drive, each side 1.3 U.S. gal 5.0 ltr
Swing drive 1.7 U.S. gal 6.6 ltr
Hydraulic tank 34.9 U.S. gal 132 ltr
Hydraulic system 61.8 U.S. gal 234 ltr
Operating Weight (APROXIMATE)
Operating weight, including 5700 mm / 18'8" one-piece boom, 2925 mm / 9'7" arm, SAE heaped 1.02 m³ / 1.34 yd³ bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Triple-Grouser Shoes Operating Weight: Ground Pressure:
28" / 700 mm 51,419 lb
23323 kg
6.2 psi
0.43 kg/cm²
31.5' / 800 mm 52,036 lb
23603 kg
5.5 psi
0.38 kg/cm²

Komatsu Excavators PC1250LC-8 MH
PC1250LC-8 MH Material Handler (55'-70' Reach)

If you have a material handling application that needs high lift and plenty of lifting power, the PC1250LC-8 MH requires a closer look. An elevated cab, with tiltable structure for service access, and up to a 70 - two piece front give the PC1250LC-8 MH tremendous operating range.

Engine
Model Komatsu SAA6D170E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 6.69" 170 mm
Stroke 6.69" 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 (Gross) 688 HP 514 kW
ISO 9249 / SAE J1349 - Net 672 HP 502 kW
Hydraulic fan at maximum speed / Net 620 HP 463 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic, variable speed, reversible
EPA Tier 3 and EU stage 3A emission certified.
Hydraulics System
Type Electronic Open-center Load Sensing System (EOLSS)
Number of selectable working modes 2
Main pump:
Type Variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow
For implement and travel 2 x 494 ltr/min 2 x 130.5 U.S. gpm
For swing 1 x 600 ltr/min 1 x 158.5 U.S. gpm
Sub-pump for control circuit Gear pump
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 3,910 psi 27.0 MPa 275 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders Bore x Stroke bore x stroke
Boom / 2 8.9" x 94.1" 225 mm x 2390 mm
Arm / 1 10.0" x 110.0" 254 mm x 2794 mm
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 5.5 rpm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 154,320 lb 70000 kg / 686 kN
Gradeability 70%
Maximum travel speed:
High 2.0 mph 3.2 km/h
Low 1.3 mph 2.1 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 55 each side
No. of carrier rollers 3 each side
No. of track rollers 10 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 359.3 US gal 1360 ltr
Radiator 37.5 US gal 142 ltr
Engine 22.7 US gal 86 ltr
Final drive, each side 5.5 US gal 21 ltr
Swing drive 2 x 6.4 US gal 2 x 24.3 ltr
Hydraulic tank 177.0 US gal 670 ltr
PTO 3.6 US gal 13.5 ltr
Operating Weight (approximate)
Operating weight w/o Grapple:
55' / 16.8 m 244,418 lb 110868 kg
70' / 21.3 m 279,157 lb 126626 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics