Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Cleghorn, Iowa

Small and medium size construction companies in Cleghorn cannot easily afford to own every single piece of heavy machinery or construction supplies but they cannot afford to operate without them either. So, construction equipment rental in Cleghorn is no doubt the best option for such companies.

The service is hassle-free and you can get just about any heavy construction equipment on rent for a fixed period of time. When there are no major projects going on or when the business slows down for some time, you will have the peace of mind because you never invested a big chunk of money for purchasing expensive heavy machinery such as excavators, dozers, forklifts, wheel loaders, loader backhoes, etc.

Finding the right vendors with huge inventories of construction equipment and supplies is now easy through us. You can apprise us of your requirements by dialing the toll free number. You can also submit the quick contact form (on the right) and we will get back to you.

Equipment Rental Cleghorn , Construction equipment rental Cleghorn , Construction Cleghorn , Heavy Equipment Rental Cleghorn

When selecting a Scissor Lift Rental unit in Lake Helen, there is a multitude of factors that need attention. Just knowing the weight of the objects to be carried by the forklift is not enough. You must also determine the lift height, calculate the required turning radius, and also pay attention to the benefits of renting over purchasing.

But as simple as these things may sound, the process is complicated. Many managers may have to rely upon opinions given by forklift operators. Alternately, you can seek advice from experts at HeavyRentals.Equipment. We have an experienced team on board who can match you against the best Scissor Lift Rental companies in Lake Helen. They can give you an accurate idea of the capacity of the different brands and their machines.

We make it more convenient for our clients to get access to reliable Scissor Lift Rental in Lake Helen. We do this in two simple ways - depending upon your requirement, we can ask some pre-screened vendors in your area to get in touch with you, or we can provide you with their contact details, and help you establish direct contact with them. You choose!

We have a network of vendors with presence in more than 5,000 US locations. So, irrespective of how varied your forklift requirements are or where you are located, we may be able to help you out.

When you hire forklift for rental from one of our dealers, you can be rest assured that it follows all safety standards, and has been thoroughly inspected. Our vendors also offer a pick-drop-service for forklifts.

The right forklift can greatly enhance your efficiency and a wrong decision can be a waste of time and money. Don't take that chance and call our experts right away. We will offer you the best-suited advice for your business. With our help, you will be able to choose the best Scissor Lift Rental company in Lake Helen in no time.

Komatsu Trucks 830E-1AC

830E-1AC Electric Drive Truck

A leader in the 240 ton class mining truck, the 830E-1AC is built on a tradition of excellence dating back to it's introduction as a DC drive truck in 1989. Customers experience the lowest cost per ton operations in the industry while utilizing the 830E-1AC as their prime material hauler. Powered by a Komatsu SDA16V160 engine, the General Electric drive system provides efficient transfer of the power to the ground while demonstrating low fuel consumption and excellent reliability. The dynamic retarding provides the greatest braking efficiency in the industry, utilizing advanced logic including retard speed control. The modern operators cab is fully ROPS/FOPS certified and designed for maximum operator comfort. With a host of options designed for mine specific needs, the 830E-1AC is the only 240 ton class truck you will ever need.

Engine
*Make and model Komatsu SDA16V160
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
*Rated brake power@ 1900 rpm 2,500 HP 1865 kW
**Flywheel power@ 1900 rpm 2,360 HP 1761 kW
Weight (wet) 21,182 lb 9608 kg
* Tier 2 emissions certified. Tier 1 emissions engine is optional outside of North America.
** Rated brake power is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump
***Flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent gross engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC current
Alternator G.E. GTA-41
Dual impeller in-line blower 9,000 cfm 255 m³/min
Control AC torque control system
Motorized wheels GEB25
Ratio 31.875:1
Speed (maximum) 40 mph 64 kph
* Wheel motor application Depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, tires (bias ply or radial)
Standard tire 40.00R57
*Optional tire 46/90R57
Standard five (5) piece rim 737 mm x 1488 mm x 152 mm rims 29'' x 57'' x 6'' rims
Typical tire weight 46,476 lbs 21081 kg
* Fitment of optional 46/90R57 tire shall increase nominal GVW rating to 392357 kg / 865,000 lbs
Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet - tensile strength steel (two-piece) 19 mm / 1379 mPa 0.75'' / 200,000 psi
Front sheet - tensile strength steel 12 mm / 1379 mPa 0.47'' / 200,000 psi
Side sheet - tensile strength steel 8 mm / 1379 mPa 0.31'' / 200,000 psi
Canopy sheet 5 mm / 690 mPa 0.19'' / 100,000 psi
Struck 153 yd³ 117 m³
Standard SAE heaped 2:1 193 yd³ 147 m³
Standard Komatsu body weight 61,000 lbs 27669 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2, (SAE J1040/ISO 3449) adjustable air suspension seat w/lumbar support and arm rests, passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted glass, power windows, Komatsu Payload Weighing System, 55,000 Btu/hr heater and defroster, 21,600 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box-sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material - tensile strength steel 70,000 psi 482.6 mPa
Casting material - tensile strength steel 90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.25'' 32 mm
Side plate thickness 0.62'' 16 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
System meets ISO 3450/1996
Service brakes: all-hydraulic actuated
Front Wheel speed disc.Three calipers on a 47.75" / 1213 mm O.D. disc.
Rear Dual disc armature speed. Two 25" / 635 mm O.D. discs per side.One caliper per disc.
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch-activated
Parking brakes Spring-applied, hydraulically released, with speed application protection.
Electric dynamic retarder (max.) 4000 hp 2983 kW
Suspension
HYDRAIR® II
Variable rate hydro-pneumatic with integral rebound control.
Max. front stroke 13.2'' 335 mm
Max. rear stroke 11.0'' 279 mm
Max. rear axle oscillation 10.3°
Cooling System
L&M radiator assembly with sight gauge. Deaeration-type top tank. Dual pass cooling.
Radiator frontal area. 67.2 ft² 6.24 m²
Service Capacities
Cooling system 150 U.S. gal 568 L
*Crankcase 74 U.S. gal 280 L
Hydraulic system 250 U.S. gal 946 L
Motor gear box 10 U.S. gal 38 L
Fuel 1200 U.S. gal 4542 L
* Includes lube oil filters
Hydraulic System
Cooling system 150 U.S. gal 568 L
*Crankcase 74 U.S. gal 280 L
Hydraulic system 250 U.S. gal 946 L
Motor gear box 10 U.S. gal 38 L
Fuel 1200 U.S. gal 4542 L
* Includes lube oil filters
Electrical System
4 x 8D 1450 CCA, 12 volt batteries, in series/parallel,deck-mounted with disconnect switch
Alternator 24-volt 140 amp
Lighting 24 volt
Cranking motors two/24 volt
Weight Distribution
Empty Vehicle Weight:(Wet, 100% fuel, no options, standard Komatsu body, standard tires)
Front axle 179,190 lb 81279 kg 50 %
Rear axle 182,810 lb 82921 kg 50 %
Total EVW 362,000 lb 164200 kg
Gross Vehicle Weight (Nominal):
Front axle 280,715 lb 127330 kg 33 %
Rear axle 569,936 lb 258519 kg 67 %
Total 850,650 lb 385848 kg
Nominal Payload* 488,650 lb 221648 kg
244 U.S. ton
*Nominal payload is as defined within Komatsu America Corporation’s payload policy documentation. In general, the nominal payload must be adjusted for the specific vehicle configuration and site application.
The figures above are provided for basic product description purposes. Please contact your Komatsu distributor for specific application requirements.

When selecting a Scissor Lift Rental unit in Maitland, there is a multitude of factors that need attention. Just knowing the weight of the objects to be carried by the forklift is not enough. You must also determine the lift height, calculate the required turning radius, and also pay attention to the benefits of renting over purchasing.

But as simple as these things may sound, the process is complicated. Many managers may have to rely upon opinions given by forklift operators. Alternately, you can seek advice from experts at HeavyRentals.Equipment. We have an experienced team on board who can match you against the best Scissor Lift Rental companies in Maitland. They can give you an accurate idea of the capacity of the different brands and their machines.

We make it more convenient for our clients to get access to reliable Scissor Lift Rental in Maitland. We do this in two simple ways - depending upon your requirement, we can ask some pre-screened vendors in your area to get in touch with you, or we can provide you with their contact details, and help you establish direct contact with them. You choose!

We have a network of vendors with presence in more than 5,000 US locations. So, irrespective of how varied your forklift requirements are or where you are located, we may be able to help you out.

When you hire forklift for rental from one of our dealers, you can be rest assured that it follows all safety standards, and has been thoroughly inspected. Our vendors also offer a pick-drop-service for forklifts.

The right forklift can greatly enhance your efficiency and a wrong decision can be a waste of time and money. Don't take that chance and call our experts right away. We will offer you the best-suited advice for your business. With our help, you will be able to choose the best Scissor Lift Rental company in Maitland in no time.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics