Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Benedict, Kansas

Are you looking for work-ready & reliable machinery to kick start a construction project in Benedict ?

Whether you’ve been awarded a construction project already or are exploring potential tie-ups for heavy construction equipment rentals in Benedict, let us tell you that we can put you in touch with the right vendors within a day or two!

Yes, we’ve onboard a large network of vendors with work-ready construction equipment. You can rent equipment on a daily, weekly or monthly basis, as you see fit. So, you need not spend a dime extra on equipment you acquire on a rental basis.

As soon as you call us at our toll free number or get in touch through the short contact form on the right, we will start working on finding the best vendor for you.

The process normally takes 6 to 48 hours to complete.

Equipment Rental Benedict, Construction equipment rental Benedict, Construction Benedict, Heavy Equipment Rental Benedict.

Unable to parse entered address. API response code: REQUEST_DENIED

New Holland Skid Steer Loader L221

New Holland Skid Steer Loader L221
MORE DIGGING AND PUSHING POWER BY DESIGN
New Holland Skid Steer Loader model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model FPT/F5H FL463
Bore/stroke, in (mm) 3.9x4.3 (99x110)
Displacement, in3 (L) 207 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged with external CEGR
Horsepower per SAE J1349 Gross hp (kW) 74 (55) @2500 rpm
Horsepower per SAE J1349 Net hp (kW) 68 (51) @ 2500 rpm
Peak torque, lb-ft (Nm) 232 (314) @ 1400 rpm
Power Train
Travel speed, low range, mph (km/h) 7.8 (12.5)
Travel speed, high range (optional),mph (km/h) 11.4 (18.3)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 123 (3124)
Top of ROPS, in (mm) 78.7 (1998)
Bottom of level bucket, fully raised,in (mm) 116.1 (2950)
Overall length without attachment with coupler, in (mm) 105.1 (2669)
Dump angle, degrees 40°
Dump reach (max height), in (mm) 20.3 (517)
Rollback, bucket on ground, degrees 31°
Rollback, bucket at full height, degrees 99°
Wheelbase, in (mm) 44.4 (1128)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 25°
Clearance circle without bucket, in(mm) 50.7 (1289)
Clearance circle rear, in (mm) 62.9 (1599)
Rear axle to bumper, in (mm) 36.4 (924)
Overall width, in (mm) 69.1 (1755)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 24.2 (91.5)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 33.2 (125.7)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2100 (905)
Tipping load, lbs (kg) 4000 (1814)
Breakout force, lift cylinder, lbs (kN) 4570 (20.3)
Breakout force, bucket cylinder, lbs (kN) 7270 (32.3)
Operating weight, lbs (kg) 6970 (3160)

New Holland Tractor Loaders U80C

Tractor Loaders U80C

PROFIT-MAKING VERSATILITY
The New Holland U80C tractor loader provides profit-making power on both front and back. Tier 4 engines deliver the power and torque you need for loading and grading while reducing fuel use and emissions.

Engine
Manufacturer/model FPT F5HFL413D*A
Bore x stroke, in (mm) 3.9 x 4.33 (99 x 110)
Displacement, in³ (L) 207 (3.4)
Horsepower (SAE J1349) Gross @ 2,200 rpm, (kW) 85 (63)
Horsepower (SAE J1349)Net @ 2,200 rpm, (kW) 78 (58)
Gross, lb-ft (Nm) 276 (374)
Net, lb-ft (Nm) 268 (364)
Power Train
Differential-lock On the go push-button activation
Travel speeds, mph (km/h) 1st
Forward 3.8 (6.1)
Travel speeds, mph (km/h) 2nd
Forward 6.1 (9.8)
Travel speeds, mph (km/h) 3rd
Forward 13 (21)
Travel speeds, mph (km/h) 4th
Forward 24.3 (39.1)
Dimensions
Long Lip Bucket - 4 IN 1® Bucket
Height to: 19.5 L x 24 Tires - 17.5 L x 24 Tires
Top of canopy, ft/in (m) 8’ 12” (2.73) - 8’ 9” (2.67)
Top of cab, ft/in (m) 8’ 12” (2.74) - 8’ 10” (2.68)
Bucket hinge pin fully raised, ft/in (m) 11’ 2” (3.41)
Bucket hinge pin @ SAE carry, ft/in (m) 1’ 1” (0.33) - 1’ 3” (0.37)
Overall length w/ 3-point hitch, ft/in (m) 16’ 11” (5.15) - 16’ 8” (5.09)
Width over tires: 6’ 10” (2.07)
Dump angle @ full height 46° - 45°
Dump clearance @ full height, 45° dump: 9’ 8” (2.93) - 8’ 11” (2.71)
Clam open, ft/in (m) NA – 8’ 8” (2.63)
Dump reach @ full height, 45° dump:
Bucket, ft/in (m)
2’ 2” (0.66) - 2’ 2” (0.66)
Clam open, in (m) NA - 11.8 (0.29)
Ground clearance at front axle, in (m) 10.9 (0.28)
Wheelbase 4WD, ft/in (m) Wheelbase 2WD, ft/in (m) 7’ 1” (2.15) 7’0” (2.14) - 7’ 1” (2.15) 7’0” (2.14)
Reach from front axle centerline – bucket on ground, ft/in (m) 6’ 3’ (1.89) - 5’ 12” (1.83)
Maximum clam opening, ft/in (m) NA - 3’ 3” (0.97)
Moldboard height, ft/in (m) NA - 3’ 1” (0.93)
Lift capacity to full height, lb (kg) 6,503 (2950) - 6,537 (2965)
Breakout force, Lift cylinders, lb (N) 9,271 (41 239) - 8,766 (38 993)
Breakpout force, Dump cylinders, lb (N) 9,607 (42 734) - 10,325 (45 928)
Travel speeds, mph (km/h) 1st - 2nd
Forward 3.8 (6.1) - 6.1 (9.8)
Travel speeds, mph (km/h) 3rd - 4th
Forward 13 (21) - 24.3 (39.1)

New Holland Skid Steer Loader L220

New Holland Skid Steer Loader L220
THE SUPER BOOM® ADVANTAGE
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model ISM / N844LTA
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135 (2.2)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp (kW) 67 (50) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 64 (47.7) @ 2800 rpm
Peak torque, lb-ft (Nm) 153 (208) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.8 (12.5)
Travel speed, high range (optional),mph (km/h) 11.4 (18.3)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 121 (3073)
Top of ROPS, in (mm) 78.7 (1998)
Bottom of level bucket, fully raised,in (mm) 114.3 (2902)
Overall length without attachment with coupler, in (mm) 105.7 (2697)
Dump angle, degrees 52°
Dump reach (max height), in (mm) 29.8 (758)
Rollback, bucket on ground, degrees 34°
Rollback, bucket at full height, degrees 88°
Wheelbase, in (mm) 44.4 (1128)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 25°
Clearance circle without bucket, in(mm) 50.7 (1289)
Clearance circle rear, in (mm) 62.9 (1599)
Rear axle to bumper, in (mm) 36.4 (924)
Overall width, in (mm) 69.1 (1755)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 20.6 (78)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 30.7 (116.2)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2000 (905)
Tipping load, lbs (kg) 4000 (1814)
Breakout force, lift cylinder, lbs (kN) 3450 (15.3)
Breakout force, bucket cylinder, lbs (kN) 7300 (32.5)
Operating weight, lbs (kg) 6470 (2930)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics