Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Chapin, Iowa

Small and medium size construction companies in Chapin cannot easily afford to own every single piece of heavy machinery or construction supplies but they cannot afford to operate without them either. So, construction equipment rental in Chapin is no doubt the best option for such companies.

The service is hassle-free and you can get just about any heavy construction equipment on rent for a fixed period of time. When there are no major projects going on or when the business slows down for some time, you will have the peace of mind because you never invested a big chunk of money for purchasing expensive heavy machinery such as excavators, dozers, forklifts, wheel loaders, loader backhoes, etc.

Finding the right vendors with huge inventories of construction equipment and supplies is now easy through us. You can apprise us of your requirements by dialing the toll free number. You can also submit the quick contact form (on the right) and we will get back to you.

Equipment Rental Chapin , Construction equipment rental Chapin , Construction Chapin , Heavy Equipment Rental Chapin

Unable to parse entered address. API response code: REQUEST_DENIED

Finding the latest, well-maintained and completely tested equipment, whether for lifting goods at a warehouse or at construction sites is not exactly easy. We know that contractors and business owners face this problem time and again when the need boom lifts on rent in Glendale or elsewhere.

It was for solving these problems that HeavyRentals.Equipment platform was created! Today, we are proud of the fact that we service thousands of locations all across the United States including Glendale.

So, the next time you need electric, diesel or gas boom lifts on rent in Glendale, you can always count on HeavyRentals.Equipment!

You can always expect prompt delivery service, flexible rental duration options, and even site inspections (if that's required). In case there are any urgent callouts, we are here to make emergency services available as well.

Please call us at the number listed above or fill up the inquiry form available, here at HeavyRentals.Equipment. You'd be able to glance through the best deals on boom lift rentals within few hours, instead of having to spend several days of your precious time on calling up and filtering out numerous rental companies.

Komatsu Wheel Loaders WD600-6
WD600-6 Wheel Dozer

High productivity is the story of the WD600-6 wheeled dozer. The operator has two engine power modes, load sensing hydraulics and a modulated clutch system to harness the 527 horsepower to maximize production when moving mass quantities of soil, coal, chips, slurry or whatever gets in the way.

Engine
Model Komatsu SAA6D170E-5*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAEJ1995 - Gross 530 HP 396 kW
ISO 9249 / SAEJ1349 - Net 527 HP 393 kW
Hydraulic fan at maximum speed - Net 502 HP 374 kW
Rated rpm 1800 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
EPA Tier 3 and EU stage 3A emissions certified.
Transmission
Torque converter:
Type 3-element, single-stage, double-phase
Transmission:
Type Full-powershift, planetary type
Travel speed Measured with 35/65-33 tires
Speed: Forward
(Lock-up clutch ON)
Reverse
1st 4.2 mph
6.7 km/h
4.5 mph
7.3 km/h
2nd 7.3 mph
11.7 km/h(7.7 mph
12.4 km/h)
8.0mph
12.8 km/h
3rd 12.6 mph
20.3 km/h(13.5 mph
21.7 km/h)
13.7 mph
22.0 km/h
4th 20.5 mph
33.0 km/h(23.4 mph
37.7 km/h)
22.4 mph
36.0 km/h
Axles and Final Drives
Drive system Four-wheel drive.
Front Fixed, full-floating.
Rear Center-pin support, full-floating, 26° total oscillation.
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 43° each direction.
Minimum turning radius at the center of outside tire 23'3" 7075 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 43.1 U.S. gal/min 163 ltr/min
Relief valve setting 4,980 psi 34.3 MPa
350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 5.1" x 20" 130 mm x 510 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 47.6 + 47.6 U.S. gal/min 180 + 180 ltr/min
Relief valve setting 3,560 psi 24.5 MPa 250 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Blade lift - 1 6.3" x 42.5" 160 mm x 1080 mm
Tilt and pitch - 2 7.0" x 9.3" 180 mm x 237 mm
Control valve 3-spool type
Control positions:
Blade lift Raise, hold, lower, and float
Tilt and pitch Tilt-left, tilt-right, hold, pitch forward and back
Hydraulic cycle time
Raise 2.0 sec
Lower 1.3 sec
Tilt (left / right) 0.8 / 1.1 sec
Pitch (front / rear)mage 2.1 / 1.6 sec
Service Refill Capacities
Cooling system 38.8 U.S. gal 147 ltr
Fuel tank 189.7 U.S. gal 718 ltr
Engine 22.7 U.S. gal 86 ltr
Hydraulic system 117.0 U.S. gal 443 ltr
Axle:
Front 41.0 U.S. gal 155 ltr
Rear 41.0 U.S. gal 155 ltr
Torque converter and transmission 21.9 U.S. gal 83 ltr

When selecting a Scissor Lift Rental unit in Bonneau, there is a multitude of factors that need attention. Just knowing the weight of the objects to be carried by the forklift is not enough. You must also determine the lift height, calculate the required turning radius, and also pay attention to the benefits of renting over purchasing.

But as simple as these things may sound, the process is complicated. Many managers may have to rely upon opinions given by forklift operators. Alternately, you can seek advice from experts at HeavyRentals.Equipment. We have an experienced team on board who can match you against the best Scissor Lift Rental companies in Bonneau. They can give you an accurate idea of the capacity of the different brands and their machines.

We make it more convenient for our clients to get access to reliable Scissor Lift Rental in Bonneau. We do this in two simple ways - depending upon your requirement, we can ask some pre-screened vendors in your area to get in touch with you, or we can provide you with their contact details, and help you establish direct contact with them. You choose!

We have a network of vendors with presence in more than 5,000 US locations. So, irrespective of how varied your forklift requirements are or where you are located, we may be able to help you out.

When you hire forklift for rental from one of our dealers, you can be rest assured that it follows all safety standards, and has been thoroughly inspected. Our vendors also offer a pick-drop-service for forklifts.

The right forklift can greatly enhance your efficiency and a wrong decision can be a waste of time and money. Don't take that chance and call our experts right away. We will offer you the best-suited advice for your business. With our help, you will be able to choose the best Scissor Lift Rental company in Bonneau in no time.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics