Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Coldwater, Kansas

Are you looking for work-ready & reliable machinery to kick start a construction project in Coldwater ?

Whether you’ve been awarded a construction project already or are exploring potential tie-ups for heavy construction equipment rentals in Coldwater, let us tell you that we can put you in touch with the right vendors within a day or two!

Yes, we’ve onboard a large network of vendors with work-ready construction equipment. You can rent equipment on a daily, weekly or monthly basis, as you see fit. So, you need not spend a dime extra on equipment you acquire on a rental basis.

As soon as you call us at our toll free number or get in touch through the short contact form on the right, we will start working on finding the best vendor for you.

The process normally takes 6 to 48 hours to complete.

Equipment Rental Coldwater, Construction equipment rental Coldwater, Construction Coldwater, Heavy Equipment Rental Coldwater.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

Komatsu Trucks HD1500-7
HD1500-7 Off-Highway Truck

The HD1500 has a capacity of 159 tons or 102 yd3. The fully automatic seven speed transmission with lock-up and skip-shift give the operator the speed and response he needs to meet production demands. On down hills, the operator has oil cooled multi-disc retarder and brakes to control his fully loaded truck. A tight turning radius and hydropneumatic suspension make the HD1500-7 very maneuverable in tight quarters and provide a cushioned ride for better load retention and a more comfortable ride.

Engine
Model Komatsu SDA12V160
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled
Number of cylinders 12
Bore x stroke 6.26" x 7.48" 159 mm x 190 mm
Piston displacement 2,746 in³ 45 ltr
Horsepower:
SAE J1995 / Gross 1,487 HP 1109 kW
ISO9249/SAE J1349 / Net 1,406 HP 1048 kW
Rated rpm 1,900 rpm
Fan drive type Mechanical
Maximum torque 5,041 lb ft 697 kg/m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system :
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and pre-cleaned, with dust indicator
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission: Full-automatic, planetary-shaft type
Speed range 7 speeds forward and 1 reverse
Lockup clutch Wet, multiple-disc clutch
Forward Torque converter drive 1st and 2nd gear with direct drive lock-up in 1st through 7th
Reverse Torque converter drive
Shift control Electronic shift control with automatic clutch modulation in all gears
Maximum travel speed 36 mph 58 km/h
Axles
Rear Axle Full-floating
Final drive type Planetary gear
Ratios:
Differential 2.647
Planetary 7.235
Suspension System
Variable rate, hydropneumatic with integral rebound control.
Maximum front stroke 14.76'' 375 mm
Maximum rear stroke 4.17" 106 mm
Rear axle oscillation +/-9.2°
Steering system
Type Fully hydraulic power steering with two double-acting cylinders
Supplementary steering Accumulator assist
Minimum turning radius 40' 12.2 m
Steering angle (left or right) 41°
Cab
Integral 4-post ROPS/FOPS cab structure (meets SAEJ 1040 Apr 88)
Main Frame
Type Box-sectioned structure; Integral front bumper
Brakes
Brakes meet ISO 3450 standard.
Service brakes:
Front Fully hydraulic control, oil-cooled multiple-disc type
Rear Fully hydraulic control, oil-cooled multiple-disc type
Parking brake Spring applied, oil-released, 3 caliper dry disc mounted on input yoke to differential
Retarder Oil-cooled, multiple-disc front and rear brakes act as retarder
Secondary brake Manual - push button operated.
Automatically applied prior to hydraulic system pressure dropping below established level.
Brake surface: 24,668 in² 159148 cm³
Body
Capacity:
Struck 71 yd³ 54 m³
Heaped (2:1 ,SAE) 102 yd³ 78 m³
Nominal payload 158.9 U.S. tons 144.1 metric tons
Material 400 Brinell hardness high tensile strength steel (front, sides, and bottom)
Structure Flat floor configuration
Material thickness:
Bottom 0.75" 19 mm
Front 0.47" 12 mm
Sides 0.35" 9 mm
Target area: (inside length x width) 25'2"x 18'9" 7670 mm x 5705 mm
Dumping angle 45°
Height at full dump 37'6" 11440 mm
Heating Exhaust heating
HyDRaulic System
Hoist cylinder Two, 3-stage telescopic type
Relief pressure 2,750 psi 19.0 MPa 193.4 kg/cm²
Hoist time
Raise 15 sec
Lower 15 sec
Weight (approximate)
Empty weight 232,144 lb 105300 kg
Max. gross vehicle weight: 550,000 lb 249478 kg
Not to exceed max. gross vehicle weight, including options, fuel and payload.
Empty weight is with 100% fuel and operator.
Weight distribution:
Empty:
Front axle 48.6%
Rear axle 51.4%
Loaded:
Front axle 32.8%
Rear axles 67.2%
tires
Standard Tires 33.00 R51
Service Refill Capacities
Fuel tank 560 U.S. gal 2120 ltr
Engine oil 51 U.S. Gal 193 ltr
Hydraulic system 238 U.S. gal 900 ltr
Differentials 78 U.S. gal 297 ltr
Final drives (total) 63.5 U.S. gal 240 ltr
Transmission 40.5 U.S. gal 153 ltr

Komatsu Trucks 730E-8

730E-8 Electric Drive Truck

The 203 ton capacity 730E-8 is a very versatile electric drive truck that features 1,860 flywheel horsepower. The cab has an integral ROPS, air ride seat, dynamic retarding and power steering with auto emergency steering to make the operator comfortable and more productive. To make the 730E more productive, a trolley assist option is available for circumstances where an overhead electrified trolley system can be used.

Engine
Make and model* Komatsu SSDA16V159
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
Gross horsepower** @ 1900 rpm 2,000 HP 1492 kW
Net flywheel power*** @ 1900 rpm 1,884 HP 1405 kW
* Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America.
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC current
Alternator GTA-49
Dual impeller in-line blower 13,900 cfm 393 m³/min
Control AC Torque Control System
Motorized wheels* GEB35 Induction Traction Motors
Ratio 30.8:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, tires
Standard tire* 37.00 R57
Flange mount rim 686 mm x 1448 mm x 152 mm 27'' x 57'' x 6'' rim assembly. Rims rated at 758 kPa 110 psi cold inflation pressure.
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Eyebrow, rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet - Outer (1379 MPa 200,000 psi tensile strength steel) 0.63'' 16 mm
Floor sheet - Center (1379 MPa 200,000 psi tensile strength steel) 0.75'' 19 mm
Front sheet (1379 MPa 200,000 psi tensile strength steel) 0.39'' 10 mm
Side sheet (1379 MPa 200,000 psi tensile strength steel) 0.31'' 8 mm
Canopy sheet (690 MPa 100,000 psi tensile strength steel) 0.24'' 6 mm
Capacity struck 153 yd³ 117 m³
SAE heaped 2:1 193 yd³ 148 m³
Standard Komatsu body weight 62,100 lb 28169 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab, adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material 70,000 psi 482.6 mPa tensile strength steel
Casting material 90,000 psi 620.5 mPa tensile strength steel
Rail width 11.02'' 280 mm
Rail depth (minimum) 31.38'' 797 mm
Top and bottom plate thickness 1.26'' 32 mm
Side plate thickness 0.75'' 19 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
System meets ISO 3450/1996.
Service brakes: all-hydraulic actuated.
Front: Wheel speed disc. Three calipers on a 1213 mm / 47.75" O.D. disc
Rear Dual disc armature speed. Two 635 mm / 25" O.D. discs per side. One caliper per disc.
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch-activated
Parking brakes Spring-applied, hydraulically released, with speed application protection.
Electric dynamic retarder (max.) 3,200 hp / 2387 kW Continuously rated high-density blown grids w/retard at engine idle and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.28'' 312 mm
Max. rear stroke 10.98'' 279 mm
Max. rear axle oscillation ±5.3°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank
Radiator frontal area 50.1 ft² 4.65 m²
Service Capacities
Cooling system 117 U.S. gal 441 L
Crankcase* 59 U.S. gal 223 L
Hydraulic system 210 U.S. gal 795 L
Motor gear box (each) 10 U.S. gal 38 L
Fuel 800 U.S. gal 3028 L
*Includes lube oil filters
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 89' 27.2 m
Reservoir 135 U.S. gal 511 L
Filtration In-line replaceable elements
Suction Single, full-flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 19 sec
Power-down 10.5 sec
Float--down empty 12 sec
Pumps: Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 666 lpm 176 gpm at 1900 rpm and 18961 kPa 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 254 lpm 67 gpm at 1900 rpm and 19134 kPa 2,775 psi
System relief pressures:
Hoist 2,500 psi 17237 kPa
Steering and brake 4,000 psi 27580 kPa
Electric System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24-volt 250 amp
Lighting 24 volt
Cranking motors Two/24 volt

New Holland Wheeled Excavators WE 150B PRO

Specifications
Engine Power 90 kW/121 hp
Operating weight 15.6/16.4 t

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics