Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Cherokee, Kansas

Are you looking for work-ready & reliable machinery to kick start a construction project in Cherokee ?

Whether you’ve been awarded a construction project already or are exploring potential tie-ups for heavy construction equipment rentals in Cherokee, let us tell you that we can put you in touch with the right vendors within a day or two!

Yes, we’ve onboard a large network of vendors with work-ready construction equipment. You can rent equipment on a daily, weekly or monthly basis, as you see fit. So, you need not spend a dime extra on equipment you acquire on a rental basis.

As soon as you call us at our toll free number or get in touch through the short contact form on the right, we will start working on finding the best vendor for you.

The process normally takes 6 to 48 hours to complete.

Equipment Rental Cherokee, Construction equipment rental Cherokee, Construction Cherokee, Heavy Equipment Rental Cherokee.

New Holland Skid Steer Loader L225

New Holland Skid Steer Loader L225
THE SUPER BOOM® ADVANTAGE
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model FPT / F5H FL413
Bore/stroke, in (mm) 3.9 x 4.1 (99 x 110)
Displacement, in3 (L) 195 (3.2)
Fuel injection HPCR Direct
Air intake Turbocharged with external CEGR
Horsepower per SAE J1349 Gross hp (kW) 82 (61) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW) 76 (57) @ 2500 rpm
Peak torque, lb-ft (Nm) 257 (349) @ 1400 rpm
Power Train
Travel speed, low range, mph (km/h) 7.0 (11.3)
Travel speed, high range (optional),mph (km/h) 10.5 (16.9)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 129.4 (3287)
Top of ROPS, in (mm) 78.8 (2002)
Bottom of level bucket, fully raised,in (mm) 122.6 (3115)
Overall length without attachment with coupler, in (mm) 117.8 (2993)
Dump angle, degrees 55°
Dump reach (max height), in (mm) 32.3 (821)
Rollback, bucket on ground, degrees 34°
Rollback, bucket at full height, degrees 85°
Wheelbase, in (mm) 52 (1322)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 24°
Clearance circle without bucket, in(mm) 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Rear axle to bumper, in (mm) 40.7 (1034)
Overall width, in (mm) 69.6 (1768)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 24.2 (91.5)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2500 (1135)
Tipping load, lbs (kg) 5000 (2268)
Breakout force, lift cylinder, lbs (kN) 5080 (22.6)
Breakout force, bucket cylinder, lbs (kN) 8620 (38.3)
Operating weight, lbs (kg) 7900 (3580)

New Holland Skid Steer Loader L218

L218_main
THE SUPER BOOM® ADVANTAGEN
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model ISM / N844LT
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135 (2.2)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp (kW) 60 (45) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 57 (42) @ 2800 rpm
Peak torque, lb-ft (Nm) 135 (183) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.4 (11.9)
Travel speed, high range (optional),mph (km/h) 10.8 (17.4)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 120 (3048)
Top of ROPS, in (mm) 77.7 (1974)
Bottom of level bucket, fully raised,in (mm) 113.3 (2877)
Overall length without attachment with coupler, in (mm) 105.7 (2697)
Dump angle, degrees 52°
Dump reach (max height), in (mm) 30.8 (783)
Rollback, bucket on ground, degrees 35°
Rollback, bucket at full height, degrees 88°
Wheelbase, in (mm) 44.4 (1128)
Ground clearance (bottom of belly pan),in (mm) 7 (178)
Angle of departure, degrees 23°
Clearance circle without bucket, in(mm) 50.7 (1289)
Clearance circle rear, in (mm) 62.9 (1599)
Rear axle to bumper, in (mm) 36.4 (924)
Overall width, in (mm) 66.1 (1678)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 20.6 (78)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 30.7 (116.2)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 1800 (818)
Tipping load, lbs (kg) 3600 (1633)
Breakout force, lift cylinder, lbs (kN) 2620 (11.7)
Breakout force, bucket cylinder, lbs (kN) 5550 (24.7)
Operating weight, lbs (kg) 5930 (2690)

New Holland Skid Steer Loader L216

Skid Steer Loader 216

MORE DIGGING AND PUSHING POWER BY DESIGN
This model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model ISM / N844LT
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135.2 (2.216)
Fuel injection Indirect
Air intake Turbocharged with external EGR
Horsepower per SAE J1349 Gross hp (kW) 60 (45) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 57 (42) @ 2800 rpm
Peak torque, lb-ft (Nm) 139 (188) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.4 (11.9)
Travel speed, high range (optional),mph (km/h) NA
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 112 (2845)
Top of ROPS, in (mm) 75.5 (1919)
Bottom of level bucket, fully raised,in (mm) 105.6 (2682)
Overall length without attachment with coupler, in (mm) 95.9 (2435)
Dump angle, degrees 40°
Dump reach (max height), in (mm) 18.5 (469)
Rollback, bucket on ground, degrees 26°
Rollback, bucket at full height, degrees 95°
Wheelbase, in (mm) 37 (941)
Ground clearance (bottom of belly pan),in (mm) 7 (178)
Angle of departure, degrees 22°
Clearance circle without bucket, in(mm) 48.7 (1237)
Clearance circle rear, in (mm) 56.4 (1433)
Rear axle to bumper, in (mm) 33.8 (858)
Overall width, in (mm) 59.8 (1518)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 18.4 (69.7)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) -
Performance Specs
Rated operating load, 50% tip, lbs (kg) 1600 (725)
Tipping load, lbs (kg) 3200 (1455)
Breakout force, lift cylinder, lbs (kN) 3310 (14.7)
Breakout force, bucket cylinder, lbs (kN) 5270 (23.4)
Operating weight, lbs (kg) 5510 (2505)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics