Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Clarksville, Iowa

Small and medium size construction companies in Clarksville cannot easily afford to own every single piece of heavy machinery or construction supplies but they cannot afford to operate without them either. So, construction equipment rental in Clarksville is no doubt the best option for such companies.

The service is hassle-free and you can get just about any heavy construction equipment on rent for a fixed period of time. When there are no major projects going on or when the business slows down for some time, you will have the peace of mind because you never invested a big chunk of money for purchasing expensive heavy machinery such as excavators, dozers, forklifts, wheel loaders, loader backhoes, etc.

Finding the right vendors with huge inventories of construction equipment and supplies is now easy through us. You can apprise us of your requirements by dialing the toll free number. You can also submit the quick contact form (on the right) and we will get back to you.

Equipment Rental Clarksville , Construction equipment rental Clarksville , Construction Clarksville , Heavy Equipment Rental Clarksville

KKomatsu Dozers D39PX-23
D39PXi-23 Crawler Dozer
iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 107 HP 79 kW
ISO 9249 / SAE J1349 - Net 105 HP 78 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.

Minimum turning radius* 87" 2.2 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 6
Type of shoes (standard) Single grouser
Number of shoes (each side) 39
Grouser height 2.1" 53 mm
Shoe width (standard) 20" 510 mm
Ground contact area 3,731 in 24072 cm²
Ground pressure
(with dozer, ROPS cab)
5.64 psi 0.40 kgf/cm² / 38.9 kPa
Track gauge 5'4" 1620 mm
Length of track on ground 7'9" 2360 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 15.8 U.S. gal 60 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,387 lb 8340 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,922 lb 9490 kg
hydraulic system
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.  
Positions:  
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Komatsu Dozers D475A-5
D475A-5 Crawler Dozer

When mines are looking for a dozer with the versatility to go from stripping overburden one day to ripping solid rock or stirring the leech field the next and cleaning up around the dragline the day after they call on the D475A-5. Utilizing an automatic lock-up torque converter, the D475A-5 give the operator a great combination of power and speed and both of those equal production. Low drive undercarriage with K-bogies make the D475A-5 a superior ripping tractor. Palm control joysticks, air suspension seat that rotates 15 degrees to the right and low dBA cab provide the operator with a comfortable environment with the tools he needs to maximize production.

Engine
Model Komatsu SAA12V140E-3
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 12
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 1,860 in³ 30.48 ltr
Flywheel horsepower:
SAE J1349 899 HP 671 kW
DIN6270 890 HP 644 kW
Hydraulic fan at maximum speed 860 HP 641 kW
Rated rpm 1900 rpm
Governor All-speed, electronic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow and bypass combined
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear Forward Reverse
1st 2.1 mph 3.3 km/h 2.6 mph 4.2 km/h
2nd 3.9 mph 6.2 km/h 5.0 mph 8.0 km/h
3rd 7.0 mph 11.2 km/h 8.7 mph 14.0 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
Steering System
PCCS, joystick controlled, wet multiple-disc steering clutches are spring-loaded and hydraulically released.Wet multiple-disc, pedal/lever controlled steering brakes are spring-actuated hydraulically released and require no adjustment. Steering clutches and brakes are interconnected for easy, responsive steering.
Minimum turning radius 15'1" 4.6 m
Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Cylindrical, high-tensile-strength steel construction
Rollers and idlers Lubricated track rollers
K-Bogie undercarriage Lubricated track rollers are resiliently mounted to the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.
Extreme service track shoes Lubricated tracks. Unique seals prevent entry of foreign abrasives into pin-to-bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
Number of shoes (each side) 41
Grouser height:
Single grouser 4.1" 105 mm
Shoe width (standard) 32" 810 mm
Ground contact area 11,360 in² 73290 cm²
Ground pressure (Tractor) 16.2 psi 112 kPa 1.14 kg/cm²
Number of track rollers 8
Number of carrier rollers 2
Extreme service shoes: 36" 910 mm
Additional weight 4,030 lb 1830 kg
Ground contact area 12,762 in² 82340 cm²
Tractor ground pressure 14.8 psi 102 kPa 1.04 kg/cm²
Service Refill Capacities
Fuel tank 441 U.S. gal 1670 ltr
Coolant 72.6 U.S. gal 275 ltr
Engine 32.0 U.S. gal 121 ltr
Torque converter, transmission, bevel gear, and steering system 55.5 U.S. gal 210 ltr
Final drive (each side) 19.8 U.S. gal 75 ltr
Operating Weight
Tractor weight
Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
184,290 lb 83590 kg
Operating weight
Including strengthened Full-U tilt dozer, giant ripper, steel cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
238,960 lb 108390 kg
Ground pressure 24.0 psi 166 kPa 1.69 kg/cm²
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Relief valve setting 3,980 psi 27.5 MPa 280 kg/cm²
Control valves (Spool control valves for Semi-U tilt dozer and Full-U tilt dozer):
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Control valves (Spool control valves for variable digging angle multi-shank ripper and giant ripper.
Positions:
Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders Double-acting, piston
Hydraulic cylinders
Number of cylinders
Bore Bore
Blade lift / 2 7.09" 180 mm
Blade tilt / 1 9.84" 250 mm
Ripper lift / 2 8.86" 225 mm
Ripper tilt / 2 8.86" 225 mm
Hydraulic oil capacity (refill):
Semi-U tilt dozer 48 U.S. gal 180 ltr
U tilt dozer 48 U.S. gal 180 ltr
Ripper equipment (additional volume):
Giant ripper 34 U.S. gal 130 ltr
Multi-shank ripper 34 U.S. gal 130 ltr

Komatsu Forklift AM50 Series
AM50 Series Electric Riders

Komatsu's electric counterbalanced forklifts bring bold improvements to the market with significant reductions in total operating costs while improving truck performance and productivity. Komatsu's AE50 and AM50 Series of four-wheel and three-wheel electric cushion and pneumatic tire forklifts feature innovative engineering ideas to show Komatsu's commitment to fulfilling customer needs, conserving or environment, and reducing total cost of ownership.

General
GENERAL FB15MU-12 FB18MU-12 FB20MU-12
Power Type Electric Electric Electric
Operation Type Sit-Down Sit-Down Sit-Down
Capacity @ 24 in. (600mm) Load Center 3,000 lbs 3,500 lbs 4,000 lbs
Load Distance From Center Axle (2 Stage) 15.9 in 15.9 in 16.7 in
Wheelbase 52.8 in 54.7 in 58.5 in
Weight
WEIGHT FB15MU-12 FB18MU-12 FB20MU-12
Service Weight 7,010 lbs 7,640 lbs 8,600 lbs
Axle Loading Loaded Front 8,760 lbs 9,700 lbs 11,070 lbs
Loaded Rear 1,250 lbs 1,440 lbs 1,530 lbs
Unloaded Front 3,420 lbs 3,570 lbs 4,190 lbs
Unloaded Rear 3,590 lbs 4,070 lbs 4,410 lbs
Tires
TIRES FB15MU-12 FB18MU-12 FB20MU-12
Tire Type Cushion Cushion Cushion
Tire Size Front 18 x 7 x 12.13 in 18 x 7 x 12.13 in 18 x 8 x 12.13 in
Rear 15 x 5 x 11.25 in 15 x 5 x 11.25 in 15 x 5 x 11.25 in
Number of Wheels, Front/Rear 2x / 2 (dual) 2x / 2 (dual) 2x / 2 (dual)
Tread Front 37 in 37 in 37.4 in
Rear 6.7 in 6.7 in 6.7 in
Dimensions
DIMENSIONS FB15MU-12 FB18MU-12 FB20MU-12
Tilting Angle, Forward/Backward 6 / 10 deg 6 / 10 deg 6 / 10 deg
Mast Height Lowered 84.4 in 84.4 in 89 in
Extended 167.5 in 167.5 in 168.1 in
Free Lift Height 5.9 in 5.9 in 6.7 in
Maximum Fork Height 129.9 in 129.9 in 129.9 in
Height Overhead Guard 81.5 in 81.5 in 81.5 in
Length, with Standard Forks 118.3 in 120.9 in 125.4 in
Length to Fork Face 76.2 in 78.7 in 83.3 in
Overall Width at Drive Tires 43.8 in 43.8 in 45.8 in
Forks, Thickness x Width x Length 1.4 x 3.9 x 42.1 in 1.4 x 3.9 x 42.1 in 1.4 x 4.8 x 42.1 in
Carriage Width/ITA Class 38.2 in / II 38.2 in / II 38.2 in / II
Ground Clearance, Under Mast 3.7 in 3.7 in 3.7 in
Ground Clearance, Center of Wheelbase 4.9 in 4.9 in 4.9 in
Right Angle Stacking Aisle 120.5/125.3 in 122.8/127.7 in 127.4/132.4 in
Turning Radius, Outside 60.2 in 62.6 in 66.5 in
Performance
PERFORMANCE FB15MU-12 FB18MU-12 FB20MU-12
Travel Speed, Loaded/Unloaded 10.0 / 11.0 mph 10.0 / 11.0 mph 9.0 / 10.0 mph
Lifting Speed, Loaded/Unloaded 66.9 / 118.1 fpm 63.0 / 118.1 fpm 55.1 / 98.4 fpm
Lowering Speed, Loaded/Unloaded 88.6 / 108.3 fpm 88.6 / 108.3 fpm 72.8 / 86.6 fpm
Maximum Drawbar Pull, Loaded 2,150 lbs 2,150 lbs 2,040 lbs
Maximum Gradeability 19% 16% 14%
Service Brake, Operation/Control Foot/Hydraulic Foot/Hydraulic Foot/Hydraulic
Parking Brake, Operation/Control Hand/Mechanical Hand/Mechanical Hand/Mechanical
Steering Type Fully Hydrostatic Power Steering Fully Hydrostatic Power Steering Fully Hydrostatic Power Steering
Drive
DRIVE FB15MU-12 FB18MU-12 FB20MU-12
Drive Motor (AC) 6.0 x 2 HP 6.0 x 2 HP 6.0 x 2 HP
Pump Motor (AC) 12.1 HP 12.1 HP 12.1 HP
Battery Voltage 48 V 48 V 48 V
Battery Capacity, Maximum 600 Ah/6hr 600 Ah/6hr 600 Ah/6hr
Minimum Battery Weight 1,590 lbs 1,590 lbs 1,680 lbs
Maximum Battery Weight 2,100 lbs 2,100 lbs 2,100 lbs
Other
OTHER FB15MU-12 FB18MU-12 FB20MU-12
Drive Motor Control AC Inverter AC Inverter AC Inverter
Relief Pressure - Attachment 2,300 psi 2,300 psi 2,300 psi
Hydraulic Oil Capacity 6.1 US Gallons 6.1 US Gallons 6.1 US Gallons

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics